DISPLAYLITE OLS-3250MD, OLS-4650MD User Manual

Mirror Touch Display

User Manual Version 1.0

OLS-3250MD / OLS-4650MD

Please read and comply with all safety information in this manual before using the product

05.16.2017

www.displaylite.com
[phone]

[e-mail]

The colour and appearance may differ depending on the product.

Specifications are subject to change without prior notice to improve performance.

Copyright © 2017 Displaylite Ltd

All rights reserved. No part of this publication maybe reproduced,

Distributed or transmitted in any form without written permission.

- 33 -

Features

▶

Supports Resolutions up to 1920x1080

▶

Digital Character Smoothing

▶

Automatic Set-up

▶

Stereo Speakers 2 x 8W Stereo Speakers

▶

Plug & Play VESA DDC2B Compliant

Windows 7/8/10 Compliant

▶

Power Management (VESA DPMS Compliant)

▶

VESA Mounting Standard (400mm∼200mm)

▶

IPX1 Standard Compliant (Only front face)

Thank you for purchasing our product.

The Displaylite Reflect Mirror Touch Display is intended for general use such as in meeting rooms,
visitor centres, museums and retail environments.

Service:

Solutions can be found under Trouble Shooting, Section 11 on page 28. Please contact your
supplier in the first instance. Further support can be obtained from Displaylite Ltd. Please provide your
product model, serial number and an explanation of the issue.

Contact:

Displaylite Ltd, Huntingdon Business Centre, 16 Blackstone Road, Huntingdon, Cambridgeshire,

PE29 6EF, United Kingdom.
Tel: [phone], Email: [e-mail] Online: www.displaylite.com

If you fail to comply with the regulations for safety and proper use, fire or injury may be caused.
Static images over an extended period may cause image ghosting, not covere d under warranty.

To prevent electric shock, Do-not remove cover.
No user serviceable parts inside.
Refer servicing to qualified service personal.

Supplied Accessories

The following accessories are included in your package. Check to see if they
are enclosed with the monitor. If anything is missing or damaged, please contact
your local Displaylite Dealer or Displaylite directly.

Displaylite Reflect 32 / 46

■

Displaylite Reflect46

Power Cable

USB Cable(Touch)

IR Receiver

CR2025

Battery(CR2025)

POWER

MUTE

MEMU

AUTO

OK

PLAY

EXIT

VOL

STOP

SELECT

Remote Controller

USB Cable(Camera)

VGA Cable

DVI Cable

Displaylite Reflect 32 / 46

14. Dimension

■

Displaylite Reflect32

Class A digital device

Notice to users

This device is designed for industrial or commercial purposes with a safety certificate for
electromagnetic interference, it is not intended to be used in the home.

Important Safety Instructions

1)

Read these instructions carefully.

2)

Keep documents for future reference.

3)

Study all warnings.

4)

Follow all instructions.

5)

Do not use this apparatus near water.

6)

Clean only with a dry cloth.

7)

Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.

8)

Do not install near any heat sources such as radiators, gas or electric fires,
ovens, or other apparatus (including amplifiers) that produce heat.

9)

Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third
prong are provided for your safety. If the provided plug does not fit into your
socket, consult an electrician for replacement of the obsolete socket.

10)

Protect the power cable/lead and power socket from getting walked on,
pinched or damaged in anyway.

11)

Only use attachments/accessories specified by the manufacturer.

12)

Use only with a trolley, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus.
When a trolley is used, use caution when moving the
trolley/apparatus combination to avoid injury.

13)

Unplug this apparatus during lightning storms or when unused for long periods of
time.

14)

Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug
damage, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.

- 32 -

- 1 -

- 2 -

- 31 -

13. Compliant Timing

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock.

This symbol is intended to alert the user to the presence of important
operating and maintenance(servicing) instructions in the literature

*2

accompanying the appliance.

*2

*1

*1

*1

*1

*1

*1

*1

*1

*1

*1

*1. DVI/HDMI input only.

NOTE

*2. HDMI input only.

NOTICE

1.

To disconnect the apparatus from the mains, the plug must be pulled out from the mains
socket, therefore the mains plug shall be readily available.

2.

WARNING - To Reduce the risk of fire or electric shock, do not expose this
appliance to rain or moisture.

3.

Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids,
such as vases, must not be placed on the apparatus.

4.

Use only a properly grounded plug and socket.

5.

CAUTION – These servicing instructions are for use by qualified service personnel only. To
reduce the risk of electric shock, do not perform any servicing other than that contained in
the operating instructions unless you are qualified to do so.

Horizontal

Vertical

Video Mode

Frequency

Frequency

Dot Clock

VESA

VGA

640 x 480

31.469kHz

59.940Hz

25.175MHz

720 x 400

31.467kHz

70.080Hz

28.320MHz

SVGA

800 x 600

37.879kHz

60.317Hz

40.000MHz

XGA

1024 x 768

48.363kHz

60.004Hz

65.000MHz

1280 x 720

44.720kHz

60.000Hz

74.500MHz

1280 x 768

47.776kHz

59.870Hz

79.500MHz

SXGA

1280 x 1024

63.981kHz

60.020Hz

108.000MHz

1366 x 768

47.712kHz

59.790Hz

85.500MHz

WSXGA+

1680 x 1050

65.290kHz

59.954Hz

146.250MHz

Full HD

1920 x 1080

67.500kHz

60.000Hz

148.500MHz

SD

480i

60Hz

15.735kHz

59.940Hz

13.500MHz

576i

50Hz

15.625kHz

50.000Hz

13.500MHz

480p

60Hz

31.469kHz

59.940Hz

27.000MHz

576p

50Hz

31.250kHz

50.000Hz

27.000MHz

HD

720p

50Hz

37.500kHz

50.000Hz

74.250MHz

720p

60Hz

45.000kHz

60.000Hz

74.250MHz

1080i

50Hz

28.125kHz

50.000Hz

74.250MHz

1080i

60Hz

33.750kHz

60.000Hz

74.250MHz

1080p

24Hz

27.000kHz

24.000Hz

74.250MHz

1080p

30Hz

33.750kHz

30.000Hz

74.250MHz

1080p

50Hz

56.250kHz

50.000Hz

148.500MHz

1080p

60Hz

67.500kHz

60.000Hz

148.500MHz

- 30 -

- 3 -

Displaylite Reflect 32 / 46

■

Displaylite Reflect46

Specifications are subject to change without notice to improve quality.

Contents

※

European Union Disposal Information

....................................................................................

