Ditek DTK-2MHLP12B, DTK-2MHLP12BWB, DTK-2MHLP24B, DTK-2MHLP24BWB, DTK-2MHLP5B Specsheet

Every precaution has been taken to ensure that this literature is accurate and complete. DITEK Corporation assumes no responsibility and disclaims all liability for damages resulting from the use of this information or for any errors or omissions.

One DITEK Center 1720 Starkey Road - Largo, FL 33771
Phone: [phone] Direct: 727-812-5000
Technical Support: 1-888-472-6100

www.diteksurgeprotection.com

Doc. Number: SPS-100010-001 Rev 15 04/17
©2017 DITEK Corp.
Page 1 of 2

Technical Specifications

DTK-2MHLP

5B

12B

24B

36B

48B

75B

Service Voltage:

5V

12V

24V

36V

48V

75V

MCOV:

6V

18V

33V

48V

64V

90V

Clamping Voltage:

6.8V

21.6V

39V

57V

76V

108V

Protection Modes:

Line-Ground (All)

Surge Current
Rating:

20,000 Amps

Max Continuous
Current:

5 Amps

Data Rate:

200kbps to 2Mbps

Mechanical Characteristics

Base Connection
Method:

10AWG max screw terminals

Module Connection
Method:

Edge card into mounting base

Housing:

ABS

Operating
Temperature:

-40°F - 158°F (-40°C - 70°C)

Maximum Humidity:

95% non-condensing

Dimensions:

Module

2.1”L x 1.4W x 1.9”H

(53mm x 36mm x48mm)

Module with Base

3.25L” x 1.5”W x 2.6”H

(83mm x 38mm x 66mm)

Weight:

1.2 oz (34g)

2.8 oz (79g)

Quality, Standards & Approval

Agency Approvals:

UL497B

Warranty:

Ten Year Limited Warranty

Accessories

 To order Module with Base, add “WB” to end of

part number

 Test Module Kit – Part Number DTK-2MHLPTM
 DIN Rail Mounting Kit – Part Number DTK-DRK

Applications

 Fire Alarm Panel NAC, SLC, PIV and IDC Circuits
 Burglar Alarm Panels NAC and IDC Circuits
 70V Speakers and Audio Equipment
 Low-Voltage Landscape Lighting and Lighting

Control Circuits

 4-20mA Current Loops

DITEK’s DTK-2MHLPB series of signal, data and loop

circuit surge protectors provide robust protection in a
compact package. This series was designed for ease of
installation, with convenient field-replaceable modules and
a Snap-Track base system, allowing the installer to protect
multiple circuits while utilizing a common ground point.

Product Features

 Protects two pairs per module
 Multi-stage, SAD technology, hybrid design,

provides the best possible protection

 Field replaceable, modular edge card connection

design with a single point ground for fast
installation, saves time

 Six voltage levels available to protect all types of

voice/data applications

 Hard-wired multi-base mounting system allows

you to protect up to ten pairs with a common
ground. See next page for base part numbers

 Suitable for use on both AC and DC circuits

DTK-2MHLP24B

DTK-2MHLP24BWB

Page 2 of 2

Part Number

# Pairs

Protected

Dimensions

DTK-MB10

2

3.25”H x 1.50”W (82.5mm x 38.1mm)

DTK-2MB

4

3.25”H x 3.00”W (82.5mm x 76.2mm)

DTK-3MB

6

3.25”H x 4.50”W (82.5mm x 114.3mm)

DTK- 4MB

8

3.25”H x 6.00”W (82.5mm x 152.4mm)

DTK- 5MB

10

3.25”H x 7.50”W (82.5mm x 190.5mm)

DTK-MB10

Base Part Numbers and Dimensions

DTK-2MB

DTK-3MB

DTK-4MB

DTK-5MB