Diodes SBR8U60P5 User Manual
Features
Ultra Low Forward Voltage Drop
Patented Super Barrier Rectifier Technology
Soft, Fast Switching Capability
150°C Operating Junction Temperature
Lead-Free Finish; RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
NEW PRODUCT
Top View Bottom View
POWERDI5
SBR8U60P5
Green
SUPER BARRIER RECTIFIER
Mechanical Data
Case: POWERDI5
Case Material: Molded Plastic, “Green” Molding compound. UL
Flammability Classification Rating 94V-0
Moisture Sensitivity: Level 1 per J-STD-020
Terminals: Finish - Matte Tin annealed over Copper leadframe.
Solderable per MIL-STD-202, Method 208
Polarity: See Below
Weight: 0.093 grams (approximate)
LEFT PIN
RIGHT PIN
Note: Pins Left & Right must
be electrically connected
at the printed circuit board.
BOTTOMSIDE
HEAT SINK
8A SBR
POWERDI
®
®
Ordering Information (Note 4)
Part Number Case Packaging
SBR8U60P5-13D (Note 5) POWERDI5 5000/Tape & Reel
Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
SBR8U60P5-13 POWERDI5 5000/Tape & Reel
SBR8U60P5-7 POWERDI5 1500/Tape & Reel
4. For packaging details, go to our website at http”//www.diodes.com/products/packages.html.
5. “D” suffix designate for the 12mm Tape and Reel option.
Marking Information
SBR and POWERDI are registered trademarks of Diodes Incorporated.
S8U60
YYWWK
SBR8U60P5
Document number: DS31731 Rev. 8 - 2
S8U60 = Product Type Marking Code
= Manufacturers’ Code Marking
YYWW = Date Code Marking
YY = Last Two Digits of Year (ex: 13 for 2013)
WW = Week Code (01 - 53)
K = Factory Designator
1 of 5
www.diodes.com
April 2013
© Diodes Incorporated
Maximum Ratings (@T
= +25°C, unless otherwise specified.)
A
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic Symbol Value Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
Average Rectified Output Current
Non-Repetitive Peak Forward Surge Current 8.3ms
Single Half Sine-Wave Superimposed on Rated Load
Repetitive Peak Avalanche Power (1µs, +25°C)
NEW PRODUCT
Thermal Characteristics
Characteristic Symbol Value Unit
Maximum Thermal Resistance
Thermal Resistance Junction to Soldering (Note 6)
Thermal Resistance Junction to Ambient (Note 7)
Operating and Storage Temperature Range
SBR8U60P5
V
RRM
V
RWM
V
RM
I
O
I
FSM
P
ARM
R
θJS
R
θJA
T
, T
J
STG
60 V
8 A
280 A
5,000 W
3
°C/W
60
-65 to +150 °C
Electrical Characteristics (@T
= +25°C, unless otherwise specified.)
A
Characteristic Symbol Min Typ Max Unit Test Condition
Forward Voltage Drop
—
V
F
—
0.30
0.46
—
Leakage Current (Note 8)
Notes: 6. Theoretical R
7. Polymide PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com.
8. Short duration pulse test used to minimize self-heating effect.
calculated from the top center of the die straight down to the PCB cathode tab solder junction.
θJS
I
R
—
—
0.12
—
—
0.35
0.53
0.5
0.6
100
V
mA
= 1.0A, TJ = +25°C
I
F
I
= 8A, TJ = +25°C
F
I
= 8A, TJ = +125°C
F
V
= 60V, TJ = +25°C
R
= 60V, TJ = +125°C
V
R
SBR and POWERDI are registered trademarks of Diodes Incorporated.
SBR8U60P5
Document number: DS31731 Rev. 8 - 2
2 of 5
www.diodes.com
April 2013
© Diodes Incorporated
Loading...