How it Works
Directed Electronics
Loading...
1401
User Manual
44 pgs4.57 Mb0

Directed Electronics 1401 User Manual

Remote Start Keyless Entry
Model 1401
Owner’s Guide
© 2011 Directed Electronics, Vista, CA
G4102P 2011-03
Contents
Your warranty...........................................................................................1
Replacement remote controls ......................................................................1
System maintenance ..................................................................................2
Low battery indicator ................................................................................2
Battery replacement ..................................................................................2
Two car operation .....................................................................................3
Transmitter configuration ............................................................................5
Lock .......................................................................................................7
Unlock .....................................................................................................7
Remote Start .............................................................................................7
Aux (trunk) ...............................................................................................7
Function shift ............................................................................................7
Silent lock ................................................................................................8
Silent unlock .............................................................................................8
Runtime reset ............................................................................................8
Aux 1 ......................................................................................................8
Valet mode ..............................................................................................9
Timer mode ..............................................................................................9
Aux 2 ......................................................................................................9
Car finder ..............................................................................................10
Smart start .............................................................................................10
Aux 3 ....................................................................................................10
Rear defogger* ......................................................................................11
Aux 4 ....................................................................................................11
Locking the vehicle ..................................................................................12
Unlocking the vehicle ..............................................................................12
Valet mode ...........................................................................................13
Panic Mode ...........................................................................................13
Configuring your remote ..........................................................................14
Remote Pairing .......................................................................................15
© 2011 Directed Electronics. All rights reserved.
i
Overriding the optional Starter kill ............................................................16
Manual transmission vehicles ...................................................................18
Timer mode ............................................................................................19
Turbo timer mode* ..................................................................................20
Smart start activation ...............................................................................21
Turning on the rear defogger ....................................................................22
Pit Stop mode ........................................................................................23
Optional starter anti-grind circuitry ............................................................24
Disabling the remote start system ..............................................................24
Remote Start Safe-lock .............................................................................24
Locking ..................................................................................................25
Unlocking ..............................................................................................25
Remote start ...........................................................................................25
ii
© 2011 Directed Electronics. All rights reserved.
Government regulations
This device complies with Part 15 of FCC rules. Operation is subject to the fol­lowing two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesirable operation.
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and can radiate radio fre­quency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installa­tion. If this equipment does cause harmful interference to radio or television, which can be determined by turning the equipment Off and ON, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.
This device complies with the Industry Canada Radio Standards Specification RSS 210. Its use is authorized only on a no-interference, no-protection basis; in other words, this device must not be used if it is determined that it causes harmful interference to services authorized by IC. In addition, the user of this device must accept any radio interference that may be received, even if this interference could affect the operation of the device.
Warning:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this device.
© 2011 Directed Electronics. All rights reserved.
iii
Warning! Safety first
The following safety warnings must be observed at all times: Due to the complexity of this system, installation of this product must only be performed by an authorized Directed dealer.
When properly installed, this system can start the vehicle via a command signal from the remote control transmitter. Therefore, never operate the system in an enclosed area or partially enclosed area without ventilation (such as a garage). When parking in an enclosed or partially enclosed area or when having the vehicle serviced, the remote start system must be disabled using the installed toggle switch. It is the user’s sole responsibility to properly handle and keep out of reach from children all remote control transmitters to assure that the system does not unintentionally remote start the vehicle. THE USER MUST IN­STALL A CARBON MONOXIDE DETECTOR IN OR ABOUT THE LIVING AREA ADJACENT TO THE VEHICLE. ALL DOORS LEADING FROM ADJACENT LIVING AREAS TO THE ENCLOSED OR PARTIALLY ENCLOSED VEHICLE STORAGE AREA MUST AT ALL TIMES REMAIN CLOSED. These precautions are the sole responsibility of the user.
Remote starters on manual transmission vehicles operate differently than those with automatic transmission because you must leave your car in neutral. You must read this Owner’s Guide to familiarize yourself with the proper proce­dures regarding manual transmission remote starters. If you have any questions, ask your installer or contact Directed at 1-800-753-0600. Before remote starting a manual transmission vehicle, be sure to:
• Leave the vehicle in neutral and be sure no one is standing in front or
behind the vehicle.
• Only remote start on a flat surface
• Have the parking brake fully engaged
Warning! It is the responsibility of the owner to ensure the parking/emergency brake properly functions. Failure to do so can result in personal injury or prop­erty damage. We recommend the owner have the parking/emergency brake system inspected and adjusted by a qualified automotive shop biannually.
iv
© 2011 Directed Electronics. All rights reserved.
Use of this product in a manner contrary to its intended mode of operation may result in property damage, personal injury, or death. (1) Never remotely start the vehicle with the vehicle in gear, and (2) Never remotely start the vehicle with the keys in the ignition. The user must also have the neutral safety feature of the vehicle periodically checked, wherein the vehicle must not remotely start while the car is in gear. This testing should be performed by an authorized Directed dealer in accordance with the Safety Check outlined in the product installation guide. If the vehicle starts in gear, cease remote start operation immediately and consult with the authorized Directed dealer to fix the problem.
After the remote start module has been installed, contact your authorized dealer to have him or her test the remote start module by performing the Safety Check outlined in the product installation guide. If the vehicle starts when performing the Neutral Safety Shutdown Circuit test, the remote start unit has not been properly installed. The remote start module must be removed or the installer must properly reinstall the remote start system so that the vehicle does not start in gear. All installations must be performed by an authorized Directed dealer.
OPERATION OF THE REMOTE START MODULE IF THE VEHICLE STARTS IN GEAR IS CONTRARY TO ITS INTENDED MODE OF OPERATION. OPERAT­ING THE REMOTE START SYSTEM UNDER THESE CONDITIONS MAY RESULT IN PROPERTY DAMAGE OR PERSONAL INJURY. YOU MUST IMMEDI­ATELY CEASE THE USE OF THE UNIT AND SEEK THE ASSISTANCE OF AN AUTHORIZED Directed DEALER TO REPAIR OR DISCONNECT THE INSTALLED REMOTE START MODULE. DIRECTED WILL NOT BE HELD RESPONSIBLE OR PAY FOR INSTALLATION OR REINSTALLATION COSTS.
This product is designed for fuel injected vehicles only. Use of this product in a standard transmission vehicle must be in strict accordance with this guide.
This product should not be installed in any convertible vehicles, soft, or hard top with a manual transmission. Installation in such vehicles may pose certain risk.
© 2011 Directed Electronics. All rights reserved.
v
vi
© 2011 Directed Electronics. All rights reserved.
What’s included
• Two five-button/1-way Supercode remotes
• The control module (installed out-of-sight)
• Control Center with integrated status LED and Control button
• A remote start defeat toggle switch
• Window decals
• Your warranty registration
Important information
Congratulations on the purchase of your state-of-the-art remote start and keyless entry system. Due to the complexity of this system, it must be installed by an authorized dealer only. Installation of this product by anyone other than an au­thorized dealer voids the warranty. All dealers are provided with a preprinted dealer certificate to verify authorization.
By carefully reading this Owner’s Guide prior to using your system, you will maximize the use of this system and its features. You can print additional or replacement copies of this manual by accessing our web site at
www.directed.com.
Your warranty
Your system comes with a warranty. Please make sure you receive the war­ranty registration card and proof of purchase from your dealer indicating the product was installed by an authorized Directed dealer. Your product warranty must be validated within 10 days of purchase. You can validate it online at
www.prodregister.com/directed
tion card.
or complete and return the warranty registra-
Replacement remote controls
Your system comes with two remote controls (P/N 7153P). If additional remotes are desired, please see your authorized dealer or visit www.directedstore.com to order.
© 2011 Directed Electronics. All rights reserved.
1
System maintenance
Detail
Detail
+
+
Detail
+
+
Detail
The system requires no specific maintenance. Your remote is powered by a small coin cell lightweight 3-volt lithium battery that lasts approximately one year under normal use. The remote uses one CR2032 cell battery. When the battery begins to weaken, the operating range is reduced.
Low battery indicator
When the battery is low on the remote the vehicle system emits an additional honk when unlocking to let you know it is time to change the battery.
Note: The optional horn honk should be installed for the system to emit any additional honks during unlocking. Ask your authorized dealer if you have any questions.
Battery replacement
1. Using a small slotted screwdriver, insert into slot located as shown and carefully pry the front of the unit open until front is completely separated from housing.
2. Turn both the unit front and circuit board over, remove battery from clip and replace.
2
Note:
Verify that the bat­tery polarity is correct when replacing.
3. Reposition all parts and snap together.
© 2011 Directed Electronics. All rights reserved.
Two car operation
A U
X
A U
X
You can use the remote control system for two cars, with full command capabil­ity for both vehicles.
To change the car selection:
• Press and hold the once or twice indicating the current vehicle: One blink: Car 1 Two blinks: Car 2
button for 3 seconds until the amber LED blinks
• To scroll from one car to the other, press the
button again. After select­ing the car, operation resumes. The selected car remains selected until the setting is changed.
Note: Car 2 mode must be programmed On. See Configuring your remote.
© 2011 Directed Electronics. All rights reserved.
3
3
4
5
6
2
8
1
2
3
4
5
6

