Product Summary
V
(V) IO (A) V
RRM
30 15 0.49 0.3
(MAX)
F
(V) I
Description
This Super Barrier Rectifier (SBR) diode has been designed to meet
the stringent requirements of Automotive Applications. It is ideally
suited to use as :
Applications
Polarity Protection Diode
Re-circulating Diode
Switching Diode
NEW PRODUCT ADVANCED INFORMATION
Top View
POWERDI5
(mA)
R(MAX)
Bottom View
SBR15U30SP5Q
Green
SUPER BARRIER RECTIFIER
POWERDI
Features and Benefits
Patented SBR technology provides a superior avalanche
capability than schottky diodes ensuring more rugged and
reliable end applications.
Reduced Ultra-low forward voltage drop (V
and cooler operation.
Reduced high temperature reverse leakage; Increased reliability
against thermal runaway failure in high temperature operation
Lead-Free Finish; RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Qualified to AEC-Q101 Standards for High Reliability
); better efficiency
F
Mechanical Data
Case: POWERDI5
Case Material: Molded Plastic, “Green” Molding compound. UL
Flammability Classification Rating 94V-0
Moisture Sensitivity: Level 1 per J-STD-020
Terminals: Finish - Matte Tin annealed over Copper leadframe.
Solderable per MIL-STD-202, Method 208
Polarity: See Below
Weight: 0.093 grams (approximate)
LEFT PIN
RIGHT PIN
Note: Pins Left & Right must
be electrically connected
at the printed circuit board.
BOTTOMSIDE
HEAT SINK
15A SBR
®
®
5
Ordering Information (Note 4)
Part Number Case Packaging
SBR15U30SP5Q-13 POWERDI5 5000/Tape & Reel
Notes: 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
4. For packaging details, go to our website at http”//www.diodes.com/products/packages.html.
Marking Information
SBR and POWERDI are registered trademarks of Diodes Incorporated.
S15U30S
YYWWK
SBR15U30SP5Q
Document number: DS36115 Rev. 2 - 2
S15U30S = Product Type Marking Code
= Manufacturers’ Code Marking
K = Factory Designator
YYWW = Date Code Marking
YY = Last Two Digits of Year (ex: 13 for 2013)
WW = Week code (01 - 53)
1 of 6
www.diodes.com
April 2013
© Diodes Incorporated
Maximum Ratings (@T
= +25°C, unless otherwise specified.)
A
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic Symbol Value Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
Average Rectified Output Current
Non-Repetitive Peak Forward Surge Current 8.3ms
Single Half Sine-Wave Superimposed on Rated Load
Non-Repetitive Avalanche Energy
(T
= +25°C, IAS = 14.5A, L = 8.5mH)
J
Repetitive Peak Avalanche Energy (1µs, +25°C)
NEW PRODUCT ADVANCED INFORMATION
Thermal Characteristics
V
V
V
V
R(RMS)
I
E
P
RRM
RWM
RM
I
O
FSM
AS
ARM
SBR15U30SP5Q
30 V
21 V
15 A
280 A
1074 mJ
20000 W
Characteristic Symbol Value Unit
Typical Thermal Resistance Junction to Ambient (Note 5)
Operating Temperature Range
Storage Temperature Range
R
T
θJA
T
STG
J
Electrical Characteristics (@T
= +25°C, unless otherwise specified.)
A
Characteristic Symbol Min Typ Max Unit Test Condition
Forward Voltage Drop (Per Leg) (Note 6)
Leakage Current (Note 6)
Total Capacitance
Notes: 5. Polymide, 2oz. Copper 16x minimum recommended pad layout per http://www.diodes.com
6. Short duration pulse test used to minimize self-heating effect.
SBR and POWERDI are registered trademarks of Diodes Incorporated.
V
F
I
R
C
T
SBR15U30SP5Q
Document number: DS36115 Rev. 2 - 2
—
—
—
—
— 400 — pf
www.diodes.com
0.42
0.35
0.1
9.5
2 of 6
26 °C/W
-55 to +150 °C
-55 to +175 °C
= 15A, TJ = +25°C
0.49
0.42
0.3
30
V
mA
I
F
= 15A, TJ = +125°C
I
F
V
= 30V, TJ = +25°C
R
= 30V, TJ = +125°C
V
R
VR = 30V, f = 1MHz
April 2013
© Diodes Incorporated