Diodes ZXTR2005Z User Manual
A
f
Product Line o
Diodes Incorporated
Description
The ZXTR2005Z monolithically integrates a transistor, Zener diode
and resistor to function as a high voltage linear regulator. The device
regulates with a 5V nominal output at 15mA. It is designed for use in
high voltage applications where standard linear regulators cannot be
used. This function is fully integrated into a SOT89 package,
minimizing PCB area and reducing number of components when
compared with a multi-chip discrete solution.
Applications
Supply voltage regulation in:
Networking
Telecom
Power Over Ethernet (PoE)
SOT89
Top View
Internal Device
Schematic
ZXTR2005Z
100V INPUT, 5V 30mA REGULATOR TRANSISTOR
Features
Series Linear Regulator Using Emitter-Follower Stage
Input Voltage = 10 to 100V
Output Voltage = 5V ± 10%
Fully Integrated Into a SOT89 Package
Totally Lead-Free & Fully RoHS compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Qualified to AEC-Q101 Standards for High Reliability
Mechanical Data
Case: SOT89
Case Material: Molded Plastic. “Green” Molding Compound
UL Flammability Rating 94V-0
Moisture Sensitivity: Level 1 per J-STD-020
Terminals: Finish - Matte Tin Plated Leads, Solderable per
MIL-STD-202, Method 208
Weight: 0.052 grams (approximate)
Pin Name Pin Function
VIN Input Supply
GND Power Ground
VOUT Voltage Output
Top View
Pin-Out
Ordering Information (Note 4)
Product Package Marking Reel size (inches) Tape width (mm) Quantity per reel
ZXTR2005Z-7 SOT89 1T3 7 12 1,000
ZXTR2005Z-13 SOT89 1T3 13 12 2,500
Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
4. For packaging details, go to our website at http://www.diodes.com/products/packages.html.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen and Antimony free, "Green"
and Lead-Free.
<1000ppm antimony compounds.
Marking Information
ZXTR2005Z
Document number: DS36231 Rev. 3 - 2
www.diodes.com
1T3 = Product Type Marking Code
1 of 7
December 2013
© Diodes Incorporated
A
f
Product Line o
Diodes Incorporated
Absolute Maximum Ratings (Voltage relative to GND, @T
Characteristic Symbol Value Unit
Input Voltage
Continuous Input & Output Current
Peak Pulsed Input & Output Current
Maximum Voltage applied to V
V
OUT
Maximum Current at VIN = 48V (@T
= +25°C, unless otherwise specified.)
A
Characteristic Symbol Value Unit
Continuous Output Current (Note 7)
Pulsed Output Current
(Note 8)
(Note 9) 150
Thermal Characteristics
= +25°C, unless otherwise specified.)
A
V
IN
I
IN, IOUT
I
IM, IOM
OUT(max)
I
OUT
I
OM
-0.3 to 100 V
350 mA
2 A
11 V
38 mA
740
ZXTR2005Z
mA
Characteristic Symbol Value Unit
Power Dissipation
Thermal Resistance, Junction to Ambient
(Note 5)
(Note 6) 0.89
(Note 5)
(Note 6) 112
Thermal Resistance, Junction to Lead (Note 10)
Thermal Resistance, Junction to Case (Note 10)
Recommended Operating Junction Temperature Range
Maximum Operating Junction and Storage Temperature Range
P
R
R
R
T
T
J, TSTG
D
θJA
θJL
θJC
J
1.7
59
20
15.7
-40 to +125
-65 to +150
W
°C/W
°C
°C
ESD Ratings (Note 11)
Characteristics Symbols Value Unit JEDEC Class
Electrostatic Discharge – Human Body Model ESD HBM 4,000 V 3A
Electrostatic Discharge – Machine Model ESD MM 400 V C
Notes: 5. For a device mounted with the exposed VIN pad on 50mm x 50mm 1oz copper that is on a single-sided 1.6mm FR4 PCB; device is measured under still
air conditions whilst operating in steady-state.
6. Same as note 5, except mounted on 15mm x 15mm 1oz copper.
7. Same as note 5, whilst operating at V
8. Same as note 5, except measured with a single pulse width = 100µs and V
9. Same as note 5, except measured with a single pulse width = 10ms and V
10.
11. Refer to JEDEC specification JESD22-A114 and JESD22-A115
R
= Thermal resistance from junction to solder-point (on the exposed VIN pad).
θJL
R
= Thermal resistance from junction to the top of case.
θJC
= 48V. Refer to Safe Operating Area for other Input Voltages.
IN
IN
= 48V.
IN
= 48V.
.
ZXTR2005Z
Document number: DS36231 Rev. 3 - 2
2 of 7
www.diodes.com
December 2013
© Diodes Incorporated
A
f
Product Line o
Diodes Incorporated
Thermal Characteristics and Derating Information
2.5
T
J
2.0
1.5
= 125°C
= 150°C
50mm x 50mm
1oz Cu
1.0
0.5
15mm x 15mm
0.0
Max Power Dissipation (W)
0 25 50 75 100 125 150
1oz Cu
Ambient temperature (°C)
Derating Curve
60
50mm x 50mm
50
40
30
20
1oz Cu
D=0.5
D=0.2
Single Pulse
D=0.05
10
D=0.1
0
Thermal Resistance (°C/W)
100µ 1m 10m 100m 1 10 100 1k 10k
Pulse Width (s)
Transient Thermal Impedance
ZXTR2005Z
Steady state D.C.
= 25°C
T
A
T
125°C
J
100
15mm x 15mm
1oz Cu
50mm x 50mm
1oz Cu
10
10 20 30 40 50 60 70 80 90 100
Continuous Output Current (mA)
Input Voltage (V)
Safe Operating Area
50
Single Pulse
= 25°C
T
A
125°C
T
J
10
1
Max Power Dissipation (W)
50mm x 50mm
1oz Cu
100µ 1m 10m 100m 1 10 100 1k
Pulse Width (s)
Pulse Power Dissipation
120
100
80
15mm x 15mm
1oz Cu
D=0.5
50
10
Single Puls e
= 25°C
T
A
125°C
T
J
15mm x 15mm
1oz Cu
60
40
20
D=0.2
D=0.1
Single Pulse
D=0.05
0
Thermal Resistance (°C/W)
100µ 1m 10m 100m 1 10 100 1k 10k
Pulse Width (s)
Transient Thermal Impedance
1
0.1
Max Power Dissipation (W)
100µ 1m 10m 100m 1 10 100 1k
Pulse Width (s)
Pulse Power Dissipation
ZXTR2005Z
Document number: DS36231 Rev. 3 - 2
3 of 7
www.diodes.com
December 2013
© Diodes Incorporated
Loading...