Diodes ZXTP2014G User Manual

A
f
y
B
Product Line o
Green
Diodes Incorporated
140V PNP SILICON PLANAR MEDIUM POWER TRANSISTOR IN SOT223
Features
BV
I
I
Low saturation voltage V
R
h
Lead-Free Finish; RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Qualified to AEC-Q101 Standards for High Reliability
> -140V
CEO
= -4A high Continuous Collector Current
C
= -10A Peak Pulse Current
CM
= 92m for a low equivalent On-Resistance
SAT
specified up to -10A for a high gain hold up
FE
< -120mV @ IC = -1A
CE(sat)
Mechanical Data
Case: SOT223
Case material: molded plastic. “Green” molding compound.
UL Flammability Rating 94V-0
Moisture Sensitivity: Level 1 per J-STD-020
Terminals: Finish - Matte Tin Plated Leads, Solderable per
MIL-STD-202, Method 208
Weight: 0.112 grams (approximate)
Application
Motor driving
Line switching
High side switches
Subscriber line interface cards (SLIC)
SOT223
Top View
Device S
C
E
mbol
Top View
Pin-Out
Ordering Information (Note 4)
Product Marking Reel size (inches) Tape width (mm) Quantity per reel
ZXTP2014GTA ZXTP2014 7 12 1,000 ZXTP2014GTC ZXTP2014 13 12 4,000
Notes: 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied.
2. See http://www.diodes.com for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds.
4. For packaging details, go to our website at http://www.diodes.com.
Marking Information
ZXTP2014G
tasheet Number: DS33716 Rev. 2 - 2
Da
ZXTP
2014
ZXTP2014 = Product Type Marking Code
1 of 7
www.diodes.com
November 2012
© Diodes Incorporated
A
f
Product Line o
Diodes Incorporated
Maximum Ratings (@T
= +25°C, unless otherwise specified.)
A
Characteristic Symbol Value Unit
Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Continuous Collector Current Peak Pulse Current
Thermal Characteristics (@T
= +25°C, unless otherwise specified.)
A
Characteristic Symbol Value Unit
Power Dissipation (Note 5) Linear derating factor
Power Dissipation (Note 6) Linear derating factor
Thermal Resistance, Junction to Ambient (Note 5) Thermal Resistance, Junction to Ambient (Note 6) Thermal Resistance Junction to Lead (Note 7) Operating and Storage Temperature Range
ESD Ratings (Note 8)
V V V
I
R R R
T
J,TSTG
CBO CEO EBO
I
C
CM
P
D
P
D
JAJAJL
-180 V
-140 V
-7 V
-4 A
-10 A
3.0 24
1.6
12.8 42 78
10.48
-55 to +150
W
mW/°C
W
mW/°C
°C/W °C/W °C/W
°C
Electrostatic Discharge - Human Body Model ESD HBM 8,000 V 3B
Characteristic Symbol Value Unit JEDEC Class
Electrostatic Discharge - Machine Model ESD MM 400 V C
Notes: 5. For a device surface mounted on 52mm x 52mm x 1.6mm FR4 PCB with high coverage of single sided 2oz copper, in still air conditions; the device is
6. Same as note (5), except the device is surface mounted on 25mm x 25mm with 1oz copper.
measured when operating in a steady-state condition.
7. Thermal resistance from junction to solder-point (at the end of the collector lead).
8. Refer to JEDEC specification JESD22-A114 and JESD22-A115.
ZXTP2014G
tasheet Number: DS33716 Rev. 2 - 2
Da
2 of 7
www.diodes.com
November 2012
© Diodes Incorporated
A
f
Thermal Characteristics and Derating Information
Product Line o
Diodes Incorporated
V
CE(sat)
10
Limit
1
DC
1s
100m
100ms
Single Pulse. T
Collector Cu rren t (A)
C
10m
-I
100m 1 10 100
52mmX52mm
single sided 2oz Cu
amb
10ms
=25°C
1ms
100µs
-VCE Collector-Emitte r Vo ltage ( V)
Safe Operating Area
52mm X52mm
40
single sided 2oz Cu
30
D=0.5
20
D=0.2
10
0
100µ 1m 10m 100m 1 10 100 1k
Thermal Resistance (°C/W)
Pulse Width (s)
Single Pulse
D=0.05
D=0.1
Transient Thermal Impedance
3.0
2.5
52mm X52mm single sided 2oz Cu
2.0
1.5
1.0
25mm X25mm
0.5
single sided 1oz Cu
0.0 0 20 40 60 80 100 120 140 160
Max Powe r D i ssipation (W )
Temperature (°C)
Derating Curve
Single Pulse. T
100
52mmX52mm
single sided 2oz Cu
10
1
100µ 1m 10m 100m 1 10 100 1k
Max Power Dissipation (W)
Pul se Width (s)
amb
Pulse Power Dissipation
=25°C
ZXTP2014G
tasheet Number: DS33716 Rev. 2 - 2
Da
3 of 7
www.diodes.com
November 2012
© Diodes Incorporated
Loading...
+ 4 hidden pages