Ditek DTK-MRJPOES Specsheet

Every precaution has been taken to ensure that this literature is accurate and complete. DITEK Corporation assumes no responsibility and disclaims all liability for damages resulting from the use of this information or for any errors or omissions.

One DITEK Center 1720 Starkey Road - Largo, FL 33771 Phone: 1-800-753-2345 Direct: 727-812-5000 Technical Support: 1-888-472-6100

www.diteksurgeprotection.com

Technical Specifications

Service Voltage:

48V

MCOV:

64V

Clamping Voltage:

72V

Protection Modes:

Line-Ground (All)

Line-Line (All)

Surge Current Rating:

20kA/Pair

Max. Continuous Current:

1.5 Amps

Power Handling:

144 Watts

Data Rate:

1000 Mbps

Mechanical Characteristics

Connection Method:

Shielded RJ45 In/Out

Housing:

ABS

Operating Temperature:

-40F – 158F (-40C – 70C)

Maximum Humidity:

95% non-condensing

Dimensions:

3.0”L X 1.7”W x 1.2”H

(76mm x 43mm x 30mm)

Weight:

4oz (113g)

Quality, Standards & Approval

Agency Approvals:

UL497B

Standards Compliance:

CAT5e, EIA/TIA568A,

EIA/TIA568B

Warranty:

Ten Year Limited Warranty

Category

Max Data

Transmission

Speed

Max

Bandwidth

Typical

Distance

CAT3

10 Mbps

16 MHz

100 m

CAT5

10 / 100 Mbps

100 MHz

100 m

CAT5e

1 Gbps

100 MHz

100 m

CAT6

1 Gbps

250 MHz

100 m

CAT6A

10 Gbps

500 MHz

100 m

DITEK’s DTK-MRJPOES is designed with state-of-the-

art circuitry to provide superior protection for Shielded Power over Ethernet connections. This point of use surge protector can be installed at the equipment end, or ahead of injectors and midspan devices. When used with STP cabling, the DTK-MRJPOES does not require a separate earth ground. Its multi-stage, hybrid design provides superior protection for all your Ethernet devices.

Applications

 PoE IP Cameras, NVR’s  Wireless Access Points  Power over Ethernet Devices

* Cabling information obtained from TIA-568-C.2

Accessories

 DIN Rail Mounting Kit – Part Number DTK-DRK

Product Features

 Uses SAD and GDT technologies  Shielded RJ45 connection with external

grounding screw

 Gigabit Ethernet data speed without signal

degradation

 Compatible with CAT5e, CAT6 and CAT6A

cabling infrastructure

 Complies with IEEE Std. 802.3af and 802.3at

for PoE

 PoE Plus, HiPoE ready for high-wattage

applications