4

※ Recommendations for Installation

....................................................................................5

※ Special Notes on LCD Monitors

..........................................................................................6

※ Customer Service

................................................................................................................6

※ Cleaning

.............................................................................................................................. 7

※

Ergonomic Recommendations

................................................................................................

7

1.

Safety Precautions

................................................................................................................8

2.

Unpacking

........................................................................................................................... 10

3.

Installation

........................................................................................................................... 11

3.1.

WALL MOUNTING

.....................................................................................................................................................

11

3.2.

FAN ............................................................................................................................................................ 11

3.3.

ROTATING THE DISPLAY

.........................................................................................................................................

11

4.

Product Features

............................................................................................................... 12

5.

Remote Control

.................................................................................................................. 14

5.1.

PREPARING THE REMOTE CONTROL

............................................................................................................................. 15

5.2.

BASIC OPERATION

..................................................................................................................................................

16

6.

How to Connect Cables

.............................................................................................................

18

7.

Computer Setting

............................................................................................................... 20

8.

Operating The Monitor

....................................................................................................... 21

9.

Adjustment Menu Contents

............................................................................................... 23

9.1.

Brightness/Contrast

...................................................................................................................................................

23

9.2.

Colour Settings

...........................................................................................................................................................

23

9.3.

Display Settings

..........................................................................................................................................................

24

9.4.

Other Settings

.............................................................................................................................................................

25

9.5.

Input Source

...............................................................................................................................................................

26

9.6.

Information ................................................................................................................................................ 26

10.

Power Management Feature

................................ ................................ .................................

27

11.

Trouble Shooting

............................................................................................................... 28

12.

Specifications

.................................................................................................................................

29

13.

Compliant Timing

.............................................................................................................. 31

14.

Dimension

......................................................................................................................... 32

Product Name

OLS-4650MD

Model Name

Displaylite Reflect46

LCD
Panel

Active Screen Size(in)

46

Back Light Unit Type

TFT LCD Edge LED

Outline Dimension(mm)

1044.08(H) x 598.67(V) x 9.9(D)

Display Area(mm)

1018.08(H) x 572.67(V)

Pixel Pitch(mm)

0.53025(H) x 0.53025(V)

Number of Pixels

1,920 x 1,080

Display Color

10 bit(8bit+FRC), 1073.7M

Luminance, White(cd/m2)

500 (Center 1point, Typ.)

Contrast Ratio(Typ.)

4,000 : 1

Viewing Angle (CR>10)

Viewing angle free (R/L 178 (Min.), U/D 178 (Min.))

Display Mode

Normally Black

Surface Treatment

AG (Haze 11%)

Operating Life Time(Hrs)

50,000 (Min.)

Display Orientation

Portrait

Outline Dimension (mm)

1100.08(H) x 654.67(V) x 89.0(D)

Input Terminal

HDMI, PC, DVI, USB(Touch only), Audio Jack,

USB(Camera) RS-232C

Control Method

RS-232C, Keypad, Remote Controller

Power Supply

AC 100V ~ 240V±10% (50/60Hz)

Input Signal

Support Resolution

1,920 x 1,080

HDCP

Support

Frequency

1) Digital Timing:

H-freq.(15.625~67.5KHz) & V-freq.(24~60Hz)

2) Analog Timing:

H-freq.(31.467~67.5KHz) & V-freq.(59.79~70.08Hz)

Power
Consumption

Max.(W)

95

Typ.(W)

90

Stand-By. (W)

≤ 0.5

Speaker

2x8W(8Ω) THD+N<10%@1kHz(Max.)

Frequency Response : 100Hz ~ 15KHz@±3dB

P-CAP Touch Function

Support(Finger 12 Point) / Pen(Palm rejection function)

VESA Mounting(mm)

400 x 200

Orientation

Portrait

Weights (Kg)

34 (Typ.)

Displaylite Reflect 32 / 46

※

European Union Disposal Information

12. Specifications

■

Displaylite Reflect32

English

Disposal of old Electrical & Electronic Equipment (Applicable
throughout the European Union and other European countries
with separate collection programs)

This symbol found on your product or on its packaging, indicates that this
productshouldnotbe treatedashouseholdwastewhenyouwish to dispose of
it.Instead,itshould behanded over to anapplicable collectionpointfor the
recyclingofelectricalandelectronicequipment.Byensuring thisproductis
disposed of correctly, you will help prevent potential negative consequences to
the environmentand human health,whichcouldotherwisebe causedby
inappropriatedisposalofthisproduct.Therecyclingofmaterialswillhelp to
conserve natural resources.

Français

Mise au rebut des équipements électriques et électroniques
usagés (Valable dans l’ensemble de l’Union Européenne ainsi que
danslespay seuropéensdis posantdeprogramm esdistinctsde
collecte des déchets)

Ce symbole appliqué sur votre produit ou sur son emballage indique que ce produit ne
doit pas être traité comme un déchet ménager lorsque vous voulez le mettre au rebut.
Il doitaucontraire être remis àunsitedecollecte agréépourlerecyclage des
équipements électriques et électroniques. En veillant à ce que ce produit soit mis au
rebut de façon adéquate, vous contribuerez à prévenir les conséquences
potentiellement négatives sur l’environnemen t et surla santéhumainequi risqueraient de
se produire en cas de mise au rebut inappropriée de ce produit. Le recyclage des
matériauxcontribueraégalementàéconomiserlesressourcesnaturelles.

Deutsch

Entsorgung von elektrischen & elektronischen Alt geräten (geltend
fü rdieeu ropäische Gemeinschaftu ndandereeuropäische
Länder mit separaten Sammelprog rammen)

Dieses Symbol, zu findenauf Ihrem Produktoder dessen Verpackung,
machtSiedaraufaufmerksam,dassdiesesProduktbeider Entsorgung
nichtals Hausmüllbehandeltwerdendarf. Stattdessensollte esan eine
SammelstellezumRecyclingvonelektrischenundelektronischen Altgeräten
gegebenwerden. Helfen Siemit, potenziell schädliche Einflüsse
auf Umwelt und Gesundheit, die durch eine unsachgemäße Entsorgung
dieses Produktes entstehen können, zu vermeiden und entsorgen Sie
dieses Produkt ordnungsgemäß. Recycling hilft, natürliche Rohstoffe
einzusparen.

This symbol is only valid in the European Union.

If youwishtodiscardthisproduct, pleasecontact your
local authorities or dealer and ask for the correct method
ofdisposal.

Cesymbolen’estvalable que dansl’Union Européenne.
Sivoussouhaitezmettre ceproduit aurebut,veuillez
prendre contact avec lesautorités locales ou avec votre
revendeur et renseignez-vous sur la mé thode de mise au
rebutcorrecte.

