Ditek DTK-2MHLP12F, DTK-2MHLP12FWB Specsheet

Every precaution has been taken to ensure that this literature is accurate and complete. DITEK Corporation assumes no responsibility and disclaims all liability for damages resulting from the use of this information or for any errors or omissions.

One DITEK Center 1720 Starkey Road - Largo, FL 33771 Phone: 1-800-753-2345 Direct: 727-812-5000 Technical Support: 1-888-472-6100

www.diteksurgeprotection.com

Technical Specifications

DTK-2MHLP

12F

24F

36F

48F

75F

Service Voltage:

12V

24V

36V

48V

75V

MCOV:

18V

33V

48V

64V

90V

Clamping Voltage:

6.8V

21.6V

39V

57V

76V

108V

Protection Modes:

Line-Ground (All)

Surge Current Rating:

20,000 Amps

Max Continuous Current:

1 Amp

Data Rate:

200kbps to 2Mbps

Mechanical Characteristics

Base Connection Method:

10AWG max screw terminals

Module Connection Method:

Edge card into mounting base

Housing:

ABS

Operating Temperature:

-40°F - 158°F (-40°C - 70°C)

Maximum Humidity:

95% non-condensing

Dimensions:

Module

2.1”L x 1.4W x 1.9”H

(53mm x 36mm x48mm)

Module with Base

3.25L” x 1.5”W x 2.6”H

(83mm x 38mm x 66mm)

Weight:

1.2 oz (34g)

2.8 oz (79g)

Quality, Standards & Approval

Agency Approvals:

UL497B

Warranty:

Ten Year Limited Warranty

Accessories

 To order Module with Base, add “WB” to end of

part number

 Test Module Kit – Part Number DTK-2MHLPTM  DIN Rail Mounting Kit – Part Number DTK-DRK

Applications

 Circuits that operate at less than 1 Amp  Fire Alarm Panel SLC, PIV and IDC Circuits  Burglar Alarm Panel IDC Circuits



4-20mA Current Loops

DITEK’s DTK-2MHLPF series of loop circuit surge

protectors provide robust protection in a compact package. This series was designed to remove load instead of shorting to ground. Convenient field-replaceable modules offer ease of installation, and the Snap-Track base system allows installers to protect multiple circuits while utilizing a common ground point.

Product Features

 Protects two pairs per module  Exclusive load removal feature  Multi-stage, SAD technology, hybrid design,

provides the best possible protection

 Field replaceable, modular edge card connection

design with a single point ground for fast installation, saves time

 Six voltage levels available to protect all types of

voice/data applications

 Hard-wired multi-base mounting system allows

you to protect up to ten pairs with a common ground. See next page for base part numbers

 Suitable for use on both AC and DC circuits

DTK-2MHLP24F

DTK-2MHLP24FWB

Page 2 of 2

Part Number

# Pairs

Protected

Dimensions

DTK-MB10

3.25”H x 1.50”W (82.5mm x 38.1mm)

DTK-2MB

3.25”H x 3.00”W (82.5mm x 76.2mm)

DTK-3MB

3.25”H x 4.50”W (82.5mm x 114.3mm)

DTK- 4MB

3.25”H x 6.00”W (82.5mm x 152.4mm)

DTK- 5MB

3.25”H x 7.50”W (82.5mm x 190.5mm)

DTK-MB10

Base Part Numbers and Dimensions

DTK-2MB

DTK-3MB

DTK-4MB

DTK-5MB