531;
,&$
)&&,'(=6'(,
%$77(5<&5
7
8
AUX
AUX
3
2
8
7
1-way remote
1
2
3
4
AUX
5
6
Feature
Description
1 Transmit indicator
2 Lock button Press for one second to lock.
3 Unlock
4 Remote start
5 Auxiliary
6 Function button Allows access to programming and modi-
button
button
button
Press for one second to unlock.
Press for one second to activate remote start.
Press and hold for 1.5 second to activate optional trunk release.
fies operation of the other buttons.
Note: If Keypad Lock is On, press
4
and then press
to unlock.
© 2011 Directed Electronics. All rights reserved.
Transmitter configuration
A U X
A U X
A U X
A U X
A U X
A U X
Basic
Advanced Commands
Commands
Level
Button
Direct Access
Function
Level 1
x 1
Function
Level 2
x 2
Lock Silent Lock
Unlock Silent Unlock Valet Mode Car Finder
Remote Start Reset Runtime Timer Mode Smart Start Rear
Trunk Release AUX 1 AUX 2 AUX 3 AUX 4
AUX
Function Shift
*
*Used to access function levels for Advanced Commands
(
with multiplier in third row implies button presses)
Function
Level 3
x 3
Function
Level 4
x 4
Defogger
© 2011 Directed Electronics. All rights reserved.
5
Control Center
Control button
LED
Antenna
The Control Center, typically located on the upper part of the front windshield sends and receives commands or messages to and from your system. It consists of:
• The In-vehicle system antenna, for 1-way communication to the system.
• The Status LED, as a visual indicator of the system’s status.
• The Control button, for placing the system into Valet Mode and to per-
form the Emergency Override operation.
6
© 2011 Directed Electronics. All rights reserved.
Loading...
+ 30 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use