DiesesSymbolistnur innerhalb dereuropäischen
Gemeinschaft gültig.
Wenn Sie dieses Produkt entsorgen möchten, wenden
Sie sich bitte an Ihre örtliche Behörde und fragen Sie
nach der ordnungsgemäßen Entsorgungsmethode.

Español

Italiano Nederlands

Deshecho de equipos eléctricos y electrónicos (aplicable a la

Smaltimento delle attrezzature elettriche ed elettroniche usate Verwijderen van oude elektrische en elektronische apparatuur Unió n

Europea y a otros países europeos con programas de (applicabile in tutta la Comunità Europea ed altri Paesi Euro pei

(toepasselijk in de volledige Europese Unie en andere Europese

reciclaje independientes) che applicano programmi di raccolta differenziata) landen met afzonderlijke programma’s voor afvalverzameling)

La presencia de este símbolo en el propio producto o en su material
embalaje, indica que no se debe tratar como residuo doméstico
desee deshacerse de él. En su lugar, debe entregarlo en el punto
correspondiente de reciclaje de equipos elé ctricos y electrónicos.
Asegurándose de que es te producto se desecha de forma correcta, ayudará
a evitar posibles consecuencias negativas parala conservacióndel
medioambiente y la salud humana, consecuencias que podrían darse si se

Il simbolo trovato sul prodotto, o sulla sua confezione, indica che il prodotto
non può essere trattato come i domestici quando è il momento di smaltirlo.
Al contrario, deve essere consegnato ad un centro di raccolta specializzato
nel riciclaggio di attrezzatureelettricheed elettroniche. Assicurando cheil
corretto smaltimento di questo prodotto, si aiuterà a prevenire potenziali
conseguenze negativesull’ambiente e sulla salute umana, chepossono
essere provocate da uno scorretto smaltimento di questa attrezzatura. I

Dit symbool dat op het product of zijn verpakking is aangebracht, geeft aan de
dat dit product niet mag worden behandeld als huishoudelijk afval als u het cuando
wilt wegwerpen. U moet het afgeven bij een specifiek verzamelpunt voor de limpio
recyclagevanelektrischeenelektronischeapparatuur. Doortegaranderen
datuditproductopde correctemanierwegwerpt,helptupotentiële
negatieve gevolgen voor hetmilieu en de menselijke gezondheid, die zouden

kunnen worden veroorzaakt door een onrechtmatig wegwerpen van het deshace del
producto de f orma inadecuada. El reciclado de materiales ayuda materiali riciclati aiuteranno a conservare le risorse naturali.
a conservarlosrecursosnaturales.

product, te voorkomen. De recyclage van materialen helpt het behoud van

natuurlijke bronnen.

Estesímbolosolamenteesválido en la Unión Europea.
Si desea deshacerse de este producto, póngase en
contactoconlasautoridadeslocalesoconsu
distribuidor y pida información sobre el método de
disposición adecuado.

Questosimboloèvalidosolonell’Unione Europea.

Per smaltire que sto prodotto, mettersi in contatto con
le autoritàlocali – ocon il rivenditore – e chiedere
informazioni sulcorrettometodo di smaltimento.

Dit symbool is alleengeldig in de Europese Unie.
Alsuditproductwenst wegtegooien, dientucontact op
tenemenmet uwlokaleinstantiesvoor detailsover de
gepaste methode voor afvalverwijdering.

Português

Eliminação d e equipamentos eléctricos e electró nicos usados
(aplicávelna União Europeiaenoutrospa íseseuropeu scom
programas pró prios de recolha destes equipamentos)

Estesímbolo, colocado no p roduto ou na respectivaembalagem, indica que
oprodutonãodeve ser tratado como lixo doméstico aquando da sua
eliminação. Em vezdisso, deve serentregue num ponto de recolha de
quipamentos eléctricos e electrónicos para posterior reciclagem. Ao garantir a
correcta eliminação deste produto, estará a evitar consequências
potencialmente negativas t anto para o ambiente como para a saúde humana. A
reciclagem de m ateriais ajuda a preservar osrecursos naturais.

Estesímboloapenaséválido na União Europeia.
Se quisereliminar esteproduto, contacteasentidades
locais ou o seu fornecedor para ficar a saber
qual o mé todo de eliminação correcto.

Polski

Usuwanie zużytego sprzętu elektrycznego i elektronicznego

(Dotyczy krajó w Unii E uropejskiej i innych krajów europejskich z
oddzielnymi programami zbió rki odpadów)

Obecnośćtegosymbolu na produkcielub na opakowaniuzproduktem

oznacza, że tegoproduktu niemożna wyrzucaćrazem zodpadkami
domowymi. Należy go przekazać do punktu zbiórki w celupoddania

recyklingowi podzespołówelektrycznychielektronicznych. Usunięcietego
produktu w prawidłowy sposób, pomoże w zabezpieczeniu przed
negatywnym wpływem odpadów na środowisko i zdrowie ludzi,
powodowanym przez niewłaściwe usuwanie produktu. Przetwarzanie
materiałów pomagaw zac howaniu zasobów naturalnych.

Tensymbolobowiązuje wyłącznie wkrajach Unii

Europejskiej.

Informacje dotyczące prawidłowej metody usunięcia

tego produktu, można uzyskać u w ładz lokalnych lub u
dostawcy.

Waste Electrical and Electronic Equipment (WEE E) Directive In
the European Union, this label indicates that this p roduct should
notbedisposedofwithhouseh old waste. Itshouldbedeposited at
an appropriatefa cility to enablerecoveryand recyc ling. EEE

complies with Directive ‘Regulation on the Restric tion of the Use of

Certain Hazardous Sub stances in Electrical and Electro nic

Equipment’

Waste Electrical and Electronic Equipment(WEEE)
Directive In the European Union, this label indicates that
thisproductshouldnot bedisposedof withhousehold
waste. It should be deposited at an appropriate facility to
enablerecoveryandrecycling. EEEcomplieswith
Directive ‘Regulation on the Restrictionof the Useof
Certain Hazardous Substances in Electrical and Electronic

Equipment’

Avfall av fö rbrukad elektrisk och elektroniskutrustning

Svenska

Suomi

Vanhojen sähkö - ja elektroniikkalaitteiden hävittäminen Waste Electrical and Electronic Equipment (WEE E) Yö nergeleri
(Tillämpbart i hela Europeiska unione n och andraeuropeiska
länder med separata samlingspro gram)

Den här symbolen som finns på din product eller på dess förpackning
påvisar att produkten inte ska behandlas som hushållsavfall när du vill
slänga bort den. Istä llet ska den lämnas över till en lämplig uppsamlingspunkt för
återvinning avelektriska och elektroniska utrustningar. Genom att tillförsäkra
att den här produkten återvinns på ett riktigt sätt hjälper du till med att förhindra
möjliga negative konsekvenser för m iljön ochmänsklig hälsa. Det kan annars
orsakas på grund av olämplig sophantering av den här produkten. Återvinningav
material kommer att hjälpatill att bevara naturtillgångar.

