Displays2go MNTW803S Installation Manual
Item No.:MNTW803SItem No.:MNTW803S
TV Size Range: 14 24
Maximum Weight Capacity: 15kg/33lbs
Adjustable angle: 5 15
Integrated Cable management
"～ "
-～°°
This product wasdesigned to beinstalled on woodstud walls andsolid concrete walls.
Before installing make sure the supporting surfacewill support thecombined load ofthe
equipment andhardware. Never exceed the Maximum LoadCapacity. This product is
intended forindoor use only. Use of this product outdoorscould lead toproduct failure or
personal injury.
CAUTION
INSTALLATION GUIDE
-8-
This product containssmall items thatcould be achoking hazard if swallowed. Keep
these itemsaway from young children
1.Make sure these instructions areread and completely understood before attempting
installation. Ifyou are unsure of any partof this installation,contact a professional
installer forassistance.
2.The wallor mounting surfacemust be capableof supporting thecombined weight of
the mountand the display; otherwise the structure must be reinforced
3.Safety gearand proper tools must be used. A minimumof two peopleare required
for thisinstallation. Failure to use safety gear can result inproperty damage, serious
injury or death.
!
.
Warning
Thank you for choosing our productThank you for choosing our product
-7-
-2-
WallPlate
TV Plate
Qty
Description
A
B
C
D
E
4
4
4
2
2
M4x12mm bolt
M5x12mm bolt
M5 Washer
ID
Long bolt
Concrete anchor
Hardware Kit:Hardware Kit:
A-B
D
E
C
F
F
1
Allen wrench
180°
- 5 ~15°°
Cable management clip
Cable routing access points
Tension screw
Part 3-Adjusting display and using cord management
Route cords along articulating arms using cord management .
Articulating arms can be adjusted to position display into desired location.
Use allen wrench (F) to tighten and loosen the tension screw. Do not
overtighten and do not loosen to the point the screws come out.
clip
Part 3-Adjusting display and using cord management
Wrench(F)
Plastic cover
Loading...