Diodes VN10LP User Manual

Page 1
f
V
y
Product Line o
60V N-CHANNEL ENHANCEMENT MODE VERTICAL DMOS FET
Features
BV
R
Maximum continuous drain current I
Totally Lead-Free & Fully RoHS compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Qualified to AEC-Q101 Standards for High Reliability
> 60V
DSS
5Ω @ VGS= 10V
DS(on)
E-Line
Top View
= 270mA
D
Device S
Mechanical Data
Case: E-Line (TO-92 Compatible)
UL Flammability Rating 94V-0
Moisture Sensitivity: Level 1 per J-STD-020
Terminals: Matte Tin Finish
Weight: 0.159 grams (approximate)
mbol
Diodes Incorporated
N10LP
Bottom View
Pin-Out
Ordering Information (Note 4)
Product Marking Package Quantity per box on tape
VN10LPSTZ VN10LP E-Line 2,000 per ammo box
VN10LP VN10LP E-Line 4,000 loose
Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds.
4. For packaging details, go to our website at http://www.diodes.com.
Marking Information
VN10LP
Document Number DS33198 Rev. 3 - 2
www.diodes.com
VN10LP = Product type Marking Code
1 of 6
September 2012
© Diodes Incorporated
Page 2
f
V
Maximum Ratings (@T
= +25°C, unless otherwise specified.)
A
Characteristic Symbol Value Unit Drain-Source Voltage Gate-Source Voltage Continuous Drain Current Pulsed Drain Current (Note 6)
V V
DSS GSS
I
I
DM
D
Thermal Characteristics (@T
= +25°C, unless otherwise specified.)
A
Characteristic Symbol Value Unit
Power Dissipation (Note 5) Thermal Resistance, Junction to Ambient (Note 5) Thermal Resistance, Junction to Leads (Note 7) Operating and Storage Temperature Range
Notes: 5. For a device mounted on 25mm X 25mm X 1.6mm FR-4 PCB with high coverage of single sided 1oz copper, in still air condition.
6. Device mounted on minimum recommended pad layout test board, 10µs pulse duty cycle = 1%.
7. Thermal resistance from junction to Drain leads 2mm outside plastic compound.
P
D
R
θJA
R
θJL
T
, T
J
STG
Diodes Incorporated
60 V ±20 V 270 mA
3 A
625 mW 200 °C/W
71 °C/W
-55 to +150 °C
Product Line o
N10LP
VN10LP
Document Number DS33198 Rev. 3 - 2
2 of 6
www.diodes.com
September 2012
© Diodes Incorporated
Page 3
f
V
)
)
(on)
(
)
Electrical Characteristics (@T
= +25°C, unless otherwise specified.)
A
Characteristic Symbol Min Typ Max Unit Test Condition
OFF CHARACTERISTICS
Drain-Source Breakdown Voltage Zero Gate Voltage Drain Current Gate-Source Leakage
BV
I
DSS
I
GSS
DSS
60
ON CHARACTERISTICS
On state Drain Current (Note 8) Gate Threshold Voltage
Static Drain-Source On-Resistance (Note 8) Forward Transconductance (Notes 8 and 10)
I
D(on
V
GS(th
R
DS (ON)
g
fs
750
0.8
100
⎯ ⎯
DYNAMIC CHARACTERISTICS (Note 10) Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn-On Time (Note 9) Turn-Off Time (Note 9)
Notes: 8. Measured under pulsed conditions. Pulse width = 300μs. Duty cycle 2%.
9. Switching characteristics are independent of operating junction temperature.
10. For design aid only, not subject to production testing.
C
iss
C
oss
C
rss
t t
off
⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯
VN10LP
Document Number DS33198 Rev. 3 - 2
3 of 6
www.diodes.com
Diodes Incorporated
V
ID = 250μA, VGS = 0V
10
±100 nA
2.5 V
5.0
7.5
60 25
5 10 10
μA
V VGS = ±20V, VDS = 0V
mA
VDS=15 V, VGS=10V ID = 1mA, VDS = VGS V
V
mS
VDS = 15V, ID = 500mA
V
pF
f = 1.0MHz
ns
V
= 60V, VGS = 0V
DS
= 10V, ID = 500mA
GS
= 5V, ID = 200mA
GS
= 25V, VGS = 0V
DS
= 15V, ID = 600mA
DD
N10LP
September 2012
© Diodes Incorporated
Product Line o
Page 4
f
V
Typical Characteristics
Product Line o
Diodes Incorporated
N10LP
VN10LP
Document Number DS33198 Rev. 3 - 2
4 of 6
www.diodes.com
September 2012
© Diodes Incorporated
Page 5
f
V
Package Outline Dimensions
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version.
Product Line o
Diodes Incorporated
N10LP
VN10LP
Document Number DS33198 Rev. 3 - 2
5 of 6
www.diodes.com
September 2012
© Diodes Incorporated
Page 6
f
V
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporat ed does not assume an y liabi lity arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause
the failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices­or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorpor ated products in such safety-critical, life support devices or systems.
Copyright © 2012, Diodes Incorporated
www.diodes.com
Diodes Incorporated
N10LP
Product Line o
VN10LP
Document Number DS33198 Rev. 3 - 2
6 of 6
www.diodes.com
September 2012
© Diodes Incorporated
Loading...