Ditek DTK-ESS User Manual

INSTALLATION INSTRUCTIONS

DTK-ESS (Electric Switch Suppressor)

The Ditek DTK-ESS kit is intended for use on electrical switching devices that are
connected through or that are actuated by a relay contact on access control panels.
The DTK-ESS kit consists of 2 suppressors. 1- protects the control panel, the 2nd
protects the relay contacts. Both protect against transients that are the result of the
collapsing electrical field of an electromagnetic switching device. Like that of an
electric door strike.

CONTROL PANEL

DTK-ESS

DTK-ESS

+

ELECTRICAL
SWITCHING
DEVICE

-

+

POWER SOURCE

12 OR 24 VOLTS

AC OR DC

TERMINAL STRIP

Each electrical switching device will require 1- suppressor to be installed across
the relay contacts located at the control panel, and the 2nd suppressor to be
installed across the leads of the switching device solenoid. The DTK-ESS is a
bipolar device and can be installed without regard to polarity.

-

Diversified Technology Group, Inc.

1720 Starkey Road Largo, Florida 33771

Tel. [phone] Fax [phone]

SCALE:

DATE:

6-24-99

DESCRIPTION: PART NO. REV.

INSTALLATION INSTRUCTION, DTK-ESS

MATERIAL:

FINISH:

DRAWN BY: RWMAPPROVED BY:

REVISED:

191398

DRAWING NUMBER

INT-100047-001

0