Directed Audio DIRW15BL, DIRW9BL User Manual
© 2005 Directed Electronics, Inc. all rights reserved www.directed.com
1
LIMITED ONE-YEAR CONSUMER WARRANTY
This Directed Audio product is covered by a one-year limited warranty. Directed Electronics,
Inc. promises to the original purchaser, to replace this product should it prove to be defective in workmanship or material under normal use, for a period of one year from the date
of purchase from the dealer as indicated by the date code marking of the product
PROVIDED the product was installed by an authorized Directed dealer. During this one-year
period, there will be no charge for this replacement PROVIDED the unit is returned to DEI,
shipping pre-paid. If the unit is installed by anyone other than an authorized Directed
dealer, the warranty period will be one year from the date of purchase by the dealer as
indicated by the date code marking of the product. This warranty is non-transferable and
does not apply to any unit that has been modified or used in a manner contrary to its
intended purpose, and does not cover damage to the unit caused by installation or removal
of the unit. During this one-year period, there will be no charge for this replacement
PROVIDED the unit is returned to DEI, shipping pre-paid. This warranty is void if the product
has been damaged by accident or unreasonable use, neglect, improper service or other
causes not arising out of defects in materials or construction. Units which are found to be
damaged by abuse resulting in thermally damaged voice coils are not covered by this
warranty but may be replaced at the absolute/sole discretion of DEI. ALL WARRANTIES
INCLUDING BUT NOT LIMITED TO EXPRESS WARRANTY, IMPLIED WARRANTY, WARRANTY
OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE, AND WARRANTY OF NONINFRINGEMENT OF INTELLECTUAL PROPERTY ARE EXPRESSLY EXCLUDED TO THE
MAXIMUM EXTENT ALLOWED BY LAW, AND DEI NEITHER ASSUMES NOR AUTHORIZES ANY
PERSON TO ASSUME FOR IT ANY LIABILITY IN CONNECTION WITH THE SALE OF THE
PRODUCT. DEI HAS ABSOLUTELY NO LIABILITY FOR ANY AND ALL ACTS OF THIRD PARTIES
INCLUDING ITS AUTHORIZED DEALERS OR INSTALLERS. Unit must be returned to DEI,
postage pre-paid, with bill of sale or other dated proof of purchase bearing the following
information: consumer's name, telephone number, and address, authorized dealer's name
and address, and product description. Note: This warranty does not cover labor costs for
the removal and reinstallation of the unit. IN ORDER FOR THIS WARRANTY TO BE VALID,
YOUR UNIT MUST BE SHIPPED WITH PROOF OF INSTALLATION BY AN AUTHORIZED DEI
DEALER. ALL UNITS RECEIVED BY DEI FOR WARRANTY REPAIR WITHOUT PROOF OF DEI
DEALER INSTALLATION WILL BE COVERED BY THE LIMITED 1 YEAR PARTS AND LABOR
WARRANTY. Note: This warranty does not cover labor costs for the removal and reinstallation of the unit. BY PURCHASING THIS PRODUCT, THE CONSUMER AGREES AND CONSENTS
THAT ALL DISPUTES BETWEEN THE CONSUMER AND Directed SHALL BE RESOLVED IN
ACCORDANCE WITH CALIFORNIA LAWS IN SAN DIEGO COUNTY, CALIFORNIA.
installation guide
models
DIRW9BL
DIRW15BL
CONGRATULATIONS
Congratulations for purchasing the Directed LED lightbar. To ensure proper use
please carefully read this installation manual prior to installation.
Directed Electronics has been the industry leader in high-quality automotive security and audio equipment since 1990. Directed continues to set new standards of
performance, reliability, and affordability in the mobile electronics industry.
This
accessory is covered by a one-year limited warranty. Be sure to retain your orig-
inal sales receipt, and refer to the warranty section of this guide for full details about
your coverage.
To prevent fire or shock hazard, do not expose the LED lightbar to rain or moisture. Do not attempt to disassemble the LED lightbar or damage will occur.
WARNING
The LED lightbar is designed to create accent lighting for automotive interiors. Applications include amplifiers, speaker boxes, footwells, doors, and much more.
FUNCTION
N45040.45 06-05
MODEL CROSS REFERENCE CHART
Model LED Lightbar Model LED Lightbar Model LED Lightbar
A502 DIRW9BL A1004 DIRW15BL D1200 DIRW9BL
A802 DIRW9BL D600 DIRW9BL D2400 DIRW15BL
A404 DIRW9BL D800 DIRW9BL D2205 DIRW15BL
© 2005 Directed Electronics, Inc. all rights reserved www.directed.com
2
2005 model Directed Audio Amplifiers have been designed with a custom heat sink that accomodates two (optional - not supplied) LED lightbars. Use the following procedure for installation in Directed Audio Amplifiers.
1. Remove the LED tubes, find the connection points to the LED tubes and the plug which connects to the amplifier.
2. Slide each LED tube assembly into your Directed Audio Amplifier heat sink. Ensure the wire harness is on the same end of the amplifier where the plug connects to
the amplifier (signal input end). Orient the LED tube assembly so that the LEDs are facing out for optium lighting effect.
3. Connect the 4-in plug to the LED/FAN input port of the Directed Audio Amplifier.
NNOOTTEE 11::
The other RED and BLACK wire can be connected to an optional fan. The fan must not draw more than 200mA. If the optional fan is not being used, the ends
of these wires must be insulated to prevent shorting and subsequent damage to the amplifier.
NNOOTTEE 22::
The other RED and BLACK wire can also be used to drive the second tube to increase the lighting intensity. Simply cut the existing harness to separate one of
the two tubes from the pre-wired plug, and splice it to the RED and BLACK fan wires.
LED LIGHTBAR INSTALLATION
Material: Polycarbonate/Acrylic Quantity 2 Lightbars
Finish: Translucent/Clear Current Draw: Model DIRW9BL 125 mA
LEDs: Gallium Arsenide/Gallium Nitride Model DIRW15BL 250 mA
Voltage: 12 VDC
Lifetime: 100,000 hours
SPECIFICATIONS
WIRING DIAGRAM
LED Lightbar
Connector
to Amplifier
Optional
Fan (200 mA max)
Optional Cut - see note 2
Optional - connect 2nd LED tube
to fan leads - see note 2
Loading...