Ditek DTK-120-240SA Specsheet
Every precaution has been taken to ensure that this literature is accurate and complete. DITEK Corporation assumes no responsibility and disclaims all liability for damages resulting from the use of this information or for any errors or omissions.
One DITEK Center 1720 Starkey Road - Largo, FL 33771
Phone: 1-800-753-2345 Direct: 727-812-5000
Technical Support: 1-888-472-6100
www.diteksurgeprotection.com
Doc. Number: SPS-100024-004 Rev 7 03/17
©2017 DITEK Corp.
Page 1 of 1
Technical Specifications
Service Voltage:
120/240 VAC
MCOV:
150/300V
Protection Modes:
L-G, L-L
Voltage Protection Rating:
600V L-G
1,000V L-L
Surge Current Rating:
100,000 Amps (per phase)
50,000 Amps (per mode)
SCCR:
100,000 Amps
Nominal Discharge Current
Rating (In):
20kA
Operation Frequency:
50/60 Hz
Mechanical Characteristics
Connection Method:
½” NPT conduit, water tight
fittings
Housing:
NEMA 4X
Operating Temperature:
-40°F - 185°F (-40°C - 85°C)
Maximum Humidity:
95% non-condensing
Dimensions:
4.7“L x 2.4“W x 4.7“H
(119mm x 61mm x 119mm)
Weight:
1.45 lb (657g)
Quality, Standards & Approval
Agency Approvals:
UL 1449, cUL
SPD Type:
Type 1 SPD (US)
Type 2 SPD (CAN)
IEEE Category C
Warranty:
Ten Year Limited Warranty
DITEK’s DTK-120/240SA Residential, Commercial and
Light Industrial Surge Protective Device is a powerful first
line of defense against voltage surges. Its 100,000
Amp/Phase surge current rating provides strong protection
at such outdoor locations as the utility meter, main
disconnect or household service panel. It can be used for
indoor or outdoor applications.
Product Features
Weatherproof enclosure
Parallel connection
Surface or flush mount capability
Diagnostic LED provides positive indication of
power, ground presence, and surge protection
Automatically resets to handle multiple surge
events
Applications
Residential Meter Can
Main Electrical Disconnect
Standards Compliance:
Loading...