Ditek DTK-120SR Specsheet

DTK-120SR

54kA Series Connected Surge Protector

General Product Specifications

DITEK’s DTK-120SR protects 120V power on electrical circuits and control panels. The hybrid series design provides maximum critical load protection, with EMI/RFI filtering. The 120SR is ideal for use in UL Listed control panels where a UL Recognized Component is required for control panel certification.

Use DITEK’s DTK-TSS4 when a UL Listed series surge protector is required.

DTK-120SR

Product Features

• Series design for fast response and best protection

• Compact design fits in a variety of

control panels

• Suitable for use on circuit breakers rated at 10kA AIC

• Multi-stage hybrid circuit design

• EMI/RFI filtering

• LED indicates protection status

• UL1449 3rd Edition Recognized

component

• Ten Year Limited Warranty

One DITEK Center 1720 Starkey Road Largo, FL 33771

1-800-753-2345 Direct 1-727-812-5000

Technical Support: 1-888-472-6100

www.ditekcorp.com

Specifications

Agency Approvals: UL1449 3rd Edition, cUL, UL1283 Protector Type:

Type 2 Component Assembly for use in Type 2 Applications

Nominal Discharge Current Rating (In): 3kA SCCR: 10kA Operating Voltage: 120VAC MCOV: 150VAC Peak Surge Current: 54,000 Amps

Maximum Continuous Current: 20A

EMI/RFI Attenuation: Up to 35dB, 100kHz-100MHz Protection Modes: All modes (L-N, L-G, N-G) Voltage Protection Rating: 600V Temperature Range: 32°F – 104°F (0°C - 40°C) Dimensions: 6.87” x 3.50” x 2.50”

(174.50 mm x 88.90 mm x 63.50 mm)

Weight: 12.16 oz. Housing: ABS

Document: SPS-100007-002 Rev 5 02/11

Specification Subject to Change