DirecTV Local Channel Connector User Manual
Tune in to your local scene.
Enjoy your local
channels—
including news, weather, live sports
and more—with this Local Channel
Connector. It’s yours to keep!
Before you begin,
nd the perfect spot.
To get the best reception, your antenna
needs to be in a place where it can get a
signal from the nearest broadcast tower.
On or near a window is best. Make sure
the area is free from obstructions or
interference from other devices.
Simple safety tips:
Make sure to read and follow
these safety instructions. You
should keep them for reference.
Do not use near water or heat
3
sources.
Do not block ventilation openings.
3
(Clean only with a dry cloth.)
Local Channel Connector
Quick Start Guide
Aer it’s set up, you may need to test it in
several places to nd the best location.
Note: Use the supplied mounting strips
to secure your antenna in place.
This Local Channel Connector may not be ideal for all situations,
like if you live more than 50 miles away from the nearest broadcast
signal tower. Signal strength in your area may vary. DIRECTV is not
responsible for over-the-air local broadcasting signal strength.
Local Channel Connector (LCC): Receiving local channels
over the air requires use of antenna. On Demand features only
available to DIRECTV customers who receive local channels via
satellite. Channel availability varies by location. DIRECTV is not
responsible for local programming or signal strength. Signal
strength may vary. Installation fee may apply. Maintenance,
replacement and repair not included.
Use only attachments and
3
accessories included in your kit
or specied by the manufacturer.
You may want to unplug it during
3
lightning storms or when not
in use for long periods of time.
Make sure you have easy access
3
to the power cord, but protect it
from being walked on, or pinched.
Do not alter it in any way.
The Local Channel Connector may
3
be hot to touch. Be careful!
A few simple steps, and you’re up and running
Give yourself about 30 minutes for setup, and be aware that your recordings will be interrupted during the process.
1
Connect Antenna Splitter to power
Aer locating an ideal spot and mounting
your Antenna, connect it to the white
Antenna Power Adapter using the USB
Cable, then plug it into an electrical outlet.
2
Connect Coax Cable
to the Local Channel Connector.
3
Connect Local Channel Connector
to your primary DIRECTV receiver and to the
black LCC Power Adapter and then plug it into
an electrical outlet. (The Adapter’s blue LED
will light up to indicate power.)
Note: the Local Channel Connector is not compatible
with Genie Minis.
4
Follow on-screen instructions
If the New Over-the-Air Tuner Found
message doesn’t appear aer 5-10
seconds, see the Troubleshooting section.
800.531.5000 directv.com/lcc Watch a quick how-to video at directv.com/lcc
Loading...