Diodes ZX5T1951G User Manual

Page 1
f
y
Ou
Features and Benefits
BV
I
Low Saturation Voltage (-95mV max @ -1A)
R
h
RoHS Compliant
Halogen and Antimony Free. "Green" Device (Note 1)
Qualified to AEC-Q101 Standards for High Reliability
> -60V
CEO
= -6A Continuous Collector Current
C
= 40m for a low equivalent On-Resistance
SAT
specified up to -10A for a high gain hold up
FE
Applications
Motor driving
DC-DC modules
Backlight inverters
Actuator, relay, and solenoid drivers
SOT223
B
Top View
Device S
Product Line o
Green
Diodes Incorporated
ZX5T1951G
60V PNP MEDIUM POWER TRANSISTOR IN SOT223
Mechanical Data
Case: SOT223
Case Material: Molded Plastic, "Green" Molding Compound.
UL Flammability Rating 94V-0
Moisture Sensitivity: Level 1 per J-STD-020
Terminals: Matte Tin Finish annealed over Copper Leadframe
Weight: 0.112 grams (Approximate)
C
E
mbol
Top View
Pin-
t
Ordering Information (Note 2)
Product Marking Reel size (inches) Tape width (mm) Quantity per reel
ZX5T1951GTA ZX5T1951 7 12 1,000
Notes: 1. Diodes Inc’s “Green” Policy can be found on our website at http://www.diodes.com
2. For Packaging Details, go to our website at http://www.diodes.com.
Marking Information
ZX5T1951G
Datasheet Number: DS35304 Rev. 4 - 2
ZX5T 1951
www.diodes.com
ZX5T1951 = Product type Marking Code
1 of 7
April 2011
© Diodes Incorporated
Page 2
f
θ
θ
θ
Maximum Ratings @T
= 25°C unless otherwise specified
A
Characteristic Symbol Value Unit
Collector-Base Voltage Collector-Emitter Voltage Collector-Emitter Voltage Emitter-Base Voltage Continuous Collector Current (Note 3) Peak Pulse Current Base Current
V
CBO
V
CES
V
CEO
V
EBO
I
C
I
CM
I
B
Thermal Characteristics @T
= 25°C unless otherwise specified
A
Characteristic Symbol Value Unit
Power Dissipation Linear derating factor
Thermal Resistance, Junction to Ambient Thermal Resistance Junction to Lead (Note 5)
Operating and Storage Temperature Range
Notes: 3. For a device surface mounted on 52mm x 52mm x 1.6mm FR4 PCB with high coverage of single sided 2oz copper, in still air conditions; the device is
measured when operating in a steady-state condition.
4. Same as note (3), except the device is surface mounted on 25mm x 25mm with 1oz copper.
5. Thermal resistance from junction to solder-point (at the end of the collector lead).
(Note 3) (Note 4)
(Note 3) (Note 4)
P
R R R
T
J, TSTG
D
JA JA
JL
ZX5T1951G
Datasheet Number: DS35304 Rev. 4 - 2
2 of 7
www.diodes.com
Diodes Incorporated
-90 V
-90 V
-60 V
-7 V
-6 A
-15 A
-1 A
3.0 24
1.6
12.8 42 78
12.3
-55 to +150
ZX5T1951G
W
mWC
°C/W
°C
April 2011
© Diodes Incorporated
Product Line o
Page 3
f
Thermal Characteristics
V
CE(sat)
10
Limit
DC
1
1s
100ms
100m
Collector Current (A )
-I
Single Pulse. T
C
10m
52x52x1.6(mm) borad
100m 1 10 100
-VCE Collector-Emitter Voltage (V)
Safe Operating Area
amb
10ms
=25°C
1ms
100µs
Product Line o
Diodes Incorporated
3.0
2.5
2.0
1.5
1.0
0.5
Mounted on 25x25x1.6(mm) FR4 PCB 2oz coppor
0.0 0 20 40 60 80 100 120 140 160
Max Power Dissipati o n (W)
Temperature (°C)
Mounted on 52x52x1.6(mm) FR4 PCB 2oz coppor
Derating Curve
ZX5T1951G
Mounted on 52x52x1.6(mm)
40
FR4 PCB 2oz coppor
30
D=0.5
20
D=0.2
10
0
100µ 1m 10m 100m 1 10 100 1k
Thermal Resistance (°C/W)
Transient Thermal Impedance
ZX5T1951G
Datasheet Number: DS35304 Rev. 4 - 2
)
D=0.1
Pulse Width (s)
Single Pulse
D=0.05
100
10
1
100µ 1m 10m 100m 1 10 100 1k
Max Power Dissipation (W)
3 of 7
www.diodes.com
Pulse Width (s)
Pulse P ower Dis s ipatio n
Single Pulse. T