Denhär symbolen ärendast giltig inom den
Europeiska unionen.
Om duvill slängabort den härproduktenska du
kontakta lokala myndigheter eller återförsäljar, och
fråga efter lämplig avfallsmetod

(Soveltuva kaikkialla Euroopan unionin alueella, sek ä muissa

Euroopan maissa, joilla on erillisetkerä ysohjelmat)

Jos tuotteessa tai sen pakkauksessa on tämä symboli, sitä ei pidä

hävitettäessä käsitellä tavallisena kotitalousjätteenä, vaan se kuuluu toimittaa

sähkö- ja elektroniikkalaitteiden kierrätyspisteeseen. Varmistamalla, että

tämätuotehävitetää nasiaankuuluvallatavallaautatestämäänmahdollisia

ympäristölle ja ihmisille koituvianegatiivisiaseuraamuksia, joita sen

vääränlainen hävittä minen voi aiheuttaa. Materiaalien kierrättäminen auttaa

säilyttämään luonnonvaroja.

Tämä symboli on voimassa ainoastaan Euroopan
unionin alueella.
Jos haluat hävittää tämän tuotteen, ota yhteyttä
paikallisiin viranomaisiin tai jälleenmyyjään ja tiedustele
asiaankuuluvia hävittämistoimenpiteitä.

Avrupa Birliği'nde bu etiket, ü rü nü n ev elektroniği aletleri atıkları
ile imha edilemeyeceğini gösterir.

Kurtarmakvegeri dönüşü münü sağlamakiçin uygun şa rtlarda
saklanması gerekir. EEE Yönetmeliğine Uygundur VeElektronik
Eşyalarda Bazi Zararli Maddelerin Kullaniminin Si nirlandirilmasina

Dair Yönetmelik.

Waste Electrical and Electronic Equipment (WEEE)

Yönergeleri Avrupa Birliği'nde bu etiket, ürünün ev
elektroniği aletleri atıklarıileimhaedilemeyeceğini
gösterir. Kurtarmak ve geri dönüşümünü sağlamak için
uygunşartlardasaklanmasıgerekir.EEEYönetmeliğine
Uygundur Ve Elektronik Eşyalarda Bazi Zararli Maddelerin

Kullaniminin Sinirlandirilmasina Dair Yönetmelik.

- 4 -

- 29 -

W
ARNING

Product Name

OLS-3250MD

Model Name

Displaylite Reflect32

LCD
Panel

Active Screen(mm)

31.5

Back Light Unit Type

TFT LCD Back Light

Outline Dimension(mm)

719.2(H) x 413.7(V) x 24.8(D)

Display Area(mm)

698.4(H) x 392.85(V)

Pixel Pitch(mm)

0.3637(H) x 0.3637(V)

Number of Pixels

1,920 x 1,080

Display Color

8 bits

Luminance, White(cd/m2)

500 (Center 1point, Typ.)

Contrast Ratio(Typ.)

3,000 : 1

Viewing Angle (CR>10)

Viewing angle free (R/L 178 (Min.), U/D 178 (Min.))

Display Mode

Normally Black

Surface Treatment

Anti-Glare, 3H(Haze=2%)

Operating Life Time(Hrs.)

50,000(Min.)

Display Orientation

Portrait

Outline Dimension (mm)

781.54 (H) x 476.1(V) x 69.1(D)

Input Terminal

HDMI, PC, DVI, USB(Touch only), Audio Jack,

USB(Camera) RS-232C

Control Method

RS-232C, Keypad, Remote Controller

Power Supply

AC 100V ~ 240V±10% (50/60Hz)

Input Signal

Support Resolution

1,920 x 1,080

HDCP

Support

Frequency

1) Digital Timing:

H-freq.(15.625 ~ 67.5kHz) & V-freq.(24~60Hz)

2) Analog Timing:

H-freq.(31.467 ~ 67.5kHz) & V-freq.(59.79 ~

Power
Consumption

Max. (W)

52

Typ. (W)

48

Stand-by (W)

≤ 0.5

Speaker

2x8W(8Ω) THD+N < 10%@1kHz(Max.)

Frequency Response : 100Hz ~ 15kHz@±3dB

P-CAP Touch Function

Support(Finger 12 Point) / Pen(Palm rejection function)

VESA Mounting(mm)

400 x 200

Orientation

Portrait

Weights (Kg)

17.3 (Typ.)

Specifications subject to change without prior notice to improve quality.

- 5 -

- 28 -

Displaylite Reflect 32 / 46

11. Trouble Shooting

If the monitor fails to operate correctly, please follow the steps below for a possible solution.

1.

Perform the adjustments described in OPERATING THE MONITOR Page 21, depending on the
problem you have. If the monitor does not get a picture, skip to step 2.

2.

Consult the following items if you cannot find an appropriate adjustment item in OPERATING
THE MONITOR or if the problem persists.

3.

If you are experiencing a problem which is not described below or you cannot correct the
problem, discontinue using the monitor and contact your dealer or Displaylite for further
assistance.

※

Recommendations for Installation

Environmental condition for installation

-

As the monitor is very sensitive to physical impact, installation requires considerable
caution.

-

A minimum clearance(10cm) must be provided for good ventilation. (See page 6) When
the minimum clearance is not available additional ventilation must be provided via the
addition of cooling fans or similar.

-

The monitor and other hardware must be connected correctly to a mains earth/ground.

-

Ensure that your installation does not exceed the maximum power rating of your mains
electricity supply equipement.

Recommended Operating Conditions

-

Temperature: 5~35˚C, Humidity: 35~75%, Suitable operating time under 18hours a day.

-

It is recommended to install the equipment with good ventilation.

-

Do not install the equipment in direct sunlight or bright light.

※

Blackening, stains or burning effect on the screen can occur if the installation guidance

has not been followed.

Consideration for easier service

-

When designing the enclosure for the monitor system, consider the ease of service.

-

If access can be gained to the rear of the monitor system, it can greatly reduce time
and effort for service.

-

Regarding higher locations, consider the installation location and exterior design for
easier service.

W

ARNING

Problem Ensure

1

The picture does not appear.

