How it Works
Directed Electronics
Loading...
ORION 8004
User Manual
18 pgs353.71 Kb0

Directed Electronics ORION 8004 User Manual

CONTENTS
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
What’s in the Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Practice Safe Sound™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Record Your Serial Number and Date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
End Panel Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Amplifier Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Signal Input and Output Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Four-Channel Amplifier Input Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
High-Pass Woofers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Fine Tuning the Crossover Frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Auxiliary Output Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
INTELLi Bass Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Amplifier Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Power Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Speaker Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Amplifier Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Choosing Mounting Locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Passenger Compartment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Trunk Compartment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
General Precautions and Installation Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Tools of the Trade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Step By Step Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Set Up and Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Testing the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Adjusting the Sound of the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Troubleshooting Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
1
©2003 Directed Electronics, Inc.
INTRODUCTION
Thank you for your purchase of Orion's 8004 amplifier. Each Orion amplifier is designed to be the leader in its class offering the most power, advanced features, and ease of use. Orion amplifiers are designed as the best affordable high end car audio amplifier money can buy. Listed below are the features of the new Orion 8004.
● 8004 - 100 Watts per channel, four-channel amplifier with dual built-in fully vari-
able high-pass, low-pass, and band-pass 12dB/octave crossovers with INTELLi Bass. The 8004 is capable of six, five, four, three, or two channel operation with a max­imum power capability of 800 Watts into 4W stereo (front and rear channels bridged).
The installation of all Orion amplifiers will determine the overall performance result. Improper installation will not only limit the performance of your Orion system, but also potentially compromise the reliability of the amplifier. To ensure proper sonic results and component reliability, please refer to your authorized Orion dealer for installation assis­tance or advice. If you decide to perform the installation yourself, be sure to read the entire manual before beginning the installation.
What’s in the Box
● (1) Amplifier
● (1) Extra Fuse
● (1) Allen wrench 2.5mm
● (1) Allen wrench 3mm
● (4) #8 self-tapping black Phillips head pan head screws
● (1) Amplifier installation and operation manual
PRACTICE SAFE SOUND™
Continuous exposure to sound pressure levels over 100dB may cause permanent hearing loss. High power automotive sound systems can generate sound pressure levels in excess of 130dB. When playing your system at high levels, please use hearing protection and avoid long term exposure.
2
©2003 Directed Electronics, Inc.
WARRANTY
Directed Electronics, Inc. promises to the original purchaser, to replace this product should it prove to be defective in workmanship or material under normal use, for a period of two years from the date of purchase by the dealer as indicated by the date code marking of the product PROVIDED the product was installed by an authorized Directed dealer. During this two year period, there will be no charge for this replacement PROVIDED the unit is returned to Directed, shipping pre-paid. If the unit was installed by anyone other than an authorized Directed dealer, the warranty period will be 1 year from date of purchase by the dealer as indicated by the date code marking of the product. During this 1 year period, there will be no charge for this replacement PROVIDED the unit is returned to Directed, shipping pre-paid. This warranty is non-transferable and does not apply to any unit that has been modified or used in a manner contrary to its intended purpose, and does not cover damage to the unit caused by installation or removal of the unit. This warranty is void if the product has been damaged by accident or unreasonable use, neglect, improper service or other causes not arising out of defects in materials or construction. ALL WARRANTIES
INCLUDING BUT NOT LIMITED TO EXPRESS WARRANTY, IMPLIED WARRANTY, WAR­RANTY OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE, AND WARRANTY OF NON-INFRINGEMENT OF INTELLECTUAL PROPERTY ARE EXPRESSLY EXCLUDED TO THE MAXIMUM EXTENT ALLOWED BY LAW, AND DIRECTED NEITHER ASSUMES NOR AUTHORIZES ANY PERSON TO ASSUME FOR IT ANY LIABILITY IN CONNECTION WITH THE SALE OF THE PRODUCT. DIRECTED HAS ABSOLUTELY NO LIABILITY FOR ANY AND ALL ACTS OF THIRD PARTIES INCLUDING ITS AUTHORIZED DEALERS OR INSTALLERS.
