Disgo 9000 User Manual

Tablet 9000

Android 4.0

9.7” Capacitive Touch screen

User Manual

Thank you for choosing the disgo Tablet 9000.

The Tablet 9000 is fully equipped to offer you the complete browsing

and multimedia experience.

 Android 4.0 Operating System
 9.7” capacitive touch screen with 1024 x 768 resolution
 Built-in front and rear camera with still image and video

recording

 3D Motion Sensor for automatic orientation
 MicroSD and USB for added connectivity

IMPORTANT

1) Please charge the Tablet 9000 continuously for 4 hours

before use.

2) For information on inserting/removing the Micro SD card,

please refer to section 3.4 – Storage. Failure to do so may

result in damage to the memory card.

3) Some applications run in a full screen mode. The icons on

the toolbar will not be displayed.

4) Please do not save/transfer personal/media files to the

onboard storage as this may slow down the operation of

the device

Contents

1. Accessories

2. Getting Started

2.1 Appearance

2.2 Charging the tablet

2.3 Using the tablet

2.4 Toolbar

2.5 Accessing the applications

2.6 Using basic applications

3. Settings

3.1 Wireless & networks

3.2 Sound

3.3 Display

3.4 Storage

3.5 Battery

3.6 Apps

3.7 Accounts & sync

3.8 Location services

3.9 Security

3.10 Language & input

3.11 Backup & reset

3.12 Date & time

3.13 Accessibility

3.14 Developer options

3.15 About tablet

4. Using MicroSD Card

5. Using HDMI

6. Technical features

7. Recycling

8. Troubleshooting

9. Battery Statement

1. Accessories

Inside the disgo Tablet 9000 packaging, you will find:

1 x 9.7” Tablet
1 x power adapter
1 x Quick Start Guide
1 x USB OTG cable

2. Getting started

2.1 Appearance

Fig 2.1.1

Fig 2.1.2

Button descriptions

On/Off

When the tablet is switched off, press
and hold this button to turn it on.
When the tablet is turned on, press
and hold this button to activate the
shut-down window.

VOL +

Increase the volume.

VOL -

Decrease the volume.

2.2 Charging the tablet

Plug the adapter to the mains and the DC
connector into the DC-in jack as shown in figure

2.1.2, (5V DC in). A full charge takes up to 4
hours.

2.3 Using the tablet

Power on the device

• Press and hold the Power button for 2

seconds in order to turn on the device.

Sleep mode

• Pressing the Power button will
activate/deactivate sleep mode when the
device is turned on.

Using pre-installed apps

• To open and use the pre-installed apps,
simply touch the relevant icon/app. The

main application page can be accessed by

touching the application icon , on the home
screen. See section 2.5 Using the applications,
for more

Personalising your desktop

• To add an app to the home/desktop screen,
access the applications screen (Fig 2.5.2).
Touch and hold the app you would want on
the desktop. The desktop will appear

behind the icon. Move the icon to the
desired area of the desktop and release the
icon to confirm the placement.

Deleting an icon from the desktop

• To delete an app or widget from the desktop;
press, hold and drag the icon to “x Remove”

which appears at the top of the page as
shown below in figure 2.3.1.

Fig. 2.3.1

Using Widgets on your desktop

• You can also add and delete widgets to/from
the Home screen by using the procedures
outlined in the previous two sections.

Powering off the device

• Press and hold the Power button for 2
seconds to activate the power-off screen.

Note: you can also access the Silent Mode option from
this screen.

The widget desktop

Fig.2.3.2

As shown in Fig.2.3.2, the Android 4.0 interface has a

toolbar at the bottom to the screen for ease of

navigation. In some cases, the toolbar icons will be

minimized and are denoted by grey dots. Simply touch

on the dot to re-enable the toolbar.

2.4 Toolbar

Fig.2.4.1

The toolbar is located at the bottom of the screen.

Return

Return to previous screen.

Home

Touch the Home icon to return to the
desktop. This action will not close
the applications that are open.

Recent
Apps

Displays list of applications used
recently.

Volume +

Increase volume.

Volume -

Decrease volume.

Menu

Displays menu available for current
application/screen

Messages

Shows information such as micro SD
card inserted or Wi-Fi connection.

Time

Shows current time

Battery

Shows the charge status of the
battery

The purpose of each icon and its function is
described below:

Note: Volume control only appears when media related

applications are used. The message indicator will

show the status such as download or SD card

notifications when needed.