Ditek D100-120-2083Y, D100-120-2401, D100-120-240HL, D100-2403D, D100-277-4803Y Specsheet

...

100kA/Φ, 50kA/Mode Surge Protective Device

Industrial Surge Protection

DITEK’s D100 industrial surge protectors are designed to provide protection to AC power systems in the most demanding environments. The D100 incorporates individually fused components for maximum performance and protection. Available in a wide range of voltage configurations, the compact D100 is an excellent choice for electrical panel protection.

D100 Series

General Product Specifications

D100

Product Features

• Suitable for use on distribution and branch

panels

• Compact size enables close mounting to the protected panel to minimize wire length and maximize performance

• 100,000 Amp peak surge current capacity ensures long service life

• Available in 7 voltage configurations

• Diagnostic LED indicates system power and SPD function

• Complies with ANSI/IEEE C62.41 and C62.45 Category B and C3 standards

•Ten year limited warranty

Specifications

Agency Approvals: UL 1449, 3 IEEE Location Category: Category B and C3 Protector Type: SPD Type 1 (US), Type 2 (Canada) Peak Surge Current: 100kA/Phase, 50kA/Mode Short Circuit Current Rating: 100,000A Protection Modes: All Modes – L-G, L-N, L-L, N-G

(Single Phase and Wye); L-G, L-L (Delta)

Temperature Range: -40° – 140°F (-40° – 60°C) Maximum Humidity: 95% non-condensing Operating Frequency: 40Hz – 400Hz Housing: NEMA 4X Dimensions: 4.7”H x 4.7”W x 2.4”D

(119mm x 119mm x 61mm)

Connection: ½” NPT conduit, watertight fittings Weight: 2lb. (.9kg) Options: Flush Mount Kit, D100-FMK Dimensions: 6.5” x 6.5” Plate (165mm X 165mm)

Edition, cUL

One DITEK Center 1720 Starkey Road Largo, FL 33771

1-800-753-2345 Direct 1-727-812-5000

Technical Support: 1-888-472-6100

www.ditekcorp.com

Document: SPS-100050-001 Rev 5 09-11

Specification Subject to Change

D100 Series

100kA/Φ, 50kA/Mode Surge Protective Device

General Product Specifications

Industrial Surge Protection

D100 Surge Protection

Dimensions: Option Codes: Ordering Example:

4.7”H x 4.7”W x 2.4”D Flush Mount Kit: D100-120/2083Y: D100 for 100kA, (119mm x 119mm x 61mm) D100-FMK 3 Wye for 4W+G, 120/208V system

Outdoor Rated Conduit and Nipple

Conduit fitting: ½” threaded NPT

Flush Mount Plate Option

Technical Specifications

D100 Series

Service

Wiring

MCOV

UL 3

Ed. I

Rating

UL 1449, 3rdEdition Voltage Protection

Rating (VPR)

L-G

N-G

L-LL-N

D100-120/2401

D100-120/2083Y

D100-120/240HL

D100-277/4803Y

D100-2403D

D100-4803D

D100-6003D

One DITEK Center 1720 Starkey Road Largo, FL 33771

120/240VAC

Split Φ

120/208VAC Three Φ

Wye

120/240VAC Three Φ

High Leg Delta

277/480VAC Three Φ

Wye

Delta

480VAC Three Φ

Delta

600VAC Three Φ

Delta

150V/300V

320V/640V

480V/960V

840V/1680V

1-800-753-2345 Direct 1-727-812-5000

Technical Support: 1-888-472-6100

www.ditekcorp.com

20kA

10kA

600V

600V/

HL 1000V

1000V

N/A

600V

600V/

HL 1200V

1200V

1800V

2500V

-Document: SPS-100050-001 Rev 5 09-11

900V

1800V

N/A

Specification Subject to Change

1000V

1000V/

HL 1800V

1800V

1800VN/A1200VN/A20kA2400VAC Three Φ

4000V

5000V