Ditek D200M-120-2083Y, D200M-120-2083YT, D200M-120-2401, D200M-120-2401T, D200M-2403D Specsheet
...
Every precaution has been taken to ensure that this literature is accurate and complete. DITEK Corporation assumes no responsibility and disclaims all liability for damages resulting from the use of this information or for any errors or omissions.
One DITEK Center 1720 Starkey Road - Largo, FL 33771
Phone: 1-800-753-2345 Direct: 727-812-5000
Technical Support: 1-888-472-6100
www.diteksurgeprotection.com
Doc. Number: SPS-100074-001 Rev 10 06/17
©2017 DITEK Corp.
Page 1 of 2
Technical Specifications
Service Voltage:
Single, split & three phase configurations.
See chart
Surge Current Rating:
200,000 Amps per phase,
100,000 Amps per mode
SCCR:
100,000A
Operating Frequency:
40Hz – 400Hz
Mechanical Characteristics
Connection Method:
¾” NPT conduit, watertight fittings
Housing:
NEMA 4X
Operating
Temperature:
-40°F - 140°F (-40°C - 60°C)
Maximum Humidity:
95% non-condensing
Dimensions:
6.3”Lx 2.4”W x 6.3”H
(160mm x 61mm x 160mm)
Weight:
2.9 lb. (1.3kg)
Quality, Standards & Approval
Agency Approvals:
UL1449 Listed, cUL
SPD Type:
SPD Type 1 (US), SPD Type 2 (Canada)
Standards
Compliance:
ANSI/IEEE C62.41 and C62.45
Category B and C3
Warranty:
Ten Year Limited Warranty
DITEK’s D200 Industrial Surge Protectors are
designed to provide protection to AC power systems in the
most demanding environments. The D200 Series
incorporates individually fused components for maximum
performance and protection. Available in a wide range of
voltage configurations, the compact D200 is an excellent
choice for electrical panel protection.
Product Features
200,000 Amps/phase surge current rating
ensures long service life
Compact size enables close mounting to the
protected panel, to minimize wire length and
maximize performance
Diagnostic LED indicates system power, SPD
function, alarm and ground status
Dry Contacts for remote monitoring
Available in 7 voltage configurations
Applications
Service Entrance
Branch Panel
Accessories
Flush Mount Kit: D200-FMK
Page 2 of 2
Part Number
Service
Voltage
Service
Configuration
MCOV
UL In
Rating
Voltage Protection Rating (VPR)
L-G
L-L
L-N
N-G
D200-120/2401
120VAC
Split Ø
(3W + G)
150V/300V
20kA
600V
1000V
600V
900V
D200-120/2083Y
120/208VAC
127/220VAC
Three Ø
Wye
(4W + G)
150V/300V
20kA
600V
1000V
600V
900V
D200-120/240HL
120/240VAC
Three Ø
High Leg
Delta
(4W + G)
150V/320V
20kA
600V
HL-G
1200V
1000V
HL-L
1500V
600V/
HL-N
1000V
900V
D200-277/4803Y
277/480VAC
220/380VAC
230/400VAC
240/415VAC
Three Ø
Wye
(4W + G)
320V/640V
20kA
1200V
1800V
1000V
1800V
D200-347/6003Y
347/600VAC
Three Ø
Wye
(4W + G)
420V/840V
20Ka
1500V
2500V
1500V
2500V
D200-2403D
240VAC
Three Ø
Delta
(3W + G)
320V/640V
20kA
1200V
1800V
N/A
N/A
D200-4803D
480VAC
Three Ø
Delta
(3W + G)
550V/1100V
20kA
1800V
3000V
N/A
N/A
Threaded Conduit Fitting ¾” NPT
Outdoor Rated Conduit and Nipple
Flush Mount
Plate Option
Loading...