Diodes ZXTR1005PD8 User Manual

A

f

Diodes Incorporated

ZXTR1005PD8

100V INPUT, 5V 50mA VOLTAGE REGULATOR

Product Line o

Description

The ZXTR1005PD8 is a high voltage regulator with fixed output

voltage of 5V ± 2% and a 50mA drive capability. It is designed for use

in high voltage applications where standard linear regulators cannot

be used. This function is fully integrated into a PowerDI5060 package,

minimizing PCB area and reducing number of components when

compared with a multi-chip discrete solution.

The device also features an enable pin which disables the regulator

when pulled low.

Applications

Supply voltage regulation in:

• Networking

• Telecom

• Power Over Ethernet (PoE)

Internal Device

Schematic

PowerDI5060-8 Type B

Top View

Bottom View

Features

• Series Linear Regulator Using Emitter-Follower Stage

• Input Voltage = 10 to 100V

• Output Voltage = 5V ± 2%

• ± 4% tolerance over -55 to +125°C

• Output Current up to 50mA

• Toggle Output On/Off with Enable pin

• Totally Lead-Free & Fully RoHS compliant (Notes 1 & 2)

• Halogen and Antimony Free. “Green” Device (Note 3)

Mechanical Data

• Case: PowerDI5060-8 Type B

• Case material: Molded Plastic. “Green” Molding Compound.

• UL Flammability Rating 94V-0

• Moisture Sensitivity: Level 1 per J-STD-020

• Terminals: Finish - Matte Tin Plated Leads, Solderable per MIL-

STD-202, Method 208

• Weight: 0.104 grams (approximate)

Bottom View

Pin-Out

Name

VIN GND Power Ground V

OUT

EN Enable

N/C Not Connected

Function

Input Supply

Voltage Output

Ordering Information (Note 4)

Product Package Marking Reel Size (inches) Tape Width (mm) Quantity per Reel

ZXTR1005PD8-13 PowerDI5060-8 Type B ZXTR 1005 13 12 2,500

Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.

3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and

4. For packaging details, go to our website at http://www.diodes.com/products/packages.html.

2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen and Antimony free, "Green" and Lead-Free.

<1000ppm antimony compounds.

Marking Information

ZXTR

1005

YYWW

ZXTR1005PD8

Datasheet Number: DS36316 Rev. 1 - 2

ZXTR1005 = Product Type Marking Code YYWW = Date Code Marking YY = Year (ex: 13 = 2013) WW = Week (01-52)

1 of 8

www.diodes.com

January 2014

A

f

Product Line o

Diodes Incorporated

ZXTR1005PD8

Absolute Maximum Ratings (Voltage relative to GND, @ T

= +25°C, unless otherwise specified.)

A

Characteristic Symbol Value Unit

Input voltage VIN -0.3 to +100 V

Enable current IEN ±1 mA

Continuous Input & Output Current IIN, I

100 mA

OUT

Peak Pulsed Input & Output Current IIM, IOM 100 mA

Maximum Voltage applied to V

V

OUT

10 V

OUT(max)

Maximum Current (@ V

= 48V, TA = +25°C, unless otherwise specified.)

IN

Characteristic Symbol Value Unit

Continuous Output Current (Note 7)

Pulsed Output Current

(Note 8)

(Note 9) 100

I

OUT

OM

42 mA

100

mA

Thermal Characteristics (@T

= +25°C, unless otherwise specified.)

