Ditek DTK-1TPV, DTK-2TPV Specsheet

Twisted Pair Video Camera Surge Protector

DITEK’s TPV series of video surge protectors address a key vulnerability of Twisted Pair Video CCTV systems – the video wire. Lacking even the minimal amount of protection that a shielded coaxial line has, Twisted Pair Video systems are vulnerable to surges entering on the unshielded video wiring, potentially damaging cameras, converters, or head end equipment.

DTK-1TPV DTK-2TPV DTK-4TPV Application Features

• 1, 2 or 4 pair models available to prote ct singl e or multiple video lines

• Suitable for use at the camera, conv ert er, or DVR

• Hybrid design provides the best possible protection

• Single point ground improves protection and speeds installation

DTK-TPV Series

General Product Specifications

Product Features

• Connection Method: #26 - #16 AWG

• Band Pass Range: 0Hz – 10MHz

• Insertion Loss: < 0.5dB up to 10MHz

• Protection Modes: Positive – G, Negative – G

• Maximum Continuous Current: 150mA

• Dimensions: 3.0”H x 1.6” W x 1.6”D (76 x 41 x 41mm)

• Weight: .55lb (250g)

• Operating Temperature: -40°F – 176°F

(-40°C – 80°C)

• Housing: ABS

• Warranty: Ten Year Limited Warranty

One DITEK Center 1720 Starkey Road Largo, FL 33771

1-800-753-2345 Direct: 1-727-812-5000

Technical Support: 1-888-472-6100

www.ditekcorp.com

Technical Specifications

DTK-_TPV Video

(Twisted Pair)

Service Voltage 5V

Voltage Clamping 6.8VDC

Typical Let-Through Voltage

Peak Surge Current 120 Amps per pair

Document: SPS-100063-001 Rev 1 9/07

Specification Subject to Change

7.4V