∙ The power cable is firmly seated in the socket.
∙ The power switch is turned ON.
∙ Check the AC socket is live. Please check with another piece of equipment.
∙ If the blank screen saver is in active mode, touch the keyboard or the mouse.
∙ Increase the contrast and/or brightness.
∙ Check the computer is ON.
∙ The signal cable is properly connected.
∙ The signal timing of the computer is within the specification of the monitor.
∙ If the monitor is in power management mode, touch the keyboard or the mouse.

2

The screen is not synchronized.

∙ The signal cable is properly connected.
∙ The signal timing of the computer is within the specification of the monitor.
∙ The video output level of the computer is within the specification of the monitor.

3

The screen position is not in the center.

∙ The signal timing of the computer is within the specification of the monitor.

4

The screen is too bright or too dark.

∙ The video output level of the computer is within the specification of the monitor.

5

The screen is shaking.

∙ The power voltage is within the specification of the monitor.
∙ The signal timing of the computer is within the specification of the monitor.

6

No sound.

∙ The audio equipment (computer etc.) is ON.
∙ The audio cable is properly connected.
∙ The volume is turned up.
∙ The mute is OFF.
∙ The audio output level of the audio equipment is within the specification of the monitor.

7

The sound is too loud or too quiet.

∙ The audio output level of the audio equipment is within the specification of the monitor.

8

A strange noise is heard.

∙ The audio cable is properly connected.

9

The touch screen shows no response.

∙ The USB cable is firmly seated in the socket.
∙ Touch screen driver software is installed.

10

The touch position does not deviate.

∙ The calibration function is set up correctly.

- 27 -

- 6 -

Displaylite Reflect 32 / 46

※

Special Notes On LCD Monitors

Power Management Feature

The following symptoms are normal with LCD monitors and do
not indicate a problem.

■ When you first turn on the LCD monitor the picture may not be displayed correctly.
To correct this please make adjustments to the monitors picture settings.

■ You may find slightly uneven brightness across the screen depending on the
desktop image being displayed.

■ Due to the nature of the LCD screen, a ghost image of the previous screen may
remain after changing the image, when the same image is displayed for many
hours. In this case the screen will recover slowly by changing the image or
turning off the display for several hours.

■ Max. non-stop operating time and conditions

(1)

Avoid displaying the same image for extended periods of time.

(2)

It is recommended to periodically change the background colour and background image.

The power management feature of this product complies with power saving requirement of
VESA DPMS. When activated, it automatically reduces unnecessary power consumption of
the monitor when your computer is not in use.

To use the feature, the monitor needs to be connected to a VESA DPMS compliant computer.
There is a power management step the monitor takes as described below. The power manage-

ment function, including any timer settings is configured by the operating system. Check your
operating system manual for information on how this can be configured.

■

Power Management Mode

When the H-sync. signal / V-sync. signal / H and V sync. signals from the computer are off, the
monitor enters into power management mode which reduces the power consumption to less than

0.5W. The screen becomes dark. From power management mode, the image reappears in
several seconds when either the keyboard or the mouse are touched again.

Power Indicator

(3)

Maximum operating time of the display is 20 hours per day, if the Anti Image Retention is set if on.
Image Retention is off, do not exceed a 12 hours operating time per a day.

(4)

If the screen is active for a longer period of time, it is recommended to

I.

Run the screensaver (motion picture or black pattern)

II.

Power off the system for a while

(5)

Make sure that the screen is suitably ventilated, or is used in conjunction with climate control system
if installed into any bespoke cabinets.

(6)

We strongly recommend an active cooling system with fans for long operating times, especially for
high luminance LCD models.

■ This LCD cannot be used outdoors.

■ If you use a cable longer than the supplied one the picture quality is not guaranteed.

Touch function can be disrupted if the USB cable length exceeds 3m.

NORMAL MODE

POWER MANAGEMENT MODE

Green

Orange

POWER 0 0.5W
CONSUMPTION

100%

※

Customer Service

-

Even when using the power management mode, the monitor consumes electricity. Turn off the power
switch whenever the monitor is not in use, during the night and weekends, to avoid unnecessary power
consumption.

-

It is possible that the video signal from the computer may be on while the H or V sync. signal is missing. In
this instance, the POWER MANAGEMENT feature may not work properly.

■ If you have to return your unit for service and the original packaging has been
discarded, please contact your dealer or Displaylite for advice or replacement
packaging.

NOTE

W
ARNING

Displaylite Reflect 32 / 46

※

Cleaning

9.5. Input Source

WARNING

If you drop any materials or liquids such as water into the monitor when cleaning, unplug
the power cable immediately and contact your dealer or Displaylite.

CAUTION

For safety reasons, turn off the power switch and unplug the monitor before you clean it.

NOTE

■

To protect the LCD panel, do not scratch or rub the screen with a hard object.

■

Touching the case with any product made from rubber or plastic for a long time may
cause degeneration or loss of paint on the case.

■

Never use any of the following solvents. These will damage the case and the LCD
screen.

Thinner

Spray-type cleaner

Benzine
Wax

Abrasive cleaner
Acid or Alkaline solvent

-

When only one of the three signal inputs is connected to the signal source, the one connected is
automatically selected. Input source functions are not available if there is no signal input from the selected
connector or during the power management mode.

9.6. Information

CASE: Stains can be removed with a cloth lightly moistened with a mild detergent solvent.
Then wipe the case with a soft dry cloth.

LCD: Periodic cleaning with a soft dry cloth is recommended.
SCREEN: Don't use tissue paper etc. as this may damage the LCD screen.

Displays information regarding the current input signal coming from the graphics card in your computer.

※

Ergonomic Recommendations

-

See your graphics card user guide for more information about changing the resolution and refresh
rate.

■ To eliminate eye fatigue, do not operate the monitor against a bright background or in
a dark room. For optimal viewing comfort, the monitor should be just below eye level
and 40-60cm (16-24inches) away from your eyes. When using the monitor over a
prolonged time, a ten minute break every hour is recommended as looking at the
screen continuously can cause eye strain.

- 26 -

- 7 -

NOTE

NOTE

W

ARNING

Adjustment Item

Problem Button to Press

Input Source

Auto

Select the signal input automatically.

VGA

Select the analog input.

DVI

Select the digital(DVI) input.

HDMI

Select the digital(HDMI) input.

Displaylite Reflect 32 / 46

1. Safety Precautions

WARNING

■

STOP OPERATING THE MONITOR IMMEDIATELY

∙

If you notice any abnormal phenomena such as smoke, strange sounds or fumes,
unplug the monitor and contact your dealer or Displaylite immediately.
Further use may be dangerous and can cause fire or electric shock.

