Diodes SBR2U150SA User Manual

Page 1
A
A
Features
Ultra Low Forward Voltage Drop
Excellent High Temperature Capability
Patented Super Barrier Rectifier Technology
Soft, Fast Switching Capability
175°C Operating Junction Temperature
Lead-Free Finish; RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Top View
SBR2U150SA
Green
2.0A SBR
®
SURFACE MOUNT SUPER BARRIER RECTIFIER
Mechanical Data
Case: SMA
Case Material: Molded Plastic, UL Flammability Classification
Rating 94V-0
Moisture Sensitivity: Level 1 per J-STD-020
Terminal Connections: Lead Free Plating (Matte Tin Finish.)
Solderable per MIL-STD-202, Method 208
Polarity Indicator: Cathode Band
Weight: 0.064 grams (approximate)
SMA
Bottom View
Ordering Information (Note 4)
Part Number Case Packaging
SBR2U150SA-13 SMA 5000/Tape & Reel
Notes: 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds.
4. For packaging details, go to our website at http://www.diodes.com/products/packages.html.
Marking Information
YWW
Sxx
B
SBR2U150SA
Document number: DS31875 Rev. 6 - 2
S D B or S Q B = Product Type Marking Code
= Manufacturers’ code marking YWW = Date Code Marking Y = Last digit of year (ex: 9 for 2009) WW = Week code (01 – 53)
B = Foundry and Assembly Code
1 of 5
www.diodes.com
May 2013
© Diodes Incorporated
Page 2
P
P
O
R
PATIO
Maximum Ratings (@T
= +25°C, unless otherwise specified.)
A
Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%.
Characteristic Symbol Value Unit
Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage
Average Rectified Output Current (See Figure 1)
Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load
Maximum Voltage Rate of Change (Rated VR)
Thermal Characteristics
Characteristic Symbol Value Unit
Thermal Resistance Junction to Soldering (Note 4)
Thermal Resistance Junction to Ambient (Note 5)
Thermal Resistance Junction to Ambient (Note 6)
Operating and Storage Temperature Range
SBR2U150SA
V
RRM
V
RWM
V
RM
I
O
I
FSM
dv/dt 10,000 V/µs
R
θJS
R
θJA
R
θJA
T
, T
J
STG
150 V
2.0 A
42 A
3
119
°C/W
88
-65 to +175 °C
Electrical Characteristics (@T
= +25°C, unless otherwise specified.)
A
Characteristic Symbol Min Typ Max Unit Test Condition
Reverse Breakdown Voltage (Note 7)
Forward Voltage Drop
Leakage Current (Note 6)
Notes: 4. Theoretical R
5. FR-4 PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com. T
6. Polymide PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com
7. Short duration pulse test used to minimize self-heating effect.
calculated from the top center of the die straight down to the PCB cathode tab solder junction.
JS
V
(BR)R
V
F
I
R
2.0
150 — — V
— —
— —
— —
— —
10
1.8
N (W)
DISSI
WE
,
D
1.6
1.4
1.2
1.0
0.8
0.6
0.4
1
0.1
0.01
0.001
= 25ºC
A
T = 150°C
A
T = 125°C
A
0.8
0.65
V
75 µA
10 mA
T = 25°C
A
IR = 100µA
= 2.0A, TJ = +25C
I
F
I
= 2.0A, TJ = +125°C
F
= 150V, TJ = +25°C
V
R
V
= 150V, TJ = +125°C
R
0.2
F
I , INSTANTANEOUS FORWARD CURRENT (A)
0
01 2 34
I , AVERAGE FORWARD CURRENT (A)
F(AV)
Fig. 1 Forward Power Dissipation
0.0001 0 100 200 300 400 500 600 700 800 900
V , INSTANTANEOUS FORWARD VOLTAGE (mV)
F
Fig. 2 Typical Forward Characteristics
SBR2U150SA
Document number: DS31875 Rev. 6 - 2
2 of 5
www.diodes.com
May 2013
© Diodes Incorporated
Page 3
SBR2U150SA
10,000
1,000
T = 150°C
A
T = 125°C
A
10,000
1,000
f = 1MHz
100
10
100
1
R
0.1
I , INSTANTANEOUS REVERSE CURRENT (uA)
020406080100
V , INSTANTANEOUS REVERSE VOLTAGE (V)
R
Fig. 3 Typical Reve rse Characteristi cs
3.5
A
T = -55°C
A
120 140
T
C , TOTAL CAPACITANCE (pF)
10
0.1 1 10 100 V , DC REVERSE VOLTAGE (V)
R
Fig. 4 Total Capacitance vs. Reverse Voltage
T = 25°C
3.0
2.5
2.0
1.5
Note 6
Note 5
1.0
0.5
F(AV)
I , AVERAGE FORWARD CURRENT (A)
0
0 25 50 75 100 125 175
T , AMBIENT TEMPERATURE (°C)
A
Fig. 5 DC Forward Current Derating Curve
1
0.1
0.01
150
r(t), TRANSIENT THERMAL RESISTANCE
0.001
0.00001 0.0001 0.001 0.01 0.1 1 10 100 1,000
SBR2U150SA
Document number: DS31875 Rev. 6 - 2
t1, PULSE DURATION TIMES (sec) Fig. 6 Transient Thermal Resistance
3 of 5
www.diodes.com
R (t) = r(t) * R

JA JA
R = 88°C/W
JA
Duty Cycle, D = t1/ t2
May 2013
© Diodes Incorporated
Page 4
Package Outline Dimensions
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version.
A
J
H
B
C
D
G
E
Dim Min Max
A 2.29 2.92 B 4.00 4.60 C 1.27 1.63 D 0.15 0.31 E 4.80 5.59 G 0.05 0.20 H 0.76 1.52 J 2.01 2.30
All Dimensions in mm
Suggested Pad Layout
Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version.
Y
X
X1
Dimensions Value (in mm)
G
C
SBR2U150SA
Document number: DS31875 Rev. 6 - 2
4 of 5
www.diodes.com
SMA
C 4.00 G 1.50 X 2.50
X1 6.50
Y 1.70
SBR2U150SA
May 2013
© Diodes Incorporated
Page 5
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks.
This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2013, Diodes Incorporated
www.diodes.com
SBR2U150SA
SBR2U150SA
Document number: DS31875 Rev. 6 - 2
5 of 5
www.diodes.com
May 2013
© Diodes Incorporated
Loading...