Direcsource 95771 User Manual

User Manual

LED LIGHT STRIP SET

95771

1.Specifications:

Working temperature:-20℃~+60℃ Supply voltage:DC12-24V Product size : L50xW35xH22mm

Package size:L106xW64xH56mm Gross weight: 101g

Output:Three CMOS drain-open output Connecting Mode:Common anode Max load current: 2A each coloe

2.Control M ethod:

Adopt wireless control method,function of each button as below:

On/off: the output switch PAUSE:Stop or star

B+: each press br ightness level+1. B-: each press brightness level-1

s+: ea ch press changing speed+1 s+: ea ch press changing speed-1.

M+:Mode up M-:mode down

Style changing table as below:

No Patter ns Remarks No Patterns Remarks

1 Static red 12 Seven-color gradual changing

2 Static green 13 Red stroboflash

3 Static blue Brightness is adjustable,Speed is 14 Green stroboflash Speed a nd

4 Static yellow unadjustable 15 Blue stroboflash Brightness

5 Static purple 16 Yellow stroboflash ar e adjustable

6 Static cyan 17 Purple stroboflash

7 Static white 18 Cycan stroboflash

8 Three-color jumpy chan ging Speed and brightn ess are 19 White stroboflash

9 Seven-color jumpy changing adjustable 20 R/B cr ossfade Speed is adjusbable

10 Th ree-color superposition Speed is adjustable,brightness is 21 B/R crossfade brightness is

11 Three-c olor gradual cha nging unadjustable 22 G/R crossfade unadjustable

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pr ovide
reason able protec tion against harmful interference in a r esiden tial install ation. This equipment generate s, uses and can radiate radio frequency energy and, if no t installed and
used in acco rdanc e with the instructions, may c ause harmful interference to radio communications. However, there is no gua rantee that interferen ce will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which ca n be determined by turning th e equipment off and on, the user
is encourage d to try to corr ect the interference by one or more of the following measures:

• Reor ient or relocate the receiving an tenna.

• Increase the separation between the equipment and receiver.

• Conn ect the equipment into an outlet on a circuit differe nt from that to wh ich the receiver is connected.

• Consult the deal er or an experienced radio/TV technic ian fo r help.

Caution: Any chan ges or modi fications to this device not ex plicitly approved by man ufacturer c ould void your authority to operate this equipment.

This device complie s with part 15 of the FCC Rules. Oper ation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device
must ac cept a ny interfer ence received, including interference that may cause undesired operation.