Ditek DTK-DRP16B Specsheet

Every precaution has been taken to ensure that this literature is accurate and complete. DITEK Corporation assumes no responsibility and disclaims all liability for damages resulting from the use of this information or for any errors or omissions.
One DITEK Center 1720 Starkey Road - Largo, FL 33771 Phone: 1-800-753-2345 Direct: 727-812-5000 Technical Support: 1-888-472-6100
www.diteksurgeprotection.com
Technical Specifications
Service Voltage:
120VAC
MCOV:
130VAC
Clamping Voltage (Video):
2.8V (DRP16)
6.8V (DRP16B, RJ45 Ethernet)
Protection Modes:
L-G, L-N, N-G
Surge Current Rating:
54,000 Amps (Power)
240 Amps/Channel (Video)
Max. Continuous Current:
12 Amps
Operation Frequency:
0Hz – 10MHz
Battery Type:
12V/7AH (Field Replaceable)
Battery Load Rating:
450VA/250W Max
Battery Transfer Time:
< 4 ms
Battery Run Time (Approx):
12 – 22 Minutes
Low Voltage Transfer to UPS:
95VAC
High Voltage Transfer to UPS:
135VAC
Mechanical Characteristics
Connection Method:
Coax (DRP16M)
Coax-Balun (DRP16BM)
Dimensions:
17“l x 7.5“W x3.5 “h
(432mm x 190mm x 88mm)
Weight:
14 lb (6.3kg)
Quality, Standards & Approval
Warranty:
Three Year Limited Warranty
Power outages, surges and voltage transients on video, data and power lines can render DVRs and security
cameras inoperable when they are needed most. DITEK’s
DTK-DRP16 Series combines battery backup with top
quality power, data and video surge protection to ensure continuation of service during these damaging electrical events.
Accessories
Rack mount Kit DTK-DRPMBKReplacement Battery DTK-B12RT7Replacement Modules shown below:
Product Features
Protects two AC outlets, 16 video channels and 8-
wire RJ45 connections
Up to 22 minutes of DVR backup power on one
outlet
Can be used as a standalone unit or mounted in a
2U height, 19” rack
SAD technology provides optimal circuit protection
for analog, HD-CVI, AHD and HD-TVI signals
Tight video clamping without signal lossDry contact for remote monitoring
Coax: DTK-DRP16M
Passive Balun: DTK-DRP16BM
Loading...