Discover DL BLUE BATTERY User Manual

DL BLUE BATTERY
WARRANTY POLICY

DOCUMENT NUMBER

885-0021

885-0021 REV B

#4 -13511 Crestwood Place, Richmond, BC, V6V 2E9, Canada + 1.778.776.3288 [e-mail]

discoverbattery.com

2

NON-TRANSFERABLE

LIMITED PERFORMANCE WARRANTY

Discover Energy Corp. (Discover), together with its agents, dealers, and distributors, warrants to the original
product purchaser (User), that your Discover Lithium Series Battery (Battery) is free from manufacturing
defects that would prevent the battery from delivering unlimited cycles while maintaining at least 60% of the
original Rated Wh for the earlier of the listed Base Workmanship Warranty Period or Total Energy Throughput
Limit. If the original Battery is registered with Discover within 30 days of installation, the warranty will be for
the earlier of the listed Extended Workmanship Warranty Period or Total Energy Throughput Limit as per the
table below, subject to the terms and conditions outlined herein.

Battery

Model

BLUE SERIES G24 12V / 24V / 36V

BLUE SERIES GC12 12V / 24V 1425 kWh 4.5 MWh

(*) Extended Workmanship Warranty Requires Registration at www.discoverbattery.com/product-registration

Volts

Base Workmanship

Warranty Period

3 years

*Extended

Workmanship

Warranty Period

5 years with

registration

Annual Energy

Throughput Limit

725 kWh 2.2 MWh

Total Energy

Throughput Limit

Definitions

“Annual Energy Throughput” means the aggregate energy charged and discharged through the Battery as
logged by the on-board data logger over one year.

“Base Workmanship Warranty Period” means the total period in years from the initial installation date that the
Battery is covered by this Warranty.

“Extended Workmanship Warranty Period” means the total period in years from the initial installation date
that the Battery is covered by this Warranty. (Requires Registration within 30 days of installation)

“Rated Wh” means the Battery’s nominal rated Watt-hour (Wh) energy at the time of manufacture and
published in Discover’s technical documentation.

“Stationary Renewable Energy Storage Application” means the Battery application, typically off-grid solar,
micro-grid or backup power, where the Battery is operated in a fixed and stationary position.

“Total Energy Throughput” means the total energy charged and discharged through the Battery as logged by
the on-board data logger.

LIMITATION ON APPLICATIONS

Without the involvement of Discover in system design and Discover’s express written authorization, the Battery
is not intended for use in a Stationary Renewable Energy Storage application, as a primary or backup power
source for life support systems or other medical equipment, or any application where product failure could
lead to injury to persons, loss of life or catastrophic property damage. To the extent permitted by law, Discover
disclaims any and all liability arising out of any such use. Further, Discover reserves the right to refuse to service
any Battery used for these purposes and disclaims any and all liability arising out of Discover’s refusal to service.

#4 -13511 Crestwood Place, Richmond, BC, V6V 2E9, Canada + 1.778.776.3288 [e-mail]

discoverbattery.com