52x 52x 1 .6(mm) bora d
=25°C
amb
© Diodes Incorporated
April 2011
Page 4
f
)
)
Electrical Characteristics @T
= 25°C unless otherwise specified
A
Characteristic Symbol Min Typ Max Unit Test Condition
Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage Collector-Emitter Breakdown Voltage (Note 6) Emitter-Base Breakdown Voltage Collector-Base Cutoff Current Collector-Emitter Cutoff Current Emitter Cutoff Current
BV BV BV BV
I
CBO
I
CES
I
EBO
CBO CES CEO EBO
-90 -120 - V
-90 -120 - V
-60 -80 - V
-7 -8 - V
- <1 -50 nA
- <1 -50 nA
- <1 -10 nA
100 240 -
Static Forward Current Transfer Ratio (Note 6)
h
FE
100 180 300
40 70 -
5 14 -
- -16 -30
Collector-Emitter Saturation Voltage (Note 6)
V
CE(sat)
- -55 -95
- -85 -130
- -200 -260 Base-Emitter Saturation Voltage (Note 6) Base-Emitter Turn-On Voltage (Note 6) Output Capacitance (Note 6)
Transition Frequency
Switching Time
Notes: 6. Measured under pulsed conditions. Pulse width 300µs. Duty cycle 2%
V
V
BE(sat
BE(on
C
obo
f
T
t
on
t
off
- -1 -1.15 V
- -0.89 -1.0 V
- 33 70 pF
- 120 - MHz
- 33 80
- 215 300
ZX5T1951G
Datasheet Number: DS35304 Rev. 4 - 2
4 of 7
www.diodes.com
Diodes Incorporated
IC = -100µA IC = -100µA IC = -10mA IE = -100µA V
= -72V
CB
V
= -72V
CB
V
= -6V
EB
= -10mA, VCE = -2V
I
C
I
= -2A, VCE = -2V
C
­I
= -5A, VCE = -2V
C
I
= -10A, VCE = -2V
C
= -100mA, IB = -10mA
I
C
I
= -1A, IB = -100mA
mV
C
I
= -2A, IB = -200mA
C
I
= -5A, IB = -500mA
C
IC = -5A, IB = -500mV IC = -5A, V VCB = -10V. f = 1MHz V
= -10V, IC = -100mA
CE
f = 50MHz
= -10V, IC = -2A
V
ns
CC
I
= -IB2 = -200mA
B1
ZX5T1951G
= -2V
CE
April 2011
© Diodes Incorporated
Product Line o
Page 5
f
Typical Electrical Characteristics
1
Tamb=25°C
100m
(V)
CE(S AT)
- V
10m
1m 10m 100m 1 10
- IC Collector Current (A)
IC/IB=20
V
CE(SAT)
IC/IB=100
IC/IB=50
v I
C
IC/IB=10
Product Line o
Diodes Incorporated
1.0
IC/IB=10
0.8
0.6
(V)
0.4
CE(S AT)
- V
0.2
0.0 100m 1 10
100°C
25°C
-55°C
- IC Collector Current (A)
V
CE(SAT)
v I
C
ZX5T1951G
1.4
100°C
1.2
1.0
25°C
0.8
0.6
Normalised Gain
0.4
0.2
0.0
-55°C
1m 10m 100m 1 10
- IC Collector Current (A)
hFE v I
1.2
VCE=2V
1.0
25°C
0.8
(V)
BE(ON)
0.6
C
-55°C
- V
0.4
VCE=2V
100°C
350
300
250
200
150
100
50
0
1.2
IC/IB=10
)
FE
1.0
0.8
(V)
BE(SAT)
0.6
- V
Typical Gain (h
0.4
1m 10m 100m 1 10
-55°C
25°C
100°C
- IC Collector Current (A)
V
BE(SAT)
v I
C
1m 10m 100m 1 10
- IC Collector Current (A)
V
BE(ON)
v I
C
ZX5T1951G
Datasheet Number: DS35304 Rev. 4 - 2
5 of 7
www.diodes.com
April 2011
© Diodes Incorporated
Page 6
f
Product Line o
Diodes Incorporated
ZX5T1951G
Package Outline Dimensions
A
A1
Dim Min Max Typ
SOT223
A 1.55 1.65 1.60 A1 0.010 0.15 0.05 b1 2.90 3.10 3.00 b2 0.60 0.80 0.70
C 0.20 0.30 0.25
D 6.45 6.55 6.50
E 3.45 3.55 3.50 E1 6.90 7.10 7.00
e — — 4.60 e1 — — 2.30
L 0.85 1.05 0.95
Q 0.84 0.94 0.89
All Dimensions in mm
Suggested Pad Layout
Y1
Y2
ZX5T1951G
Datasheet Number: DS35304 Rev. 4 - 2
X2
X1
C1
C2
www.diodes.com
6 of 7
Dimensions Value (in mm)
X1 3.3 X2 1.2 Y1 1.6 Y2 1.6 C1 6.4 C2 2.3
April 2011
© Diodes Incorporated
Page 7
f
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document o r products described herein in such applica tions shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorize d application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2011, Diodes Incorporated
www.diodes.com
Diodes Incorporated
ZX5T1951G
Product Line o
ZX5T1951G
Datasheet Number: DS35304 Rev. 4 - 2
7 of 7
www.diodes.com
April 2011
© Diodes Incorporated
Loading...