Ditek DTK-BU600PLUS Specsheet

Every precaution has been taken to ensure that this literature is accurate and complete. DITEK Corporation assumes no responsibility and disclaims all liability for damages resulting from the use of this information or for any errors or omissions.
One DITEK Center 1720 Starkey Road - Largo, FL 33771 Phone: 1-800-753-2345 Direct: 727-812-5000 Technical Support: 1-888-472-6100
www.diteksurgeprotection.com
Technical Specifications
Service Voltage:
110VA - 120VAC
MCOV:
127VAC
Protection Modes:
L-N, L-G, N-G
Voltage Protection Rating (VPR):
400V L-N; 500V L-G, N-G
Surge Current Rating:
135,000 Amps
Max. Continuous Current:
12 Amps
EMI/RFI Noise Filtering:
Up to 40dB, 150kHz – 100MHz
Load Rating:
600VA/360W
Battery Run Time:
12-22 Minutes
Battery Replacement:
DTK-B12RT
Low Voltage Transfer to UPS
95VAC Typical
High Voltage Transfer to UPS:
135VAC Typical
Transfer Time:
4msec
CAT5 Protection:
Yes
Shutdown Software:
Yes
Mechanical Characteristics
Housing:
ABS
Dimensions:
15L x 6.25“W x 3H
(381mm x 159mm x 76mm)
Weight:
8.2 lb (3.7 kg)
Quality, Standards & Approval
Agency Approvals:
UL 1449, UL497A, UL1363,
UL1778, cUL
SPD Type:
Type 3 SPD
Warranty:
3 Year Limited Warranty
DITEK’s DTK-BU600PLUS combines robust surge
protection with line-interactive battery backup for optimal equipment protection. This combination of surge protection and UPS enables your equipment to survive the most common and the most noticeable power quality problems that users experience. The DITEK BU600PLUS is a cost­effective solution for PCs, DVR/NVRs, PC-based phone systems, POS terminals, or similar applications.
Product Features
Cost-effective solution for computers,
multiplexers, DVRs, or PC-based phone systems
12-22 minutes battery run time (typical)Automatic shutdown software includedRJ45 Phone/modem line protection includedSeven surge protected outlets, 3 with UPS
power
Four transformer-spaced outletsSliding outlet covers for safety6 foot power cord with 360 degree rotating plugAudible alarm for notification of power loss or
low battery charge
Diagnostic LEDs indicate status of surge
protection, outlet wiring, and battery charge
Applications:
Home Work StationsPOS TerminalsSmall Phone Systems
Loading...