Disney CR-150 User Manual
Headphone Mode
Controls and Indicators
Speaker Mode
Battery Compartment
Power Indicator Light
(Speaker Mode)
In headphone mode, privately enjoy full rich sound in comfort with noise
isolation padding.
1. Connect the plug at the end of the headphone cable to the headphone
or audio out jack on your audio device. Make sure audio device is turned
on.
2. Turn the volume knob to adjust the volume. You may also want to adjust
the volume on your audio device for the best sound level.
CAUTION: Avoid using headphones near magnets, including magnetic
jewelry such as earrings, bracelets or necklaces, as the magnetic speaker
switch could be activated, resulting in an abrupt unwanted increase in
volume.
In speaker mode, a magnetic proximity switch activates the battery preamp to kick up the output for
listening at room volume.
Model: CR150
Instruction Manual - Front
Date: Sep 19, 2011
Print color : 1C+1C Black text on white paper
Size: 288W x 145H mm
Questions? Visit www.ihomeaudio.com
Limited One-Year Warranty
Questions or Comments
CR150-091911-A
Printed in China
KIDdesigns warrants this product to be free from defects in workmanship and materials, under normal use and
conditions, for a period of one year from the date of original purchase.
Should service be required by reason of any defect or malfunction, it is best to first return this product and all parts
thereof to the store where it was originally purchased. If you need to send the product for service during the warranty
period, KIDdesigns will repair or, at its discretion, replace this product without charge (except for a $6.00 charge for
handling, packing, return UPS/postage and insurance). This decision is subject to verification of the defect or
malfunction upon delivery of this product to the Factory Service Center listed below. The product must include proof
of purchase, including date of purchase.
Before returning this product for service, please first replace the batteries (if applicable) with fresh ones, as exhausted
or defective batteries are the most common cause of problems encountered.
If service is still required:
1. Remove batteries (if applicable) and pack unit in a well-padded, heavy corrugated box.
2. Enclose a photocopy of your sales receipt, credit card statement, or other proof of the date of purchase.
3. Enclose a check or money order payable to the order of KIDdesigns, for the sum of $6.00.
4. Send the unit prepaid to the Factory Service Center listed below.
NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover
(i) products which have been damaged by negligence, misuse or accident, or which have been modified or repaired
by unauthorized persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to tape
cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return to the
owner.
This warranty is valid only in the United States of America and does not extend to owners of the product subsequent
to the original purchaser. Any applicable implied warranties are also limited to one year, and KIDdesigns will not be
liable for consequential damages. (Some states do not allow limitations on implied warranties or exclusion of
consequential damages, so these restrictions may not apply to you.) This warranty gives you specific legal rights,
and you may also have other rights which vary from state to state.
Send unit to:
Consumer Repair Department
KIDdesigns, Inc.
1330 Goodyear Dr. El Paso, TX 79936-6420
© Disney/Pixar
Visit disney.com/cars
Distributed by KIDdesigns, Inc. Rahway, NJ 07065-5024
eKids is a wholly owned subsidiary of KidDesigns, Inc,
1299 Main Street Rahway NJ 07065
• For questions or comments regarding this or other KIDdesigns products, please call our toll-free number:
1-888-TOP-TOYS Also visit our website: www.kiddesigns.com
If problems persist, please do not attempt to repair unit; see warranty for factory service.
Important Message to Customers
Thank you for purchasing one of Disney/Pixar’s many top-quality electronic products. We would
appreciate it if you take a few moments to read through these instructions. This will help you explain
to the child the safe and proper way to use this product, and to help give it the long-lasting life that
Disney/Pixar products are designed for.
Model CR-150
SPEAKERS AND
HEADPHONES
Model: CR150
Instruction Manual - Back
Date: Sep 19, 2011
Print color : 1C+1C Black text on white paper
Size: 288W x 145H mm
Headphone Mode
Controls and Indicators
Speaker Mode
1. Connect the plug at the end of the headphone cable to the headphone or audio out jack on your audio
device. Make sure audio device is turned on.
2. Turn the headphone cups so they are facing up when on a flat surface.
3. Press the square switch on the bottom of one cup (near the headphone cable) into the square switch
socket on the other. The red power LED will light up when the connection is complete.
4. Tune the volume knob to adjust the volume. You may also want to adjust the volume on your audio
device for the best sound level.
