Diplomat ADP8352 User Manual

D I S H W A S H E R

How to get the
most from your

Fully Integrated Dishwasher

ADP 8352

DIPLOMAT

Procedure when reporting a fault

1. Give full name, address including post code, home telephone number and
business telephone number if appropriate.

2. Quote sales receipt number, make and model number of faulty appliance.

This product's reference is as follows:

ADP 8352

3. Give a summary of the problem.

GUARANTEE CONDITIONS

(a) Any claim during the period of the guarantee MUST
BE ACCOMPANIED WITH THE RECEIPT relating to the
original purchase.
(b) The unit must be correctly installed and operated in
accordance with the manufacturer's instructions and
used for normal domestic purposes.
(c) The guarantee does not cover accidental damage,
misuse or alterations which are likely to affect the units.
(d) The guarantee is invalid if the unit is tampered with,
or repaired by any unauthorised person.
(e) The guarantee in no way affects your statutory rights.
(f ) Mainland U.K only.

1812 Months Guarantee

:- issue 1, 18 July 05

LOW CALL

SERVICE

LOW CALL

SERVICE

LOW CALL

SERVICE

LOW CALL

SERVICE

LOW CALL

SERVICE

LOW CALL

SERVICE

LOW CALL

SERVICE

LOW CALL

SERVICE

LOW CALL

SERVICE

LOW CALL

SERVICE

08457 959722

Page No.

Installation
Your Dishwasher
Program Chart

Detergent and Rinse Aid Dispenser
Water Softener
Loading
Starting the Wash Program
Cancelling / Changing the Wash Program
Cleaning and Maintenance
Not Working Properly?
Technical Details
12 Month Guarantee

1 - 4
5
6
7 - 8
9
10 & 11
12
13
14 - 15
16 - 17
17
18

A Helping Hand on the Home Front

From now on washing dishes, glassware, cutlery and saucepans should be as simple as
loading your dishwasher and switching on.

We strongly recommend you take the time to read this leaflet fully from cover to
cover. It may seem like a chore, but it will pay off in the long run.

Please retain this book for future reference and if you sell the appliance please
pass this book on to the new owner.

Contents

17

Technical characteristics

45 cm
58 cm
82 - 87 cm
9 standard place settings

0.03 - 0.6 MPa
220-240V~
2150W
13A

Width
Depth
Height
Capacity
Mains water pressure
Power voltage
Total Power
Fuse Rating

This appliance is marked according to the European Directive 2002/96/EC on Waste
Electrical and Electronic Equipment (WEEE). By ensuring this product is disposed of
correctly you will help provent potential negative
consequences for the environment and human health.
The symbol on this product indicates that this product
may not be treated as household waste. Instead it
should be handed over to the applicable collection
point for recycling of electrical and electronic
equipment. Disposal must be carried out in
accordance with local enviromental regulations for
waste disposal. For more detailed information please
contact your local council household waste site or a
MFI store

Your brand new dishwasher complies with stringent EEC specifications and is fully
compatible with any 600mm deep kitchen units. If you are reasonably handy at DIY,
installing your dishwasher should be relatively straight forward as long as you stick to the
following guidelines. If you have any doubts about installing this product we suggest you
seek professional advice.

IMPORTANT: The electrical supply, water supply and drain should NOT be positioned
directly behind the appliance. When the appliance is located and fixed in position it must
be possible to switch off and disconnect both electrical and water supplies.

Connection to a Water Supply.

Your dishwasher has been specially designed to heat its own water. This means that you'll
only have to pay to heat water actually consumed by the appliance. What's more, the
dishwashing process itself is designed with economy in mind. Within each cycle, hot water
is filtered and re-circulated many times before being expelled as waste.
We recommend that your dishwasher is permanently plumbed in to the cold water supply.
To do so, connect the pipe with its 3/4" BSP female connector to a suitably threaded
tap.Always run water through the pipe before connection to remove any debris.
Ensure that there are no kinks in the tube and always fit the black rubber filter
supplied with the dishwasher at the appliance inlet connection.

Connection to Waste Pipe.

The discharge hose is at the back of your dishwasher. On no account shorten this
pipe and always ensure it hangs vertically.
Plumb the pipe into a waste outlet between 320 and 800mm above floor level. This
outlet should be at least 40mm in diameter, providing an air break, and ensuring an
efficient flow of water.
On no account seal the waste pipe as this can create a suction effect in the wrong
direction. Plumb in your dishwasher as illustrated below.

Capacity

.

Your dishwasher has a capacity of 9 full place settings. That's 9 of everything- dinner,
soup, side and dessert plates plus the accompanying cutlery and selection of
saucepans, so you shouldn't be short of space.

1

Installation

320mm (min)
800mm (max)

16

Not Working Properly cont..

If the dishwasher does not function or does not function correctly

, before calling for

assistance, please check the following:

The Dishwasher Does Not Start

Have you checked that:

- the plug is inserted into the socket correctly;

- there is power to the socket;

- the appliance is switched “ON”; (does the ON-OFF light come on)

- the door is closed properly;

- the water supply is turned on.

The Dishwasher Does Not Load Water

Have you checked that:

- the water is turned on and the hose is connected properly;

- there is water supply to the house and it has suf

ficient pressure;

- the water supply hose is not crimped or bent;

- the filter for the water supply hose is not blocked.

The Dishes Are Not Clean

Have you checked that:

- the correct amount of detergent has been used;

- the detergent is suit

able for dishwashers and is not too old;

- the appropriate wash program has been selected;

- there is sufficient salt in the salt container

- there is sufficient rinse-aid in the rinse-aid compartment;

- the spray arm nozzles are not blocked.

The Dishwasher Does Not Drain

Have you checked that:

- the drain hose is crimped or bent.

Lime Deposits or a White Film Form on the Dishes

Have you checked that:

- the lid to the salt cont

ainer is closed properly;

- the rinse aid dosage is correct.

Error Messages

The dishwasher is equipped with a safety system that is able to detect operating problems
and malfunctions.

These malfunctions are signalled by the rapid blinking of one of the
program LEDs. Only in the case where the indicator light for the soak cycle (see table for
cycles) blinks rapidly should you cancel the cycle as described in the section entitled,
'Changing a Cycle while Under-way.” Then check to make sure that there is water in the
mains and that the tap is turned on. If the message continues, call for technical assistance,
indicating which message appeared.
If any of the other indicator lights begins to blink rapidly, turn off the appliance and call for
technical assistance, indicating which light began to blink

W

ARNING: any operations performed on the appliance by

unauthorised persons may invalidate the warranty.