User’s Guide for 112” and 120”
Reel View Reference Studio Fixed Frame Screens
9cm (3 1/2”) velvet wrapped aluminum frame— 112” and 120”
Beveled frame design
120° viewing angle
HD studio grade material: White 1.0 gain, high contrast
16:9 viewing format
Perfect for home theaters, media rooms and conference rooms
Easy installation and setup
2
Dear Customer
Thank you for purchasing our Reference line of fixed frame screens. For optimum performance and safety, please read these instructions carefully before
assembling or adjusting this product. Please keep this manual for future reference.
Safety Warning
1. Safety gear and proper tools must be used. Failure to use safety gear can
result in property damage, serious injury or death
2. Assembly requires two people and open floor space greater than the size
of the screen
3. Make sure the workspace is clean and free of debris
4. Keep screen fabric away from high temperatures to avoid permanent material deformation
5. Make sure that the proper mounting anchors are used to support the
weight of the screen
6. To clean the screen, use a soft cloth with warm water to remove any
marks.
7. Never use any solutions, chemicals or abrasive cleaners
8. To avoid damage to the screen, avoid touching it with your fingers, tools
or any other sharp or abrasive objects
9. This product contains small items that could be a choking hazard if swallowed. Keep these items away from young children
Table of Contents
Section Topic Page
1.0 Reel View Screen Specifications.………………..……….. 3
2.0 Hardware List………..………………..………………………….. 4
3.0 Required Tools………………………………..………………….. 4
4.0 Installation Guide………………………………………………… 5
9
Fig 8
Once the previous steps have been completed, lift up the screen
ATTENTION: When lifting the screen off the floor, use 2 people to hold
both sides of the screen and gently tilt the screen upright
Use a level and mark the locations on the surface where the screen will
be placed
Place the screen on the wall and enjoy the movie