Ditek DTK-MRJTLC Specsheet

Power outages, surges, and voltage transients on data lines can be deadly to critical data/comm equipment. DITEK’s DTK-MRJTLC surge protector is designed specifically to protect the Rauland-Borg Telecenter VI communications/ safety system. The MRJTLC protects Telecenter VI Telco, Clock and Call Circuits for each portable classroom.

NOTE:To ensure optimum Telecenter VI system protection, apply primary lightning arresters at each building entrance and surge protection in each remote classroom.

DTK-MRJTLC

Features

• Protects Telecenter VI runs from the controller to the classroom

• Voltage-matched pairs protect all four circuits in one product

• SAD technology provides optimal circuit protection

• Single point ground improves protection and speeds installation

• Ten Year Limited Warranty

DTK-MRJTLC

Telecenter VI Surge Protector

General Product Specifications

Specifications

• Connection Method: RJ45 (8-wire) In/Out

• Continuous Current: 0.5A Telco,

1.0A Speaker, Clock, Call In

• Max. Surge Current: 100A per line (10/1000µs impulse)

• Protection Modes: All Lines – Ground

• Dimensions: 1.3 ”H x 2.4” W x 3.0”D

(33mm x 61mm x 76mm)

• Weight: 4 oz. (113g)

• Housing: ABS

Telecenter VI and Rauland-Borg areTMRauland-Borg Corporation

One DITEK Center 1720 Starkey Road Largo, FL 33771

1-800-753-2345 Direct 1-727-812-5000

Technical Support: 1-888-472-6100

www.ditekcorp.com

DTK-MRJTLC

Telco (Pins 4 & 5)

Speaker (Pins 1 & 2)

Clock (Pins 7 & 8)

Call In (Pins 3 & 6)

Service Voltage

MCOV

Clamping

Voltage

48V 180V 250V

25V

12V

Doc. Number: SPS-100042-004 Rev 1 3/08

45V 60V

20V 28V

Specification Subject to Change

60V45V