Page 1
30A BIDIRECTIONAL SURFACE MOUNT THYRISTOR SURGE PROTECTIVE DEVICE
Features
• 30A Peak Pulse Current @ 10/1000μs
• 150A Peak Pulse Current @ 8/20μs
• 58 - 320V Stand-Off Voltages
• Oxide-Glass Passivated Junction
• Bidirectional Protection In a Single Device
• High Off-State impedance and Low On-State Voltage
• Helps Equipment Meet GR-1089-CORE, IEC 61000-4-5, FCC
Part 68, ITU-T K.20/K.21, and UL497B
• UL Listed Under Recognized Component Index, File Number
156346
• Lead Free Finish/RoHS Compliant (Note 1)
• Green Molding Compound (No Halogen and Antimony)
(Note 2)
Top View
Green
TB0640L - TB3500L
Mechanical Data
• Case: SMB
• Case Material: Molded Plastic. UL Flammability Classification
Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020
• Terminals: Lead Free Plating (Matte Tin Finish). Solderable per
MIL-STD-202, Method 208
• Polarity: None; Bidirectional Devices Have No Polarity Indicator
• Weight: 0.093 grams (approximate)
Bottom View
Ordering Information (Note 3)
Part Number Case Packaging
TB0640L-13-F SMB 3000/Tape & Reel
TB0720L-13-F SMB 3000/Tape & Reel
TB0900L-13-F SMB 3000/Tape & Reel
TB1100L-13-F SMB 3000/Tape & Reel
TB1300L-13-F SMB 3000/Tape & Reel
TB1500L-13-F SMB 3000/Tape & Reel
TB1800L-13-F SMB 3000/Tape & Reel
TB2300L-13-F SMB 3000/Tape & Reel
TB2600L-13-F SMB 3000/Tape & Reel
TB3100L-13-F SMB 3000/Tape & Reel
TB3500L-13-F SMB 3000/Tape & Reel
Notes: 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied, see EU Directive 2002/95/EC Annex Notes.
2. Product manufactured with Data Code 0924 (week 24, 2009) and newer are built with Green Molding Compound.
3. For packaging details, go to our website at http://www.diodes.com.
Marking Information
TB0640L - TB3500L
Document number: DS30359 Rev. 9 - 2
xxxxx
YWW
xxxxx = Product type marking code (See Table on Page 2)
= Manufacturers’ code marking
YWW = Date code marking
Y = Last digit of year (ex: 2 for 2002)
WW = Week code (01 ~ 53)
1 of 5
www.diodes.com
May 2011
© Diodes Incorporated
Page 2
pp
θ
θ
Maximum Ratings @T
= 25°C unless otherwise specified
A
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic Symbol Value Unit
Non-Repetitive Peak Impulse Current @10/1000us
Non-Repetitive Peak On-State Current @8.3ms (one-half cycle)
Typical Positive Temperature Coefficient for Breakdown Voltage
Thermal Characteristics
Characteristic Symbol Value Unit
Thermal Resistance, Junction to Lead
Thermal Resistance, Junction to Ambient
Junction Temperature Range
Storage Temperature Range
Maximum Rated Surge Waveform
Waveform Standard Ipp (A)
2/10 us GR-1089-CORE 200
8/20 us IEC 61000-4-5 150
10/160 us FCC Part 68 100
10/700 us (Note 4) ITU-T, K.20/K.21 60
10/560 us FCC Part 68 50
10/1000 us GR-1089-CORE 30
Notes: 4. Applied 2kV, 10/700 us waveform
TB0640L - TB3500L
I
I
TSM
ΔVBR/ΔT
PP
I , PEAK PULSE CURRENT (%)
R
JL
R
JA
T
J
T
STG
Peak Value (I )
J
Half Value
30 A
15 A
0.1 %/°C
30 °C/W
120 °C/W
-40 to +150
-55 to +150
pp
t = rise time to peak value
r
t = decay time to half value
p
°C
°C
t
t
r
p
Electrical Characteristics @T
Maximum
Off-State
Leakage
Current @
DRM
Part Number
Maximum
Rated
Repetitive
Off-State
Voltage
V
(V) I
DRM
= 25°C unless otherwise specified
A
Maximum
On-State
Voltage
@ I
V
DRM
Maximum
Breakover
Voltage
(uA) VBO (V) VT (V)
= 1A
T
Breakover Current
I
BO
Min
(mA)
Max
(mA)
Holding Current
IH
Min
(mA)
Max
(mA)
Typical
Off-State
Capacitance
CO (pF)
Marking
Code
TB0640L 58 5 77 3.5 50 800 150 800 100 T064L
TB0720L 65 5 88 3.5 50 800 150 800 100 T072L
TB0900L 75 5 98 3.5 50 800 150 800 100 T090L
TB1100L 90 5 130 3.5 50 800 150 800 60 T110L
TB1300L 120 5 160 3.5 50 800 150 800 60 T130L
TB1500L 140 5 180 3.5 50 800 150 800 60 T150L
TB1800L 160 5 220 3.5 50 800 150 800 60 T180L
TB2300L 190 5 265 3.5 50 800 150 800 40 T230L
TB2600L 220 5 300 3.5 50 800 150 800 40 T260L
TB3100L 275 5 350 3.5 50 800 150 800 40 T310L
TB3500L 320 5 400 3.5 50 800 150 800 40 T350L
TB0640L - TB3500L
Document number: DS30359 Rev. 9 - 2
2 of 5
www.diodes.com
May 2011
© Diodes Incorporated
Page 3
O
R
R
O
O
TAG
TB0640L - TB3500L
Electrical Characteristics @T
= 25°C unless otherwise specified
A
Symbol Parameter
V
DRM
I
DRM
VBR
IBR
VBO
IBO
IH
VT
IPP
CO
Notes: 5. IH > (VL/RL) If this criterion is not obeyed, the TSPD triggers but does not return correctly to high-resistance state. The surge recovery time does not
exceed 30ms.
