Every precaution has been taken to ensure that this literature is accurate and complete. DITEK Corporation assumes no responsibility and disclaims all liability for damages resulting from the use of this information or for any errors or omissions.
One DITEK Center 1720 Starkey Road - Largo, FL 33771
Phone: 1-800-753-2345 Direct: 727-812-5000
Technical Support: 1-888-472-6100
www.diteksurgeprotection.com
Doc. Number: SPS-100042-010 Rev 2 03/17
©2017 DITEK Corp.
Page 1 of 1
Line-Ground (All)
Line-Line (All)
Mechanical Characteristics
5.7”L X 2.54”W x 1.56”H
(144.8mm x 64.5mm x 39.6mm)
Quality, Standards & Approval
UL497B DTK-VM45POE
UL508A Housing
CAT5e, EIA/TIA568A, EIA/TIA568B
Ten Year Limited Warranty
Max Data
Transmission
Speed
DITEK’s DTK-MRJPOEX protects externally mounted
Power over Ethernet devices. The NEMA 4X enclosure,
with Liquid-Tight Cordgrips provide a watertight connection
when installed in harsh/outdoor environments. When used
with STP cabling, the DTK-MRJPOEX does not require a
separate earth ground. Its multi-stage, hybrid design
provides superior protection for all your Power over Ethernet
devices.
Applications
Outdoor Ethernet Equipment
PoE Cameras
Wireless Access Points
Power over Ethernet Devices
* Cabling information obtained from TIA-568-C.2
Accessories
Field replaceable module- DTK-VM45POE
Product Features
Uses SAD and GDT technologies
Shielded RJ45 connections
NEMA 4X enclosure for outdoor locations
Gigabit Ethernet data speed without signal
degradation
Compatible with CAT5e, CAT6 and CAT6A
cabling infrastructure
Complies with IEEE Std. 802.3af and 802.3at
for PoE
PoE Plus, HiPoE ready for high-wattage
applications