Unit must be returned to Directed, postage pre-paid, with: consumer's name, telephone number, and address, authorized dealer's name and address, and product description. IN
ORDER FOR THIS WARRANTY TO BE VALID, YOUR UNIT MUST BE SHIPPED WITH PROOF OF INSTALLATION BY AN AUTHORIZED DIRECTED DEALER. ALL UNITS RECEIVED BY DIRECTED FOR WARRANTY REPAIR WITHOUT PROOF OF DIRECTED DEALER INSTALLATION WILL BE COVERED BY THE LIMITED 1 YEAR PARTS AND LABOR WARRANTY. BY PURCHASING THIS PRODUCT, THE CONSUMER AGREES AND CONSENTS THAT ALL DISPUTES BETWEEN THE CONSUMER AND DIRECTED SHALL BE RESOLVED IN ACCORDANCE WITH CALIFORNIA LAWS IN SAN DIEGO COUNTY, CALI­FORNIA.
NOTE: This warranty does not cover labor costs for the removal and reinstallation of the
unit.
Record Your Serial Number and Date
Model: __________________________________________________
Serial Number: __________________________________________________
Date of Purchase: __________________________________________________
Purchased from: __________________________________________________
3
©2003 Directed Electronics, Inc.
SPECIFICATIONS
1. All channels driven, continuous 4W load 20Hz to 20kHz, < 0.05% THD, with input voltage at 13.8VDC.
2. All channels driven, continuous 2W load 20Hz to 20kHz, < 0.1% THD, with input voltage at
13.8VDC.
Amplifier Section
Power Output 4W Stereo (Watts)1 100 x 4
Power Output 2W Stereo (Watts)2 200 x 4
Power Output 4W Mono (Watts)1 400 x 2
Distortion - with all channels driven < 0.1% THD+N at rated power (20Hz to 20kHz)
Frequency Response 20Hz to 20kHz ±0.25dB
Linear Bandwidth 10Hz to 50kHz ±3dB
Signal-to-Noise Ratio at Rated Power > 100dB
Damping Factor > 200
Slew Rate > 20V per usec
RCA Input Sensitivity 200mV to 5V
Input Impedance 40kW
Fuse Type (1) 80 Amp MAXI
Dimensions 23.9" x 10.5" x 2.3"
Weight 10 lbs.
Crossover Section
Low Pass Crossover 2nd Order
(12dB per octave)
Low Pass Frequency Range 20Hz to 3kHz
High Pass Filter 2nd Order
(12dB per octave)
High Pass Frequency Range 20Hz to 3kHz
INTELLi Bass 10dB boost
4
©2003 Directed Electronics, Inc.
END PANEL LAYOUT
1. Power LED - when lit indicates that the amplifier is on.
2. Front Low-Pass Crossover Switch - activates 2nd order low-pass crossover.
3. Front Low-Pass Frequency Control - adjusts the frequency of the low-pass crossover.
4. Front Gain Control - continuously adjusts from 200mV to 5V for full power output.
5. Front High-Pass Crossover Switch - activates 2nd order high-pass crossover.
6. Front High-Pass Frequency Control - adjusts the frequency of the high-pass crossover.
7. Front RCA Inputs - accepts RCA input from a source unit, preamplifier, or equalizer.
8. Rear RCA Inputs - accepts RCA input from a source unit, preamplifier, or equalizer.
9. RCA Outputs - provides easy connection to additional amplifiers.
10. Rear Gain Control - continuously adjusts from 200mV to 5V for full power output.
11. Copy/Master Switch - determines the output of the RCA outputs.
12. Rear Low-Pass Crossover Switch - activates 2nd order low-pass crossover.
13. Rear Low-Pass Frequency Control - adjusts the frequency of the low-pass crossover.
14. 4CH / 2 CH Switch - configures the amplifier for one or two sets of inputs.
15. Rear High-Pass Crossover Switch - activates 2nd order high pass crossover.
16. Rear High-Pass Frequency Control - adjusts the frequency of the high-pass crossover.
17. INTELLi Bass Control - continuously adjusts from 0 to 10dB of boost on the rear channels.
18. Speaker Connections - allow up to 12 gauge speaker wire.
19. 1 x 80A MAXI Fuse - protect the amplifier from over current situations.
20. REM Remote Turn-on Input - turns on the amplifier when fed 12 V+.
21. Power Connections - allow greater than eight-gauge power and ground cables.
5
©2003 Directed Electronics, Inc.
Loading...
+ 12 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use