Ditek DTK-MRJ45SCPLV, DTK-MRJ45SCPOPX, DTK-MRJ45SCPRUV, DTK-MRJ45SCPX Specsheet

Every precaution has been taken to ensure that this literature is accurate and complete. DITEK Corporation assumes no responsibility and disclaims all liability for damages resulting from the use of this information or for any errors or omissions.

One DITEK Center 1720 Starkey Road - Largo, FL 33771
Phone: [phone] Direct: 727-812-5000
Technical Support: 1-888-472-6100

www.diteksurgeprotection.com

Doc. Number: SPS-100042-002 Rev 6 06/17
©2017 DITEK Corp.
Page 1 of 2

Technical Specifications

DTK-MRJ45SCP

X

LV

OPX

RUV

Service Voltage:

12V

24V

48V

130V

MCOV:

18VDC

33VDC

66VDC

175VDC

Clamping Voltage:

47V

47V

82V

204V

Protection Modes:

Tip-Ground, Ring-Ground (All)

Surge Current Rating:

2,000A/pair (5V – 48V)

9,000A/pair (130V)

Max Continuous
Current:

0.15 Amps

Mechanical Characteristics

Connection Method:

RJ45

Housing:

ABS

Operating
Temperature:

-40°F - 158°F (-40°C - 70°C)

Maximum Humidity:

95% non-condensing

Dimensions:

3.0”L x 1.7”W x 1.2”H

(76mm x 43mm x 30mm)

Weight:

4 oz (113 g)

Quality, Standards & Approval

Agency Approvals:

UL497A

Warranty:

Ten Year Limited Warranty

DITEK’s DTK-MRJ45 Series protects vital data and

communication circuits from surge-induced damage.
Convenient RJ connections protect four voice, data and/or
signal pairs. MRJ45 Series surge protectors are easily installed

at a building’s incoming entry, and at the equipment being

protected.

Product Features

 Protects all four pairs, RJ45 connections
 Multi-stage, hybrid design provides the best

possible protection

 Current-limiting circuitry minimizes risk to

connected equipment

 Five voltage levels available to protect all types

of voice/data applications

 Automatic resetting fuse and sneak current

protection.

Applications

 Central Office Lines
 Building-to-Building Runs
 Station Lines
 Low Voltage Data
 P.O.T.S. Lines

Accessories

 DIN Rail Mounting Kit – Part Number DTK-DRK