Diodes ZVN4106F User Manual

Page 1
A
f
Product Line o
Diodes Incorporated
60V N-CHANNEL ENHANCEMENT MODE VERTICAL DMOSFET IN SOT23
Features
BV
R
Maximum continuous drain current I
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Qualified to AEC-Q101 Standards for High Reliability
> 60V
DSS
2.5Ω @ VGS = 10V
DS(on)
= 200mA
D
SOT23
Top View
G
Device symbol
ZVN4106F
Mechanical Data
Case: SOT23
Case Material: Molded Plastic, “Green” Molding Compound. UL
Flammability Classification Rating 94V-0
Moisture Sensitivity: Level 1 per J-STD-020
Terminals: Matte Tin Finish. Solderable per MIL-STD-202, Method
Weight: 0.008 grams (approximate)
208
e3
D
S
Pin-Out
Top View
Ordering Information (Note 4)
Part Number Marking Reel size (inches) Tape width (mm) Quantity per reel
ZVN4106FTA MZ 7 8 3000
Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free.
4. For packaging details, go to our website at http://www.diodes.com.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds.
Marking Information
ZVN4106F
Document number: DS33360 Rev. 3 - 2
www.diodes.com
MZ = Product Type Marking Code
1 of 6
July 2012
© Diodes Incorporated
Page 2
A
f
Product Line o
Diodes Incorporated
Maximum Ratings (@T
Characteristic Symbol Value Unit
Drain-Source Voltage Gate-Source Voltage Continuous Drain Current Pulsed Drain Current (Note 5)
= +25°C, unless otherwise specified.)
A
V V
DSS GSS
I
I
DM
D
60 V ±20 V 200 mA
3 A
Thermal Characteristics
Characteristic Symbol Value Unit
Power Dissipation (Note 6) Thermal Resistance, Junction to Ambient (Note 6) Operating and Storage Temperature Range
Notes: 5. Device mounted on minimum recommended pad layout test board, 10s pulse duty cycle = 1%.
6. For a device mounted on 25mm X 25mm X 1.6mm FR-4 PCV with high coverage of single sided 1oz copper, in still air condition.
P
D
R
θJA
T
, T
J
STG
350 mW 357 °C/W
-55 to +150 °C
Thermal Characteristics
ZVN4106F
ZVN4106F
Document number: DS33360 Rev. 3 - 2
2 of 6
www.diodes.com
July 2012
© Diodes Incorporated
Page 3
A
f
)
)
)
r
)
Product Line o
Diodes Incorporated
ZVN4106F
Electrical Characteristics (@T
= +25°C, unless otherwise specified.)
A
Characteristic Symbol Min Typ Max Unit Test Condition
OFF CHARACTERISTICS (Note 7)
Drain-Source Breakdown Voltage Zero Gate Voltage Drain Current TJ = +25°C I Gate-Source Leakage
On-State Drain Current
BV
I
DSS
I
GSS
D(on
DSS
60 — — V
— — 100 nA
1 — - A
10 50
VGS = 0V, ID = 10mA
= 60V, VGS = 0V
V
DS
µA
V
= 48V, VGS = 0V, TA = +125°C
DS
VGS = ±20V, VDS = 0V
VGS = 10V, VDS = 15V ON CHARACTERISTICS (Note 7) Gate Threshold Voltage
Static Drain-Source On-Resistance Forward Transconductance
V
GS(th
R
DS (on)
g
fs
1.3 — 3 V
2.5
— —
150 — - mS
5
VDS = VGS, ID = 1mA
V
= 10V, ID = 500mA
GS
Ω
= 5V, ID = 200mA
V
GS
VDS = 25V, ID = 250mA DYNAMIC CHARACTERISTICS (Note 7) Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn-On Delay Time Turn-On Rise Time Turn-Off Delay Time Turn-Off Fall Time
Notes: 7. Short duration pulse test used to minimize self-heating effect.
ZVN4106F
Document number: DS33360 Rev. 3 - 2
C
iss
C
oss
C
rss
t
D(on
t
t
D(off
t
f
www.diodes.com
35 pF 25 pF 8 pF 5 ns 7 ns 6 ns 8 ns
3 of 6
= 25V, VGS = 0V,
V
DS
f = 1.0MHz
V
= 25V, I
DS
D
= 150mA
© Diodes Incorporated
July 2012
Page 4
A
f
Product Line o
Diodes Incorporated
Electrical Characteristics (@T
= +25°C, unless otherwise specified.)
A
ZVN4106F
ZVN4106F
Document number: DS33360 Rev. 3 - 2
4 of 6
www.diodes.com
July 2012
© Diodes Incorporated
Page 5
A
f
Product Line o
Diodes Incorporated
Package Outline Dimensions
A
K
J
H
F
D
G
C
B
K1
Suggested Pad Layout
Y
Z
X
ZVN4106F
Dim Min Max Typ
A 0.37 0.51 0.40 B 1.20 1.40 1.30 C 2.30 2.50 2.40 D 0.89 1.03 0.915 F 0.45 0.60 0.535 G 1.78 2.05 1.83 H 2.80 3.00 2.90 J 0.013 0.10 0.05
M
L
C
E
K 0.903 1.10 1.00
K1 - - 0.400
L 0.45 0.61 0.55 M 0.085 0.18 0.11
α
SOT23
0° 8° -
All Dimensions in mm
Dimensions Value (in mm)
Z 2.9 X 0.8 Y 0.9 C E
2.0
1.35
ZVN4106F
Document number: DS33360 Rev. 3 - 2
5 of 6
www.diodes.com
July 2012
© Diodes Incorporated
Page 6
A
f
Product Line o
Diodes Incorporated
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorize d application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2012, Diodes Incorporated
www.diodes.com
ZVN4106F
ZVN4106F
Document number: DS33360 Rev. 3 - 2
6 of 6
www.diodes.com
July 2012
© Diodes Incorporated
Loading...