Diodes ZXTP2012Z User Manual

A

f

B

Product Line o



Green

Diodes Incorporated

ZXTP2012Z

60V PNP LOW SATURATION MEDIUM POWER TRANSISTOR IN SOT89

Features

• BV

• I

• R

• Low saturation voltage V

• h

• Complementary NPN type: ZXTN2010Z

• Lead-Free Finish; RoHS compliant (Notes 1 & 2)

• Halogen and Antimony Free. “Green” Device (Note 3)

• Qualified to AEC-Q101 Standards for High Reliability

• PPAP capable (Note 4)

> -60V

CEO

= -4.3A high continuous current

C

= 32mΩ for a low equivalent On-Resistance

SAT

specified up to -10A for high current gain hold up

FE

< -65mV @ IC = -1A

CE(sat)

Mechanical Data

• Case: SOT89

• Case material: molded plastic. “Green” molding compound.

• UL Flammability Rating 94V-0

• Moisture Sensitivity: Level 1 per J-STD-020

• Terminals: Finish - Matte Tin Plated Leads, Solderable per

MIL-STD-202, Method 208

• Weight: 0.05 grams (Approximate)

Application

• Emergency lighting circuits

• Motor driving (including DC fans)

• Backlight inverters

• Power switches

• Gate driving MOSFETs and IGBTs

SOT89

Top View

C

E

Device Symbol

C

E

C

B

Top View

Pin Out

Ordering Information (Note 4 & 5)

Product Compliance Marking Reel size (inches) Tape width (mm) Quantity per reel

ZXTP2012ZTA AEC-Q101 951 7 12 1,000
ZXTP2012Z-13R AEC-Q101 951 13 12 4,000
ZXTP2012ZQTA Automotive 951 7 12 1,000

Notes: 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied.

2. See http://www.diodes.com for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free.

3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.

4. Automotive products are AEC-Q101 qualified and are PPAP capable. Automotive, AEC-Q101 and standard products are electrically and thermally
the same, except where specified.

5. For packaging details, go to our website at http://www.diodes.com

Marking Information

ZXTP2012Z

tasheet Number: DS33713 Rev. 3 - 2

Da

951

951 = Product Type Marking Code

1 of 7

www.diodes.com

October 2012

© Diodes Incorporated

A

f

Product Line o

Diodes Incorporated

ZXTP2012Z

Maximum Ratings (@T

= +25°C, unless otherwise specified.)

A

Characteristic Symbol Value Unit

Collector-Base Voltage
Collector-Emitter Voltage
Emitter-Base Voltage
Continuous Collector Current
Peak Pulse Current

V

CBO

V

CEO

V

EBO

I

C

I

CM

-100 V

-60 V

-7 V

-4.3 A

-15 A

Thermal Characteristics (@T

= +25°C, unless otherwise specified.)

A

Characteristic Symbol Value Unit

R
R
R

T

J,TSTG

P

P

θJA
θJA
θJL

D

D

1.5
12

2.1

16.8
83
60

3.23

-55 to +150

mW/°C

mW/°C

Power Dissipation (Note 6)
Linear derating factor

Power Dissipation (Note 7)
Linear derating factor

Thermal Resistance, Junction to Ambient (Note 6)
Thermal Resistance, Junction to Ambient (Note 7)
Thermal Resistance, Junction to Leads (Note 8)
Operating and Storage Temperature Range

Notes: 6. For a device surface mounted on 25mm x 25mm x 1.6mm FR4 PCB with high coverage of single sided 1oz copper, in still air conditions; device

measured when operating in steady state condition.

7. Same as note (6), except the device is mounted on 50mm X 50mm single sided 1oz weight copper.

8. Thermal resistance from junction to solder-point (on the exposed collector pad).

W

W

°C/W
°C/W
°C/W

°C

ZXTP2012Z

tasheet Number: DS33713 Rev. 3 - 2

Da

2 of 7

www.diodes.com

October 2012

© Diodes Incorporated

A

f

Thermal Characteristics and Derating Information

V

CE(sat)

10

Limit

DC

1

1s

100ms

100m

Single Pulse . T

Collector Current (A)

C

-I

10m

25X25mm PCB 1oz copper

100m 1 10 100

amb

=25°C

10ms

1ms

100µs

-VCE Collector -Emitter Voltag e (V)

Safe Operating Area

Product Line o

Diodes Incorporated

ZXTP2012Z

2.0

50X50mm PCB

1.5

1oz copper

1.0

25X25mm PCB

1oz copper

0.5

0.0
0 20 40 60 80 100 120 140 160

Max Power Dissipation (W)

Temperature (°C)

Derating Curve

80

25X25mm PCB 1oz copper)

100

60

D=0.5

Sin gle Pulse . T

25X25mm PCB 1oz copper

amb

=25°C

40

10

D=0.2

Single Pulse

20

D=0.05

0

100µ 1m 10m 100m 1 10 100 1k

Thermal Resistance (°C/W)

Puls e Width (s )

Transient Thermal Impedance

D=0.1

1

100µ 1m 10m 100m 1 10 100 1k

Max Power Dissipation (W)

Pulse Width (s )

Pulse Power Dissipation

ZXTP2012Z

tasheet Number: DS33713 Rev. 3 - 2

Da

3 of 7

www.diodes.com

October 2012

© Diodes Incorporated