NOTE: Separate phone cups/break the connection when not using as speakers to avoid draining the
batteries.
Battery Compartment
Proximity Switch
Inline Volume Control
Power Indicator Light
(Speaker Mode)
Installing/Replacing Batteries for Speaker Mode Operation
The CR-150 uses 2 “AAA” batteries for speaker mode operation.
If the sound becomes weak or distorted, it is time to replace the
batteries.
1. Twist the top of the left headphone cup counterclockwise (left) to
open the battery compartment cover.
2. Insert 2 “AAA” batteries as indicated.
• We recommend the use of alkaline batteries for longer life.
3. Replace headphone cup cover (line up guidelines on cover and
body of headphone cup) and turn clockwise (right)
Batteries information
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbone-zinc) or rechargeable
(nickel-cadmium) batteries.
Install / Replace Batteries
In headphone mode, privately enjoy full rich sound in comfort with noise
isolation padding.
1. Connect the plug at the end of the headphone cable to the headphone
or audio out jack on your audio device. Make sure audio device is turned
on.
2. Turn the volume knob to adjust the volume. You may also want to adjust
the volume on your audio device for the best sound level.
CAUTION: Avoid using headphones near magnets, including magnetic
jewelry such as earrings, bracelets or necklaces, as the magnetic speaker
switch could be activated, resulting in an abrupt unwanted increase in
volume.
In speaker mode, a magnetic proximity switch activates the battery preamp to kick up the output for
listening at room volume.
Step 1
Step 2
Step 3
Model: CR150
Instruction Manual - Front
Date: Sep 19, 2011
Print color : 1C+1C Black text on white paper
Size: 288W x 145H mm
Questions? Visit www.ihomeaudio.com
Limited One-Year Warranty
Questions or Comments
CR150-091911-A
Printed in China
KIDdesigns warrants this product to be free from defects in workmanship and materials, under normal use and
conditions, for a period of one year from the date of original purchase.
Should service be required by reason of any defect or malfunction, it is best to first return this product and all parts
thereof to the store where it was originally purchased. If you need to send the product for service during the warranty
period, KIDdesigns will repair or, at its discretion, replace this product without charge (except for a $6.00 charge for
handling, packing, return UPS/postage and insurance). This decision is subject to verification of the defect or
malfunction upon delivery of this product to the Factory Service Center listed below. The product must include proof
of purchase, including date of purchase.
Before returning this product for service, please first replace the batteries (if applicable) with fresh ones, as exhausted
or defective batteries are the most common cause of problems encountered.
If service is still required:
1. Remove batteries (if applicable) and pack unit in a well-padded, heavy corrugated box.
2. Enclose a photocopy of your sales receipt, credit card statement, or other proof of the date of purchase.
3. Enclose a check or money order payable to the order of KIDdesigns, for the sum of $6.00.
4. Send the unit prepaid to the Factory Service Center listed below.
NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover
(i) products which have been damaged by negligence, misuse or accident, or which have been modified or repaired
by unauthorized persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to tape
cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return to the
owner.
This warranty is valid only in the United States of America and does not extend to owners of the product subsequent
to the original purchaser. Any applicable implied warranties are also limited to one year, and KIDdesigns will not be
liable for consequential damages. (Some states do not allow limitations on implied warranties or exclusion of
consequential damages, so these restrictions may not apply to you.) This warranty gives you specific legal rights,
and you may also have other rights which vary from state to state.
Send unit to:
Consumer Repair Department
KIDdesigns, Inc.
1330 Goodyear Dr. El Paso, TX 79936-6420
© Disney/Pixar
Visit disney.com/cars
Distributed by KIDdesigns, Inc. Rahway, NJ 07065-5024
eKids is a wholly owned subsidiary of KidDesigns, Inc,
1299 Main Street Rahway NJ 07065
• For questions or comments regarding this or other KIDdesigns products, please call our toll-free number:
1-888-TOP-TOYS Also visit our website: www.kiddesigns.com
If problems persist, please do not attempt to repair unit; see warranty for factory service.
Important Message to Customers
Thank you for purchasing one of Disney/Pixar’s many top-quality electronic products. We would
appreciate it if you take a few moments to read through these instructions. This will help you explain
to the child the safe and proper way to use this product, and to help give it the long-lasting life that
Disney/Pixar products are designed for.
Model CR-150
SPEAKERS AND
HEADPHONES
Loading...