Diodes SBR12U120P5 User Manual
Features
• Ultra Low Forward Voltage Drop
• Excellent High Temperature Stability
• Patented Super Barrier Rectifier Technology
• Soft, Fast Switching Capability
• 150ºC Operating Junction Temperature
• Lead-Free Finish; RoHS Compliant (Notes 1 & 2)
• Halogen and Antimony Free. “Green” Device (Note 3)
Top View
POWERDI5
Bottom View
SBR12U120P5
Green
SUPER BARRIER RECTIFIER
Mechanical Data
• Case: POWERDI5
• Case Material: Molded Plastic, “Green” Molding Compound.
UL Flammability Classification Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020
• Terminals: Matte Tin Finish annealed over Copper leadframe.
Solderable per MIL-STD-202, Method 208
• Polarity: See Diagram
• Weight: 0.093 grams (approximate)
LEFT PIN
RIGHT PIN
Note: Pins Left & Right must
be electrically connected
at the printed circuit board.
BOTTOMSIDE
HEAT SINK
12.0A SBR
POWERDI
®
®
Ordering Information (Note 4)
Part Number Case Packaging
SBR12U120P5-13 POWERDI5 5,000/Tape & Reel
SBR12U120P5-13D (Note 5) POWERDI5 5,000/Tape & Reel
SBR12U120P5-7 POWERDI5 15,00/Tape & Reel
Notes: 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied.
2. See http://www.diodes.com for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
4. For packaging details, go to our website at http://www.diodes.com.
5. Suffix -13D is designated for 12mm tape width.
Marking Information
SBR and POWERDI are registered trademarks of Diodes Incorporated.
S12U120
YYWWK
SBR12U120P5
Document number: DS32064 Rev. 4 - 2
S12U120 = Product Type Marking Code
= Manufacturers’ Code Marking
YYWW = Date Code Marking
YY = Last Two Digits of Year (ex: 10 for 2010)
WW = Week Code (01 - 53)
K = Factory Designator
1 of 5
www.diodes.com
October 2012
© Diodes Incorporated
θ
Maximum Ratings (@T
= +25°C, unless otherwise specified.)
A
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic Symbol Value Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
Average Rectified Output Current (See Figure 1)
Non-Repetitive Peak Forward Surge Current 8.3ms
Single Half Sine-Wave Superimposed on Rated Load
Thermal Characteristics
Characteristic Symbol Value Unit
Maximum Thermal Resistance Junction to Ambient (Note 6)
Operating and Storage Temperature Range
SBR12U120P5
V
RRM
V
RWM
V
RM
I
O
I
FSM
R
JA
T
, T
J
STG
120 V
12 A
250 A
27 ºC/W
-65 to +150 ºC
Electrical Characteristics (@T
= +25°C, unless otherwise specified.)
A
Characteristic Symbol Min Typ Max Unit Test Condition
Forward Voltage Drop
Leakage Current (Note 7)
Notes: 6. Device mounted on Polymide PCB with 16x recommended pad layout.
7. Short duration pulse test used to minimize self-heating effect.
V
F
I
R
-
-
-
-
-
0.63
-
2
0.80
0.68
0.25
35
V
mA
= 12A, TJ = +25ºC
I
F
= 12A, TJ = +125ºC
I
F
= 120V, TJ = +25ºC
V
R
V
= 120V, TJ = +125ºC
R
SBR and POWERDI are registered trademarks of Diodes Incorporated.
SBR12U120P5
Document number: DS32064 Rev. 4 - 2
2 of 5
www.diodes.com
October 2012
© Diodes Incorporated
Loading...