■

NEVER REMOVE THE OUTER CASE

∙

High voltage circuits are inside the monitor. Removing the case may expose you to
the danger of fire or electric shock.

■

DO NOT PUT ANY OBJECT INTOTHE MONITOR

∙

Do not put any solid objects or liquids such as water into the monitor. In case of an
accident, unplug your monitor immediately and contact your dealer or Displaylite.
Using the monitor with any object inside may cause fire, electric shock or
damage.

■

PLACETHE MONITOR ON A FLAT, STABLE SURFACE

∙

The monitor may cause an injury if it falls or is dropped

.

■

DO NOT USE THE MONITOR NEAR WATER

∙

Do not use where water may be splashed or spilt onto the monitor as it may cause fire
or electric shock

.

■

OPERATE WITH THE SPECIFIED POWER SUPPLY

∙

Be sure to operate the monitor only with the specified power supply. Use of an
incorrect voltage will cause malfunction and may cause fire or electric shock

.

■

PROTECT THE CABLES

∙

Do not pull or bend the power cable and signal cable. Do not place the monitor or any
other heavy objects on the cables. If damaged, the cables may cause fire or electric
shock

.

■

ADVERSE WEATHER CONDITIONS

∙

It is advisable not to operate the monitor during a heavy thunder storm as the
continual breaks in power may cause malfunction. It is also advised not to touch the
plug in these circumstances as it may cause electric shock

.

9.4. Other Settings

* If the screen is used in a face-up position, please be sure to turn on the FAN function.

- 8 -

- 25 -

Adjustment Item

Problem Button to Press

Language

English
Français
Español
Deutsch

English
French
Spanish
German

Nederlands
Poliski
Pусский
Italiano

Dutch
Polish
Russian
Italian

OSD time out

You can set the OSD display duration time.
Between 5 and 30 seconds.

▲

▼

Volume

Reduce
Increase

▲

▼

Mute
On

Turn off the sound temporarily.

Off

Return the sound volume to the previous level.

Fan

*

On

Fan is turned on.

Off

Fan is turned off.

Anti-Image Retention
On

Automatically displays moving patterns (shifting by 2 pixels) to
prevent image retention on the screen.

Off

Anti-image retention is turned off.

Sensor
On

Sensor on.

Off

Sensor off.

Factory Reset

Factory-preset data is restored.

- 9 -

- 24 -

Displaylite Reflect 32 / 46

9.3. Display Settings

CAUTION

■

INSTALLATION LOCATION

∙

Do not install the monitor where sudden temperature changes may occur, or in humid,
dusty or smoky areas as it may cause fire, electric shock or damage. You should also
avoid areas where the sun shines directly on the monitor

.

■

DO NOT PLACETHE MONITOR IN A HAZARDOUS POSITION

∙

The monitor may topple and cause injury if not suitably located. Please also ensure
that you do not place any heavy objects on the monitor, and that all cables are routed
such that children may not pull the cables and possibly cause injury.

■

MAINTAIN GOOD VENTILATION

∙

Ventilation slots are provided to keep the monitor from overheating. Covering the slots
may cause fire. To allow adequate air circulation, place the monitor at least 10 cm (or 4
inches) from any walls.

∙

Do not remove the tilt stand when operating the monitor. Ventilation slots on the back
of the cabinet will be blocked and the monitor may overheat if the stand is removed.
This may cause fire or damage. Operating the monitor on its back, side, upside
down or on a carpet or any other soft material may also cause damage

.

■

DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR

∙

When you move the monitor, turn off the power switch, unplug the monitor and be
sure the signal cable is disconnected. If you do not disconnect them, it may cause fire
or electric shock

.

■

UNPLUG THE MONITOR

∙

If the monitor is not in use for a long period of time it is recommended that it is left
unplugged to avoid accidents

.

■

HOLDTHE MAINS PLUG WHEN REMOVING

∙

To disconnect the power cable or signal cable, always pull it by the plug. Never pull on
the cable itself as this may cause fire or electric shock

.

■

DO NOT TOUCH THE PLUG WITH WET HANDS

∙

Pulling or inserting the plug with wet hands may cause electric shock

.

■

WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER

∙

Be sure the computer is strong enough to hold the weight of the monitor,
otherwise, you may damage your computer.

■

RECOMMENDATIONS FOR 24/7 USAGE

∙

This product is not specifically designed for 24/7 usage in all environments.

*1. Only Analog input.
*2. For best results, use the Auto Adjust in conjunction with an adjustment image or the intended image.

Adjustment Item

Problem

Button to Press

Aspect Ratio

Off

Aspect ratio is turned off.

16 : 10

Displays all picture in 16 : 10 aspect ratio.

5 : 4

Displays all picture in 5 : 4 aspect ratio.

4 : 3

Displays all picture in 4 : 3 aspect ratio.

Gamma

You can set the gamma.
Native / 2.2 / 1.8

Sharpness

You can change the picture quality from 0 to 100
(soft to sharp).
Press the ▲ button to change the picture quality in
numerical order. Press the ▼ button change the
picture quality in reverse numerical order.

▲
▼

H. Position

*1

Left
Right

▲

▼

V. Position

*1

Down
Up

▲

▼

Clock

Narrow
Wide

▲

▼

Phase

To correct flickering text or lines

▲

▼

Auto Adjust

*2

Adjust H. / V. position, clock and phase automatically.

- 23 -

- 10 -

2. Unpacking

1) Before unpacking your monitor, prepare a stable, level, and clean surface near a wall
outlet.
Set the LCD monitor box in an upright position and open the top of the box.

2) Remove the interlock handles.

3) Remove the top cushion and take
the accessories box and the monitor out.

Displaylite Reflect 32 / 46

9. Adjustment Menu Contents

9.1. Brightness / Contrast

-

Moving the monitor requires at least two people, otherwise it may be dropped and result in a serious injury.

-

When moving/shipping the monitor, please hold by the carton cut-outs. *Adjust the brightness when you are using the monitor in a dark room and feel the screen is too bright.

9.2. Colour Settings

-

Please use caution when opening the packaging as sharp tools can damage the monitor.

-

This would invalidate the warranty.

CAUTION

CAUTION

Adjustment Item

Option

Button

to Press

Brightness*

Darker
Brighter

▲

▼

Contrast*

Reduce
Increase

▲

▼

Adjustment Item

Option Button to Press

Colour Temp.

