Direct Place 1022301 Assembly Instructions Manual

Assembly Instructions - Please keep for future reference

Assembly Instructions - Please keep for future reference

1022301

Issue 1 - 15-10-2012

Scandi - 2 Door 3 Drawer Wardrobe

Dimensions

Width

Depth

Height

:

:

:

350209 MDF

81.1 cm

49.0 cm

191.3 cm

!

Safety and Care Advice

Important - Please read these instructions fully before starting assembly

Care and maintenance

1

• Check you have all the
components and tools listed on
pages 2 and 3.

• Remove all fittings from the
plastic bags and separate them
into their groups.

• Keep children and animals
away from the work area, small
parts could choke if swallowed.

• Make sure you have enough
space to layout the parts before
starting.

• Do not stand or put weight on
the product, this could cause
damage.

• Assemble the item as close to
its final position (in the same
room) as possible.

• Assemble on a soft level
surface to avoid damaging the
unit or your floor.

• Parts of the assembly will be
easier with 2 people.

• We do not recommend the use
of power drill/drivers for
inserting screws, as this could
damage the unit. Only use hand
screwdrivers.

• Dispose of all packaging
carefully and responsibly

.

• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.

• From time to time check that
there are no loose screws on
this unit.

• This product should not be
discarded with household waste.
Take to your local authority
waste disposal centre.

Note: if required the next
page can be cut out and used
as reference throughout the
assembly. Keep this page
with these instructions for
future reference.

Components - Panels

Please check you have all the panels listed below

2

350209-03 MDF

2

(183,3 cm x 47,5 cm)

Side, right

1

(183,3 cm x 47,5 cm)

Side, left

6

(79,2 cm x 8 cm)

Top rail

4

(78,1 cm x 6 cm)

Plinth, back

12

(45 cm x 9,8 cm)

Drawer side, right/left

10

(77,2 cm x 2,2 cm)

Hanging rail

15

(122,5 cm x 1,7 cm)

H-Profile

13

(74,9 cm x 9,8 cm)

Drawer back

11

(79,3 cm x 15,7 cm)

Drawer front

14

(75,9 cm x 44,7 cm)

Drawer bottom

5

(79,3 cm x 9,6 cm)

Plinth, front

8

(124,5 cm x 39,5 cm)

Door, left

9

(124,5 cm x 39,5 cm)

Door, right

3

(78,1 cm x 47,2 cm)

Top/bottom

7

(174,1 cm x 39,7 cm)

Back

2

x

2

x

3

x

3

x

6

x

3

x

Components - Fittings

Please check you have all the panels listed below

Note: The quantities below are the correct amount to complete the assembly. In some cases more ttings

may be supplied than are required.

3

350174-04 MDF

10

ø7.8 x 40mm Wooden dowel x

Aa Ab

ø6 x 30mm Wooden dowel x

12

Cb

ø5 x 11, cc34mm Bolt x

20

Ca

ø15 x 10.5mm Cam x

20

ø4 x 35mm Screw x

Jc

8

1.2 x 20mm Nail xDa50

Kb

ø5.8 x 8mm Screw x

18

Sk

6

245 x 17 x 10mm Drawer runner x

Yd

1

Nail holder x

Gc

8

ø40 x 35mm Wooden Knob x

ø3.5 x 15mm Screw x

Bc

18

Mc

4

0mm Crossplate x

Me

4

ø26mm Cup hinge x

Fl

2

Support for hanger rail - 15mm x

Wall strap and instruction x 1

Fh

17060 16040 90 15013070 120100 14011050 803020100

Ruler - Use this ruler to help correctly identify the screws

Tools required

Flatblade screwdriver
(Medium)

Hammer

Phillips screwdriver
(Medium & large)

Ke

8

ø6.1 x 11.5mm Screw x

Magnet, adjustable x Pc4

35 x 12 x 1mm Magnet catch x

Pd

4

Back fitting w. ø3.5 x 15mm Screw x

Fi

6

Va

Angle 20 x 20 x 16mm x

4 2

Vg

50 x 50 x 15mm Angle x

ø3 x 12mm Screw x

Bo

4

ø3 x 35mm Screw x

Bp

12

Hk

6

M4 x 9mm Screw x

350209-04 MDF