Ditek 100-640 Specsheet

Every precaution has been taken to ensure that this literature is accurate and complete. DITEK Corporation assumes no responsibility and disclaims all liability for damages resulting from the use of this information or for any errors or omissions.

One DITEK Center 1720 Starkey Road - Largo, FL 33771 Phone: 1-800-753-2345 Direct: 727-812-5000 Technical Support: 1-888-472-6100

www.diteksurgeprotection.com

Mechanical Characteristics

Housing:

Aluminum

Dimensions:

2.1“L x 0.5“W x 0.4“H

(53.34mm x 12.7mm x 10.16mm)

Weight:

1.0 oz. (28g)

DITEK’s 100-640 Grounding Bar Kit is a 5-position

grounding buss used for making good mechanical and electrical connections when terminating multiple grounding conductors. This method is preferred over using a wire nut to bond multiple grounding conductors together. We recommend that the ground from the DITEK surge suppressor be terminated to an open position on the ground bus. Then, using a larger gauge grounding conductor, bond the ground buss to an appropriate ground. NEC requires a ground to be 25 Ohms or less impedance. IEEE recommends 5 Ohms or less for optimum ground performance.

Product Features

 5 positions  Small footprint, easy to install  Provides a secure mechanical connection,

eliminating the need for wire nuts

Applications

 Grounds multiple conductors to one grounding

point

5-Position Grounding Buss in Use