Ditek DTK-GLI Specsheet

Every precaution has been taken to ensure that this literature is accurate and complete. DITEK Corporation assumes no responsibility and disclaims all liability for damages resulting from the use of this information or for any errors or omissions.
One DITEK Center 1720 Starkey Road - Largo, FL 33771 Phone: 1-800-753-2345 Direct: 727-812-5000 Technical Support: 1-888-472-6100
www.diteksurgeprotection.com
Technical Specifications
Insertion Loss:
1.1dB (5 MHz)
Impedance:
75 Ohms
Common Mode Ground Loop Rejection Rate:
90 dB at 50/60 Hz
Dielectric Withstand Voltage:
1000VAC @ 60 Hz for 2 seconds
Mechanical Characteristics
Connection Method:
BNC Female In/Out
Housing:
ABS
Operating Temperature:
-40F – 158F (-40C – 70C)
Maximum Humidity:
95% non-condensing
Dimensions:
3.0L x 2.4”W x 1.3”H (76.20mm x 0.96mm x 33.02mm)
Weight:
4oz (113g)
Quality, Standards & Approval
Warranty:
Ten Year Limited Warranty
DITEK’s DTK-GLI DITEK’s GLI (Ground Loop Isolator)
is a passive device that utilizes state-of-the-art hybrid circuit technology to reduce video distortion caused by ground loop interference. The GLI corrects most common ground loop problems, including video distortion; and eliminates picture tearing, cross talk and rolling. The GLI is ideal for use where a video signal is transmitted via cable between points with different ground potentials, typically caused by unbalanced power loads. The result is the presence of AC current in the cable shield.
Applications
Installed prior to recording device and monitor
Product Features
Prevents video signal distortion caused by
conflicting power loads
Passive device allows for two-way
communication of control/video
Multi-stage, hybrid design – connects in seriesSmall footprint easy installation
Loading...