Ditek DTK-IBNC2-8, DTK-IBNC6.8 Specsheet

DITEK’s iBNC inline surge protectors are designed to protect externally-mounted cameras where a dedicated ground connection is unavailable. The iBNC diverts transient surges through the coaxial shielding, protecting the video feed without introducing ground loops. Solid performance and easy installation make the iBNC a favorite of CCTV integrators.
DTK-iBNC2.8 DTK-iBNC6.8
Application Features
• Protects fixed or Coaxitron (PTZ) camera video feeds
• Small footprint makes installation easy
• Recommended for applications where AC power is already protected and ground is unavailable
• Ten Year
Coaxial Line Surge Protector
General Product Specifications
Selection Guide
Fixed cameras: DTK-iBNC2.8 Coaxitron cameras: DTK-iBNC6.8
Specifications:
Agency Approvals: UL497B Connection Method: BNC Female In/Out Protection Type: Analog Video Service Voltage: -1V – 1V
Max. Continuous Current: 0.2A Voltage Clamping: 2.8VDC, 6.8VDC Peak Surge Current: 20,000 Amps (10/1000 µsec impulse) Coaxial Band Pass Range: 0Hz – 10MHz, Return Loss: 22dB RL @ 10MHz Insertion Loss: <0.3dB/Channel Impedance: 75 Ohms Protection Modes: Center Pin – Shield Dimensions: 3.6” H x 1.1” Diameter (91mm x 28mm) Weight: 2.5oz (71g)
Housing: Aluminum
DTK-iBNC2.8 DTK-iBNC6.8
Service Voltage
Impedance 75 Ohms 75 Ohms
Voltage Clamping
Peak Surge Current
±1V peak-peak 5VDC
2.8VDC 6.8VDC
20,000 A 20,000 A
One DITEK Center 1720 Starkey Road Largo, FL 33771
1-800-753-2345 Direct: 1-727-812-5000
Technical Support: 1-888-472-6100
www.ditekcorp.com
Document: SPS-100038-001 Rev 5 09/14
©2014 DITEK Corp.
Specification Subject to Change
Loading...