A

Characteristic Symbol Value Unit

Power Dissipation

Thermal Resistance, Junction to Ambient

(Note 5)

(Note 6) 0.94

(Note 5)

(Note 6) 106.4

Thermal Resistance, Junction to Lead (Note 10)

Thermal Resistance, Junction to Case (Note 10)

Maximum Operating Junction Temperature Range

Storage Temperature Range

R

T

P

θJA

θJL

θJC

T

STG

D

J

1.84

54.3

13

13.9

-55 to +125

-65 to +150

W

°C/W

°C

ESD Ratings (Note 11)

Characteristics Symbols Value Unit JEDEC Class

Electrostatic Discharge – Human Body Model ESD HBM 4,000 V 3A

Electrostatic Discharge – Machine Model ESD MM 400 V C

Notes: 5. For a device mounted with the exposed VIN pad on 50mm x 50mm 1oz copper that is on a single-sided 1.6mm FR4 PCB; device is

ZXTR1005PD8

Datasheet Number: DS36316 Rev. 1 - 2

measured under still air conditions whilst operating in steady-state.

6. Same as note 5, except mounted on 15mm x 15mm 1oz copper.

7. Same as note 5, whilst operating at V

8. Same as note 5, except measured with a single pulse width = 100µs and V

9. Same as note 5, except measured with a single pulse width = 10ms and V = Thermal resistance from junction to solder-point (on the exposed V

10. R

Θ

JL

R

= Thermal resistance from junction to the top of case.

Θ

JC

11. Refer to JEDEC specification JESD22-A114 and JESD22-A115

= 48V this is thermally limited. Refer to Safe Operating Area for other Input Voltages.

IN

www.diodes.com

= 48V. This is limited by the absolute maximum IOM rating.

IN

= 48V. This is limited by the absolute maximum IOM rating.

IN

pad).

IN

.

2 of 8

January 2014

A

f

Thermal Characteristics and Derating Information

2.0

50 mm x 5 0mm

1.5

1.0

1oz Cu

15mm x 15mm

1oz Cu

0.5

0.0 0 25 50 75 100 125 150

Max Power Dissipation (W)

Ambient Temperature (°C)

Continuous Output Current (mA)

Derating Curve

Product Line o

Diodes Incorporated

ZXTR1005PD8

100

80

15mm x 15mm

1oz Cu

50 mm x 5 0mm

1oz Cu

60

40

20

0

10 20 30 40 50 60 70 80 90 100

Steady state D.C. T

= 25°C

A

Input Voltage (V)

Safe Operating Area

60

50mm x 50mm

50

1oz Cu

40

D=0.5

30

D=0.2

20

10

0

100µ 1m 10m 100m 1 10 100 1k 10k

Thermal Resistance (°C/W)

D=0.1

Single Pulse

D=0.05

Pulse Width (s)

Transient Thermal Impedance

100

Single Pulse

TA=25°C

50 mm x 5 0mm

1oz Cu

10

1

100µ 1m 10m 100m 1 10 100 1k

Max Power Dissipation (W)

Pulse Width (s)

Pulse Power Dissipation

ZXTR1005PD8

Datasheet Number: DS36316 Rev. 1 - 2

3 of 8

www.diodes.com

January 2014

A

f

Electrical Characteristics (Voltage relative to GND, @T

= +25°C, unless otherwise specified.)

A

Enable Output with EN =OPEN (i.e. -100nA < IEN < 100nA)

Characteristic Symbol Min Typ Max Unit Test Condition

Output Voltage (Note 12)

Line Regulation (Note 12 & 13)

Average Temperature Coefficient

Load Regulation (Note 12 & 14)

Minimum Value of Input Voltage Required to Maintain Line Regulation

Power Supply Rejection Ratio

ΔV

∆V

V

∆V

V

IN

OUT

/∆T

OUT

IN(MIN)

/ΔV

4.9 5.0 5.1 V

-10 2 10 mV

— 0.44 0.7 mV/°C

— 20 50 mV

10 — — V —

OUT

— 57 — dB

Toggle Output On/Off

Enable Output

Disable Output

Quiescent Current (Note 12) with Enable Output

Quiescent Current (Note 12) with Disable Output

Notes: 12. Measured under pulsed conditions. Pulse width ≤ 300μs. Duty cycle ≤ 2%.

