Ditek DTK-MRJ45M130 Specsheet
DTK-RM12FP
Rack Mount Modular Surge Protection
General Product Specifications
DITEK’s DTK-RM12FP is a high performance device, designed to provide protection for analog, digital, and high
speed data circuits all terminating at the same point of use. The RM12FP can be used for rack mount, back
plane mount or on a hinged wall mount bracket. This design allows you to mix and match up o 12 ports per
face plate, using RJ45 and BNC interface modules.
DTK-MRJ45C5EM
• IP Camera Feeds
• Ethernet Connections
• RS485 Circuits
DTK-MRJPOEM
• PoE+ Camera Feeds
• PoE+ Access Control
DTK-MRJ45M12
• RS232 Circuits
DTK-MRJ45M24
• Digital Phones
• Intercom Systems
DTK-MRJ45M36
• Communication Loops
DTK-MRJ45M48
• Off Premise Extension
• 48V Dialer Circuit
DTK-MRJ45M75
• Speaker Circuits
DTK-MRJ45M130
• Analog Dialer
• Ring Up Voltage
• POTS Line
DTK-VSPBNCM
• Analog Camera Feeds
Performance Data
Service
Voltage
DTKMRJ45C5EM
<5V 48V 14V 24V 36V 48V 75V 130V 1V
MCOV 6.5V 64V 24V 33V 48V 64V 90V 175V 2V
Clamp
Voltage
6.8V 72V 28V 39V 56V 72V 105V 204V 2.8V
Peak
Surge
268A/pair 30A/pair 77A/pair 60A/pair 40A/pair 30A/pair 20A/pair 9KA/pair 20KA
Current
DTKMRJPOEM
DTKMRJ45M12
DTKMRJ45M24
DTKMRJ45M36
DTKMRJ45M48
DTKMRJ45M75
DTKMRJ45M130
DTKVSPBNCM
One DITEK Center
1720 Starkey Road
Largo, FL 33771
1-800-753-2345 Direct: 727-812-5000
Technical Support: 1-888-472-6100
www.ditekcorp.com
Doc. Number: SPS-100072-001 Rev 3 4/13
©2011 DITEK Corp.
Specification Subject to Change
Loading...