En glish
Installation Instruction
UNPACKING INSTRUCTIONS
! Careful ly o pen the carton, remo ve contents and lay out on car dboar d or other
protective s urface to avoid damage.
! Che ck package co ntents a gainst the Supplied P arts Lis t in the next pa ge to as sure
that all component s were received un damaged. Do not use damag ed or defective
parts.
! Carefully re ad all in structions befo re attempting installa tion.
IMPORTANT SAFETY INFORMATION
! Install and operate this devi ce w ith c are. Please r ead this instructi on b efore
installati on, and carefully follow all instruc tions contained herein . Use proper safety
equipment du ring in stallation.
! Please call a qual ified install ation contractor for he lp if you don't underst and t hese
directions o r have an y doubts about the sa fety of the install ation .
Do not use this produc t for any p urpos e or in any configuration not expli citly specified
in t his ins truction. We here by disc laims a ny and all liability for in jury or d amage a risin g
from incorre ct assembly, incorrect mount ing, or i ncorrect use of thi s product.
1
Su pp li ed Par ts List
(1)L Plate -e
(8)M6x12 Bol t-i (4)M6x12 Bol t-j
(4)M6 Wash er-m (4)M6 Nut-n
(1) C-clamp- f (1) C-clamp Br ace-g (2)M10x15 Bo lt-h
(1)Gas Sprin g Arm-c
(2)M6x35 Bol t-k
(2)Square Pa d-o
5mm thicknes s
(1)Wrist Pad-d(1) Platform -a (1) Keyboard Tr ay-b
(2)Spacer- l
(2)Square Pa d-p
2mm thicknes s
(1)Allen Key -q
(1)Wrench-r
2
St ep 1
Connecting L Plate to Keyboard Tray
b
e
i
War ning:
Ensure s cre ws are
secure d fir mly.
St ep 2
!
q
Attaching Square Pads to the Back of Keyboard Tray
o
3
St ep 3
Connecting L Plate to Gas Spring Arm
“L” plat e can b e installed in t wo po sitions .
1. Ins tal l in a high position for fit ting the key board
r
m
tray to th e sur face of deskto p directly.
2. I nstall in a l ow po sit ion f or fittin g the k eyb oard tray
below th e sur face of deskto p.
n
c
Le ve r
War ning:
Ensure s cre ws are
secure d fir mly.
St ep 4
War ning:
Ensure s cre ws are
secure d fir mly.
!
War ning:
Don’t op era te the lever unt il th e
workst ati on is fully asse mbled.
!
Connecting Gas Spr ing Arm to Monitor Platfor m
j
!
a
4
St ep 5
Attaching Lever to the Back of Monitor Platfor m
k
l
War ning:
Ensure s cre ws are
secure d fir mly.
St ep 6
War ning:
Ensure s cre ws are
secure d fir mly.
!
Note: Th e lever can be installed
eigher on t he righ t or the left
side of monito r platform.
Connecting the C-clamp Brace to Gas Spring Arm
g
i
p
!
5
St ep 7
Attaching the C-clamp to the Edge of Desktop
h
q
f
St ep 8
Attaching Wrist Pad to Keyboard Tray
d
6
St ep 9
Operating the Lever to Lift or Lower the WorkStation
St ep 1 0
• If t he weight of the monitor(s) makes i t difficul t to lift t he work station, adjust the screw
at the back of the g as spring arm counterclo ckwise.
• If the works tation lowers too quickly, adjust the s crew at the back of gas spring arm
counterclo ckwis e.
• If th e worksta tion doesn’t ea sily lowe r down, ad just the screw at the back of gas
spring arm clo ckwis e.
Adjusting the Tension of Workstation
7
Loading...