14. Load regulation ΔV

13. Line regulation ΔV

OUT

= V

OUT

(@ V

(@ I

V

= 100V) – V

IN

= 50mA) – V

OUT

I

Q

I

Q

4.9 5.0 5.1 V

— 0 1 V

—

(@ VIN = 10V)

OUT

(@ I

OUT

300 650

= 0mA)

500 900

Product Line o

Diodes Incorporated

V

= 48V, I

IN

V

= 10 to 100V, I

IN

T

= -55°C to +125°C

J

= 48V, I

V

IN

I

= 0.1 to 50mA, V

OUT

C

= 100nF, I

OUT

= 5V, VIN = 10 to 100V,f = 100Hz

V

OUT

EN = OPEN, -100nA < I V

= 48V, I

IN

EN = GND, -0.3V < V

= 48V, I

V

IN

EN = OPEN, V

µA

EN = OPEN, V

EN = GND, V

µA

EN = GND, V

= 15mA

OUT

= 15mA

OUT

= 15mA

OUT

= 100nA

OUT

IN

= 48V

IN

= 100V

IN

OUT

ZXTR1005PD8

= 15mA

OUT

= 48V

IN

= 15mA,

<100nA,

EN

< 1V,

EN

= 48V = 100V

Pin Functions

Pin Name Pin Function Notes

VIN

Input Supply

GND Power Ground This pin should be tied to the system ground.

V

OUT

Voltage Output

EN Enable Output

To maintain output regulation the input voltage can vary from 10V to 100V with respect to the GND pin. It is recommended to connect a 1µF capacitor to GND.

Outputs a regulated 5V when drawing between 0.1 to 50mA current. It is recommended to connect a ≥100nF capacitor to GND to minimize the noise on the regulated output. The pin can be pulled high to a maximum of 10V with respect to ground.

Output Always On

When the output state is required to be permanently on, then the EN pin should be left floating in an OPEN state.

Toggle Output On/Off

Toggle the regulator’s output state between on (5V) and off (0V).

Enable Output

Leave the EN pin floating in an OPEN state.

Disable Output

Pull the EN pin to GND in a SHORT state.

For example, see the Typical Application Circuit showing a transistor toggling the EN pin.

EN pin = Do not connect

Enable Output

EN pin = -100nA < I

<100nA

EN

Disable Output

EN pin = -0.3V < V

EN

< 1V

ZXTR1005PD8

Datasheet Number: DS36316 Rev. 1 - 2

4 of 8

www.diodes.com

January 2014

A

f

Typical Application Circuit

Product Line o

Diodes Incorporated

ZXTR1005PD8

Datasheet Number: DS36316 Rev. 1 - 2

5 of 8

www.diodes.com

January 2014

A

f

Typical Electrical Characteristics (@T

80

70

V

OUT

60

50

40

Vin =18 to 48V

Slew Rate=5V/uS C

= 1uF

OUT

I

= 15mA

OUT

30

Input Voltage (V)

20

in

V

10

-5.0µ 0.0 5.0µ 10.0µ 15.0µ 20.0µ

Time

Line transient response

20

I

= 15mA

0

OUT

= +25°C, unless otherwise specified.)

A

5.4

5.2

5.0

5.2

V

5.0

4.8

4.6

4.4

4.2

4.0

3.8

3.6

4.8

I

4.6

4.4

Output Voltage (V)

OUT

V

4.2

OUT

-200.0µ 0.0 200.0µ 400.0µ 600.0µ 800.0µ

Load transient response

20

0

Product Line o

Diodes Incorporated

OUT

I

OUT

Slew Rate=1A/uS C

Vin =18V

Time

ZXTR1005PD8

100

80

60

= 0 to 50mA

= 1uF

OUT

VIN = 48V

40

20

0

Output Current (mA)

OUT

I

-20

TJ = -55°C

-40

TJ = 100°C

10 20 30 40 50 60 70 80 90 100

V

Output Voltage (V)

IN

Output Voltage (mV)