10000K

More bluish white

9300K

Bluish white

6500K

Reddish white

USER
RED

Decrease

▲

Increase

▼

GREEN

BLUE

- 22 -

- 11 -

Displaylite Reflect 32 / 46

■

LOCK MODE: Disables the Menu buttons on the rear of the monitor

Press and hold the MENU button and the power switch for about 3 seconds when the menu is
not displayed.

- The OSD menu is not displayed when the OSD is locked. Pressing and holding the MENU button and
the power switch for about 3 seconds when the menu is not displayed.

The following OSD menu is displayed.

Adjustment Item

Problem/Option

OSD
On

The OSD menu is locked

Off

The OSD menu is unlocked

Power Key
On

The POWER SWITCH is locked

Off

The POWER SWITCH is unlocked

Remote Control
On

The Remote Control is locked

Off

The Remote Control is unlocked

3. Installation

∙

Follow the manual instructions for the type of mount you have selected. Refer all servicing to
a qualified service personnel.

∙

Moving the monitor requires at least two people.

∙

Before installing, please make sure the wall is strong enough to hold the combined weight of the
display and the mount.

3.1. WALL MOUNTING

■

PALM REJECTION FUNCTION (Optional conductive pen not supplied):

Palm rejection is a way to disregard a finger while using the pen mode.
When you touch the screen with a pen, palm rejection is activated and the screen does not

recognise touch made with the finger.
If the screen is not touched with a pen for 1 second, it will automatically return to the finger
mode.

-

The screen works only with conductive pens with a Φ4-5mm diameter.

-

The touch panel does not recognize pens with smaller or larger diameter.

-

Touch made by a pen is not recognized within 15mm distance from edge of the active display area.

- When wall mounting, ensure the thickness of the supporting wall is sufficient to hold the total weight.

- The monitor is secured using M6 Screws and washers, ensure screw does not penetrate the
monitor chassis by more than 10mm (see diagram). Using a screw longer than this may cause
electric shock or damage because it may contact with the electrical parts inside the monitor.

3.2. FAN

- If the screen is used in a face-up position, please be sure to turn on the FAN function.

- If you do not use the FAN, the internal temperature may rise and the product life may decrease.

- If the screen is built into an external cabinet, please ensure ventilation and cooling inside the
cabinet is adequate.

- Dirt and dust may stick to the FAN, reducing the cooling effect which may result in a shorter life cycle
of the product. Please clean regularly.

3.3. ROTATING THE DISPLAY

∙ The monitor is designed to be compatible in both landscape and portrait modes.

Available

Not Available

Landscape

Portrait

NOTE

CAUTION

CAUTION

- 12 -

- 21 -

Displaylite Reflect 32 / 46

4. Product Features

▶

Front

▶

Rear

8. Operating The Monitor

To create the best picture, your LCD monitor has been configured at the factory with the COMPLIANT
TIMING shown on page 31. You are also able to adjust the picture by following the button operation
shown below. For more detailed adjustments, see page 23 for Adjustment Menu.

1.

Press the MENU Button to start the on screen display feature. There are additional menu items
which can be switched by using the ▲ / ▼ Buttons.

2.

Select the menu item of the adjustment you want to make. Press the ▶ or OK Buttons and enter
the menu page. Then, use the ▲ / ▼ buttons to highlight the desired adjustment item.

3.

Press the ▶ or OK buttons again. Use the ▲ / ▼ buttons to make the appropriate adjustment or
setting.

4.

Press the EXIT button to leave the menu, any changes will be automatically saved.

-

For example, to correct vertical position, select Menu item of "Display Settings". Select "V".

-

Position "by using the ▲ / ▼ buttons. Press the ▶ or OK buttons.

-

Use the ▲ / ▼ buttons to change the vertical position settings.

-

When button operations are aborted during adjustment, the on-screen display disappears when the time set
for the OSD timeout has passed.

-

The MENU / EXIT button can be used to return previous menu item.

-

Any changes are automatically saved in the memory when the on screen display disappears.
Turning off the power should be avoided while using the menu.

-

Adjustments for image H./V. position, clock and phase are saved for each signal timing. Except for these
adjustments, all other adjustments have only one setting which applies to all signal timings.

POWER

UP

DOWN

AUTO/EXIT

SOURCE/OK

MENU

LED

IR

AC USB COM HDMI

DVI VGA AUDIO IR

IN IN IN IN IN IN

NOTE

- 20 -

- 13 -

Displaylite Reflect 32 / 46

7. Computer Setting

■

Signal Timing

A list of supported video signal timing can be found on page 31: COMPLIANT TIMING.

▶

Input Ports

■

Windows 7/8/10 Plug & Play

The LCD monitor complies with the DDC2B of VESA standard. The Plug & Play function runs on
Windows 7/8/10 by connecting the monitor to a DDC2B compliant computer with the signal cable

supplied.

- The touch screen is HID Plug & Play compliant and should not require any drivers to be installed. Touch
screen calibration can be carried out within the Windows environment. Calibration within Linux or Android
will be dependent on the OS version and build.

➊

POWER

➋

UP

➌

DOWN

➍

AUTO/EXIT

➎

SOURCE/OK

➏

MENU

POWER

UP

DOWN

AUTO/EXIT

SOURCE/OK

MENU

LED

IR

➒

AC USB C OM HDMI DVI

VGA AUDIO IR

IN IN IN IN IN

■

Procedure for powering on the system

Turn ON the monitor first, and then the computer.

■

MULTI-TOUCH

This monitor complies with DDC2B of VESA standard. (Plug & Play compliant)
The MULTI-TOUCH function runs on Windows 7/8/10 by connecting the monitor to DDC2B

compliant computer.

➐

LED

➑

IR

Use with the USB cable supplied.

■

MULTI-TOUCH support operation system

Microsoft Windows 7 (64bit and 32bit)
Microsoft Windows 8 (64bit and 32bit)
Microsoft Windows 10 (64bit and 32bit)
Linux 3.8 and Over
Android Kernel 4.0 and Over.

Earlier Windows versions are not supported.

➊ POWER Power

Button

➓ AC IN

AC-

Touch Controller Operating System Compatibility and Functions List

OS

Mouse

Gestures

Plug and Play

Win 10/8/7 O O

O

Linux O O
(Kernel 3.8 and Over)

O

(Kernel 3.8 and Over)

Android O O

(Kernel 4.0 and Over)

O

(Kernel 4.0 and Over)

Functions

Click, Drag, Double

Click

Mouse Functions, Press and Tap,

Rotate, Zoom In/Out

-

➋ UP

Up/Volume + Button

➌ DOWN

Down/Volume - Button

➍ AUTO / EXIT

Auto/Exit Button

➎ SOURCE / OK

Input Select/OK Button

➏ MENU

Menu Button

➐ LED

Green : Normal Operation Orange :
Power Managemen

AC Connector(~ : Alternating current) (AC-IN)

AC SWITCH (- ON) / ◦OFF)

MAIN POWER : Main Power Switch

USB

Touch USB Connector

COM IN

D-SUB 9pin, RS232C Connector

HDMI IN

HDMI Connector

DVI IN

DVI-D 24pin Connector

VG

NOTE

10

11

12

13

14

15

16

17

18

19

Displaylite Reflect 32 / 46

5.

