Ditek DTK-MRJ45SCPD Specsheet

DTK-MRJ45 Series

DITEK’s MRJ45 series protects vital data lines and
computerized systems from surge-induced damage.
Convenient RJ connections protect four
voice/data/signal pairs.

MRJ45 series protectors are easily installed at a
building’s incoming entry, at the equipment being
protected, or any point between them. The MRJ
series is perfect to protect incoming CO lines,
station lines, low voltage data, and building-to­building runs.

DTK-MRJ45

Product Features

• Protects 4 pairs, RJ45 connections

• Multi-stage, hybrid design provides the best
possible protection

• Current-limiting c irc u itr y minimizes ris k to
connected equipment

• Suitable for use on 5V – 130V circuits

Selection Guide

DTK- MRJ##SCP###

Connector Type:: RJ45
Voltage Level: D, X, LV, OPX, RUV

(see table to right for voltage ranges)

Example: DTK-MRJ45SCPD

Specifications

Agency Approvals: UL497A
Connection Method: RJ45
Max Continuous Current: 0.15 Amps
Max Surge Current: 2,000 Amps per pair (6V-50V)

9,000 Amps per pair (130V)

Protection Modes: Tip-Ground, Ring-Ground (All)
Operating Temperature: -40°F - 158°F (-40°C - 70°C)
Maximum Humidity: 95% non-condensing
Dimensions: 1.7” x 3.0” x 1.2”

(43mm x 76mm x 30mm)

Weight: 4oz (113g)
Housing: ABS

Warranty: Ten Year Limited Warranty

Model
DTK-

MRJSCP###
D 0-6 V 8VDC 12V
X 14 V 18VDC 22V
LV 30 V 38VDC 47V
OPX 50 V 66VDC 82V
RUV 130 V 175VDC 204V

RJ45 Series Surge Protection

General Product Specifications

DTK-MRJ14SCPRUV

Service
Voltage MCOV

Clamp
Voltage

One DITEK Center
1720 Starkey Road
Largo, FL 33771

1-800-753-2345 Direct: 1-727-812-5000

Technical Support: 1-888-472-6100

www.ditekcorp.com

Document: SPS-100042-002 Rev 3 05/14

©2014 DITEK Corp.

Specification Subject to Change