Ditek D200-120-2083Y, D200-120-2401, D200-120-240HL, D200-2403D, D200-277-4803Y Specsheet

...

200kA/Φ, 100kA/Mode Surge Protective Device

Industrial Surge Protection

DITEK’s D200 industrial surge protectors are designed to provide protection to AC power systems in the most demanding environments. The D200 incorporates individually fused components for maximum performance and protection. Available in a wide range of voltage configurations, the D200 is an excellent choice for electrical panel protection.

D200 Series

General Product Specifications

D200 Product Features

• Suitable for use on branch panels and small

disconnects

• Compact size enables close mounting to the protected panel to minimize wire length and maximize performance

• 200,000 Amp peak surge current capacity ensures long service life

• Available in 8 voltage configurations

• Diagnostic LED’s indicates system power, SPD function, alarm and ground status

• Dry Contacts

• Audible Alarm- With test and disable features.

• Complies with ANSI/IEEE C62.41 and C62.45 Category B and C3 standards

• Ten year limited warranty

Specifications

Agency Approvals: UL 1449, 3 IEEE Location Category: Category B and C3 Protector Type: SPD Type 1 (US), Type 2 (Canada) Peak Surge Current: 200kA/Phase, 100kA/Mode Short Circuit Current Rating: 100,000A Protection Modes: See Chart Temperature Range: -40° – 140°F (-40° – 60°C) Maximum Humidity: 95% non-condensing Operating Frequency: 40Hz – 400Hz Housing: NEMA 4X Dimensions: 6.3”H x 6.3”W x 2.4”D

(160mm x 160mm x 61mm)

Connection: ¾” NPT conduit, watertight fittings Weight: 2.9lb. (1.3kg) Options: Flush Mount Kit, D200-FMK Dimensions: 9.0” x 9.0” Plate (227mm x 227mm)

Edition, cUL

One DITEK Center 1720 Starkey Road Largo, FL 33771

1-800-753-2345 Direct 1-727-812-5000

Technical Support: 1-888-472-6100

www.ditekcorp.com

Document: SPS-100074-001 Rev 3 11-11

Specification Subject to Change

D200 Series

200kA/Φ, 100kA/Mode Surge Protective Device

General Product Specifications

Industrial Surge Protection

D200 Surge Protection

Dimensions: Option Codes: Ordering Example:

6.3”H x 6.3”W x 2.4”D Flush Mount Kit: D200-120/2083Y: D200 for 200kA, (160mm x 160mm x 61mm) D200-FMK 3 Wye for 4W+G, 120/208V system

Outdoor Rated Conduit and Nipple

Conduit fitting: 3/4” threaded NPT

Flush Mount Plate Option

Technical Specifications

D200 Series

D200-120/2401

Service

Wiring

120/240VAC

Split Φ

MCOV

150V/300V

UL 3

Ed. I

Rating

20kA

UL 1449, 3rdEdition Voltage Protection Rating

600V

L-G

600V

(VPR)

N-G

900V

L-LL-N

1000V

D200-120/2083Y D200-127/2203Y

D200-120/240HL

D200-277/4803Y D200-220/3803Y D200-230/4003Y D200-240/4153Y

D200-347/6003Y

One DITEK Center 1720 Starkey Road Largo, FL 33771

120/208VAC Three Φ

Wye

120/240VAC Three Φ

High Leg Delta

277/480VAC Three Φ

Wye

600VAC Three Φ DeltaD200-6003D

150V/300V

150V/320V

320V/640V

320V

840V

1-800-753-2345 Direct 1-727-812-5000

Technical Support: 1-888-472-6100

www.ditekcorp.com

20kA

600V

600V/

HL 1000V

1000V

N/A

600V

HL-G 1200V

1200V

3000V

Document: SPS-100074-001 Rev 3 11-11

900V

1800V

N/A

Specification Subject to Change

1000V

HL-L 1500V

1800V

2500V2500V1500V1500V20kA 420/840V347/600VAC Three Φ

1800VN/A1200VN/A20kA240VAC Three Φ DeltaD200-2403D

3000VN/A1800VN/A20kA550V480VAC Three Φ DeltaD200-4803D

6000V