Remote Control

∙

To use the remote control we advise you to position it at the back of the monitor (left side) where
the remote sensor is located. It might not work if you use it standing in front of the monitor.

POWER

Turns the monitor ON and OFF.

POWER

MUTE

MUTE

Turns on or off the mute function when
the menu is not displayed.

MENU

Opens the monitor’s on-screen menu systems.

When the menu system is already open,

pressing this button will select the previous

submenu.

▲▼◀▶

Navigates through submenus and settings.

▲

: Up Button

MENU

AUTO

OK

AUTO

Adjust H. / V. Position, Clock and Phase
automatically.

POWER

UP

DOWN

AUTO/EXIT

SOURCE/OK

MENU

▼

: Down Button

LED

IR

AC USB C OM HDMI

DVI VGA AUDIO IR

◀

: Left Button

▶

: Right Button

PLAY

OK

Confirms your selection or saves changes.

IN I N IN IN IN IN

PLAY

Not available on this model.

EXIT

Returns to a previous menu or closes

the OSD Menu.

STOP

Not available on this model.

EXIT

STOP

SELECT

VOL

VOL

▲

: Increases the sound volume.

▼

: Decreases the sound volume.

SELECT

Selects the source.

AC IN

USB RS-232C HDMI IN DVI IN

VGA IN

AUDIO IN IR

USB

Touch

Camera

IR Cable Supplied

-14- -19-

- 18 -

- 15 -

Displaylite Reflect 32 / 46

6.

How to Connect Cables

With reference to diagram on page 19, ensure that both the computer and the monitor are
switched off. Connect the computer to the monitor with a video signal cable.
Connect the computer to the monitor with the USB cable(s) and connect the IR Cable.
Connect the power cable to the monitor first and then to the power supply.
Turn on your monitor (mains power switch and power switch) and computer.

-

The video signal cables used for connecting the computer and monitor may vary with the type of computer
used. An incorrect connection may cause serious damage to both the monitor and the computer. The
cables supplied with the monitor are for standard connector types. If a special cable is required please
contact your local dealer or Displaylite.

-

Make sure you tighten the finger screws at each end of the signal cable.

-

When the USB cable is connected please wait 8 seconds for the touch function to enable touch operation. It
can be activated by conductive stylus / pen or finger.

5.1. PREPARING THE REMOTE CONTROL

∙

To use the remote control, insert the cell battery (CR2032).

- Do not use any other batteries other than those specified in this manual for the Remote Control.

- Burst batteries or the electrolyte from these batteries may cause stains, fire or injury.

1) Push lock to right and remove the battery case in the direction of the arrow.

2) Place the battery face up (the + side of the button battery).

3) Replace the battery case in the direction of the arrow.

Button Battery
(Included)

-

The RS232 port can be used to control the monitor via a computing device to change the settings of the
monitor remotely such as turning the monitor on, off or performing a reset. Please contact Displaylite for
further details.

CR2032

CR2032

-

Replace with new batteries when the remote control does not work close to the monitor. Use
the button battery (CR2032).

-

Operate the remote control by pointing it toward the remote sensor on the monitor.

-

Other manufacturers remote control will not work with this monitor. Use the remote control provided
only.

-

Used batteries. To dispose of used batteries please follow the correct procedure as per your
local regulations.

NOTE

NOTE

CAUTION

- 16 -

- 17 -

Displaylite Reflect 32 / 46

5.2. BASIC OPERATION

■

Turning the monitor ON

■

Move the cursor horizontally

[Remote Control]

The monitor turns on and the power indicator turns green when you press the power button on
the monitor or the remote control. The monitor turns off and the power indicator turns orange
when you press the power button on the monitor or the remote control. Press again to turn the
monitor on.

Select menu or setting, or perform the adjustment
by pressing the ◀ / ▶button on the remote control
while the menu page is displayed on the screen.

POWER MUTE

MEMU AUTO

OK

PLAY

[Monitor] [Remote Control]

EXIT

STOP

VOL

- Even when using the power management mode or turning

OFF the power switch, the monitor will consume a small
amount of electricity. Disconnect the power cable from the
power supply whenever the monitor is not in use or during
the night, to avoid unnecessary power consumption.

POWER

UP

DOWN

AUTO/EXIT

POWER

MUTE

MEMU AUTO

OK

■

Adjust the volume

SELECT

[Monitor] [Remote Control]

SOURCE/OK

MENU

LED

IR

PLAY

EXIT STOP

SELECT

VOL

Press the UP / DOWN Button on the monitor or the
VOL ▲ / ▼ Button on the remote control to adjust
the volume when the menu page is not displayed
on the screen.

POWER

UP

DOWN

AUTO/EXIT

SOURCE/OK

POWER

MUTE

MEMU

AUTO

OK

PLAY

VOL

■

Turning the setup menu ON

[Monitor] [Remote Control]

MENU

LED

EXIT

STOP

SELECT

The menu page appears on the screen when you

press the MENU Button on the monitor or the

POWER

UP

POWER MUTE

IR

Remote Control.

The menu page disappears when you press the

DOWN

AUTO/EXIT

MEMU

AUTO

OK

■

Switch the input signal

[Monitor] [Remote Control]

EXIT Button on the Monitor or the Remote Control.

SOURCE/OK

MENU

LED

IR

PLAY

EXIT

STOP

SELECT

VOL

This is activated when you successively press the
SOURCE button on the monitor or SELECT button
on the remote control.

POWER

UP

DOWN

AUTO/EXIT

POWER MUTE

MEMU AUTO

OK

■

Move the cursor vertically

[Monitor] [Remote Control]

SOURCE/OK

MENU

PLAY

EXIT

STOP

SELECT

VOL

Select adjustment by pressing the UP / DOWN
Button on the monitor or the ▲ / ▼ Button on the
remote control while the menu page is displayed
on the screen.

POWER

UP

DOWN

AUTO/EXIT

SOURCE/OK

POWER

MUTE

MEMU AUTO

OK

PLAY

VOL

LED

IR

MENU

LED

IR

EXIT

STOP

SELECT

NOTE