Ditek DTK-120-240CM+ Specsheet

DITEK’s 120/240CM+ is a durable, cost-effective SPD suitable for use in a variety of locations. It is typically used to protect pumps, motors, HVAC condensers, and incoming utility power. Backed by a ten year warranty, the DTK-120/240CM+ is an excellent choice for effective, economical protection.

Also available in a 12-Up Contractor’s Bulk Pack. Specify DTK-120/240CM+B

DTK-120/240CM+

Product Features

• Weatherproof enclosure

• Parallel connection for easy installation

• Diagnostic LED provides positive indication of power, ground presence, and surge protection

• Automatically resets to handle multiple surge events

• Typical Applications: A/C disconnect, small electrical panels, pool/well pumps

• Ten year limited warranty

DTK-120/240CM+

120/240VAC Sur ge Prote c tiv e De vi ce

General Product Specifications

Specifications

Agency Approvals: UL 1449, 3rd Edition, cUL Protector Type: SPD Type 2 Protection Modes: L-G, L-L Response Time: <1ns Temperature Range: -40°F – 185°F (-40°C – 85°C) Maximum Humidity: 95% non-condensing Operating Frequency: 0Hz – 400Hz Dimensions: 2.93” x 2.83” x 1.68”

(74.4mm x 71.9mm x 42.7mm)

Connection: ¾” threaded fitting Weight: .5lb. (227g) Housing: ABS

DTK-

120/240CM+

One DITEK Center 1720 Starkey Road Largo, FL 33771

Service

Wiring

Split Φ

(2W + G ),

120/240VAC

Peak Surge

Current

72,000A/Phase

36,000A/Mode

1-800-753-2345 Direct: 727-812-5000

Technical Support: 1-888-472-6100

www.ditekcorp.com

MCOV

130/260V

UL 1449,

Ed.

V.P.R.

500V L-G,

900V L-L

Short

Circuit

Current

UL1449, 3

Rating

Ed. I

Rating

10,000A 10,000A

Document: SPS-100024-001 Rev 10 12/13

Specification Subject to Change