OUT

ΔV

-60

-80

-100

TJ = 25°C

TJ = 85°C

TJ =125°C

-20

-40

-60

-80

Output Voltage (mV)

OUT

-100

ΔV

.1 10 20 30 40 50

Line Regulation (Note 15)

20

0

-20

-40

-60

VIN = 48V

-80

Output Voltage (mV)

OUT

ΔV

I

= 15mA

OUT

-100

-50 -25 0 25 50 75 100 125

Junction temperature (°C)

900

600

300

0

Quiescent Current (μA)

Q

I

10 20 30 40 50 60 70 80 90 100

Temperature Coefficient (Note 17)

Notes: 15. Line regulation ∆V

16. Load regulation ∆V

17. Temperature Coefficient ∆V

OUT

= V

OUT

– V

= V

(@ VIN = 10V, I

OUT

(@ VIN = 48V, I

OUT

– V

OUT

(@ VIN = 48V, I

OUT

= 15mA, TJ = +25°C)

OUT

= 0A, TJ = +25°C)

OUT

= 30mA, TJ = +25°C)

OUT

TJ = 25°C

TJ = 100°C

TJ = 85°C

TJ = 125°C

I

Current (mA)

OUT

Load Regulation (Note 16)

I

OUT

= 0mA

TJ = 100°C

TJ = -55°C

VIN Input Voltage (V)

TJ = 125°C

TJ = 85°C

TJ = 25°C

Quiescent Current

TJ = -55°C

ZXTR1005PD8

Datasheet Number: DS36316 Rev. 1 - 2

6 of 8

www.diodes.com

January 2014

A

f

Package Outline Dimensions

Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version.

1.900

D

1

1.400

E

1

Ø1.000 Depth 0.07±0.030

A

b

︵8

X

L

E

2

K

G

c

︶

1

e/2

K

b

2︵4

X

D

2

E

3

e

M

1

θ (4X)

︶

L

1

A

1

DETAIL

A

θ1 (4

X

)

Suggested Pad Layout

Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version.

X

Y

1

Y

3

6

Y

4

1

Y

2

Y

5

Y

︵5

x

︶

C

X

Product Line o

Diodes Incorporated

ZXTR1005PD8

POWERDI®5060-8

TYPE B

Dim Min Max Typ

A 0.90 1.10 1.00

A1 0.00 0.05 —

b 0.33 0.51 0.41

b2 0.20 0.40 0.273

c 0.230 0.330 0.273

D 5.15 BSC D1 4.70 5.10 4.90 D2 3.50 4.40 3.90

E 6.15 BSC E1 5.60 6.00 5.80 E2 2.25 2.65 2.45 E3 0.595 0.995 0.795

e 1.27 BSC

G 0.51 0.71 0.61

K 0.51 — — K1 0.51 — —

L 0.51 0.71 0.61 L1 0.05 0.20 0.175

M 3.235 4.035 3.635

M1 1.00 1.40 1.21

θ1 10° 12° 11° θ2 6° 8° 7°

All Dimensions in mm

Dimensions Value (in mm)

C 1.270 X 0.610

X1 4.420

Y 0.910 Y1 0.910 Y2 0.895 Y3 2.130 Y4 0.585 Y5 2.550 Y6 6.550

ZXTR1005PD8

Datasheet Number: DS36316 Rev. 1 - 2

7 of 8

www.diodes.com

January 2014

A

f

Product Line o

Diodes Incorporated

ZXTR1005PD8

DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).

Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages.

Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.

Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks.

Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:

A. Life support devices or systems are devices or systems which:

1. are intended to implant into the body, or

2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the

labeling can be reasonably expected to result in significant injury to the user.

B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness.

Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.

www.diodes.com

IMPORTANT NOTICE

LIFE SUPPORT

ZXTR1005PD8

Datasheet Number: DS36316 Rev. 1 - 2

8 of 8

www.diodes.com

January 2014