6. Off-state capa citance measured at f = 1.0MHz, 1.0V
signal, VR = 2VDC bias.
RMS
Stand-off Voltage
Leakage current at stand-off voltage
Breakdown voltage
Breakdown current
Breakover voltage
Breakover current
Holding current (Note 5)
On state voltage
Peak pulse current
Off-state capacitance (Note 6)
I
I
PP
I
BO
I
H
I
BR
I
DRM
V
T
V
V
DRM
V
BR
V
BO
100
1.2
E
1.15
10
0.1
1
V = 50V
DRM
L
WN V
1.05
EAKD
1.1
1
0.01
(DRM)
I , OFF-STATE CURRENT (uA)
MALIZED B
0.95
N
0.001
-25
0
25 50 75 100 125 150
T , JUNCTION TEMPERATURE (°C)
J
Fig. 1 Of f-State Current vs. Junction Temperature
0.9
-50
-25 0 25
T , JUNCTION TEMPERATURE (°C)
J
50
75 100
Fig. 2 Relative Variation of Brea kdown Voltag e
125
150 175
vs. Junction Temperature
TB0640L - TB3500L
Document number: DS30359 Rev. 9 - 2
3 of 5
www.diodes.com
May 2011
© Diodes Incorporated
Page 4
NOR
R
O
N VOLTAG
O
N-STATE CUR
REN
T
NOR
H
O
N
G CUR
REN
T
NOR
CAPACITAN
C
E
W
EAKD
MALIZED B
1.1
1.05
1
0.95
-25
-50
2
T , JUNCTION TEMPERATURE
Fig. 3 Rela ti ve V ar iation of Breakover Volt age
25
07550
J
vs. Junction Temperature
150
175
125100
(ºC)
100
(A)
T
I,
10
1
1
254376
V , ON-STATE VOLTAGE (V)
Fig. 4 On-State Current vs. On-State Voltage
1
T
TB0640L - TB3500L
T = 25°C
j
9
8
E
1.5
LDI
1
MALIZED
0.5
0
-50 -25
T , JUNCTION TEMPERATURE (°C)
J
Fig. 5 Relative V ariation of Holding Current vs.
25 50 10075 125
0
Junction Temper ature
MALIZED
0.1
110100
Fig. 6 Relative V ariation of Junction Capacitance
V , REVERSE VOLTAGE (V)
R
vs. Reverse Voltage B ia s
Package Outline Dimensions
A
J
TB0640L - TB3500L
Document number: DS30359 Rev. 9 - 2
B
C
D
G
H
All Dimensions in mm
SMB
Dim Min Max
A 3.30 3.94
B 4.06 4.57
C 1.96 2.21
D 0.15 0.31
E 5.00 5.59
G 0.05 0.20
H 0.76 1.52
J 2.00 2.50
E
4 of 5
www.diodes.com
May 2011
© Diodes Incorporated
Page 5
TB0640L - TB3500L
Suggested Pad Layout
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorize d application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2011, Diodes Incorporated
www.diodes.com
X
Y
C
SMB
Dimensions
Z 6.8
G 1.8
X 2.3
G
Z
IMPORTANT NOTICE
LIFE SUPPORT
Y 2.5
C 4.3
Value (in mm)
TB0640L - TB3500L
Document number: DS30359 Rev. 9 - 2
5 of 5
www.diodes.com
May 2011
© Diodes Incorporated
Loading...