Ditek DTK-MRJETHS Specsheet
Every precaution has been taken to ensure that this literature is accurate and complete. DITEK Corporation assumes no responsibility and disclaims all liability for damages resulting from the use of this information or for any errors or omissions.
One DITEK Center 1720 Starkey Road - Largo, FL 33771
Phone: 1-800-753-2345 Direct: 727-812-5000
Technical Support: 1-888-472-6100
www.diteksurgeprotection.com
Doc. Number: SPS-100090-002 Rev 2 06/17
©2017 DITEK Corp.
Page 1 of 1
Technical Specifications
Service Voltage:
<5V
MCOV:
6.5V
Clamping Voltage:
7.67V
Protection Modes:
Line-Ground (All)
Line-Line (All)
Surge Current Rating:
20kA/Pair
Data Rate:
1000 Mbps
Mechanical Characteristics
Connection Method:
Shielded RJ45 In/Out
Housing:
ABS
Operating Temperature:
-40F – 158F (-40C – 70C)
Maximum Humidity:
95% non-condensing
Dimensions:
3.0”L x 1.7”W x 1.2”H
(76mm x 43mm x 30mm)
Weight:
4oz (113g)
Quality, Standards & Approval
Agency Approvals:
UL497B
Standards Compliance:
CAT5e, EIA/TIA568A,
EIA/TIA568B
Warranty:
Ten Year Limited Warranty
Category
Max Data
Transmission
Speed
Max
Bandwidth
Typical
Distance
CAT3
10 Mbps
16 MHz
100 m
CAT5
10 / 100 Mbps
100 MHz
100 m
CAT5e
1 Gbps
100 MHz
100 m
CAT6
1 Gbps
250 MHz
100 m
CAT6A
10 Gbps
500 MHz
100 m
DITEK’s DTK-MRJETHS protects shielded data lines to
vital business equipment. Its low voltage clamping is ideal for
protecting sensitive 5 Volt data circuits. The MRJETHS
protects all four pairs, and is suitable for use on any piece of
networked equipment. When used with STP cabling, the
DTK-MRJETHS does not required a separate earth ground.
Product Features
Protects all four data pairs
Shielded RJ45 connection with external
grounding screw
Multi-stage, SAD technology, hybrid design
provides the best possible protection
Compatible with CAT5e, CAT6 and CAT6A
cabling infrastructure
Conforms to EIA/TIA standards for data
transmission
Automatically resets to protect against multiple
surges
Applications
Data Networks, POS Terminals
IP Video Cameras
Accessories
DIN Rail Mounting Kit – Part Number DTK-DRK
* Cabling information obtained from TIA-568-C.2
Loading...