Diodes SBR12U100P5Q User Manual
Green
Product Summary
V
(V) IO (A) V
RRM
100 12 0.78 0.25
max (V) @ +25°C I
F
(mA) @ +25°C
R max
Description and Applications
This Super Barrier Rectifier (SBR) diode has been designed to meet the
stringent requirements of Automotive Applications. It is ideally suited to
use as:
Polarity Protection Diode
Re-circulating Diode
Switching Diode
Features
100% Avalanche Tested.
Patented SBR technology provides a superior avalanche
capability than schottky diodes ensuring more rugged and
reliable end applications.
Reduced ultra-low forward voltage drop (V
and cooler operation.
Reduced high temperature reverse leakage; increased reliability
against thermal runaway failure in high temperature operation
Lead-Free Finish; RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Qualified to AECQ101
Mechanical Data
Case: POWERDI5
Case Material: Molded Plastic, “Green” Molding compound. UL
Flammability Classification Rating 94V-0
Moisture Sensitivity: Level 1 per J-STD-020
Terminals: Matte Tin Finish annealed over Copper leadframe.
Solderable per MIL-STD-202, Method 208
Polarity: See Diagram
Weight: 0.093 grams (approximate)
POWERDI®5
Top View
Bottom View
LEFT PIN
RIGHT PIN
Note: Pins Left & Rig ht
be
electrically connected
at the
printed circuit
SBR12U100P5Q
12A SBR
SUPER BARRIER RECTIFIER
POWERDI
); better efficiency
F
BOTTOMSIDE
HEAT SINK
must
®
5
®
Ordering Information (Note 4)
Part Number Compliance Case Packaging
SBR12U100P5Q-13 Automotive
SBR12U100P5Q-13D Automotive
Notes: 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
4. For packaging details, go to our website at http://www.diodes.com/products/packages.html
5. “D” suffix designate for the 12mm Tape and Reel option.
POWERDI5
POWERDI5
5000/Tape & Reel
5000/Tape & Reel
Marking Information
SBR and POWERDI are registered trademarks of Diodes Incorporated.
SBR12U100P5Q
Document number: DS36325 Rev. 1 - 0
S12U100
YYWWK
www.diodes.com
S12U100 = Product Type Marking Code
= Manufacturers’ Code Marking
YYWW
=
YY = Last Two Digits of Year (ex: 13 for 2013)
WW = Week Code (01 - 53)
K = Factory Designator
1 of 5
Date Code Marking
July 2013
© Diodes Incorporated
T
T
O
U
O
R
R
C
U
R
RENT
Maximum Ratings (@T
= +25°C, unless otherwise specified.)
A
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic Symbol Value Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
Average Rectified Output Current
Non-Repetitive Peak Forward Surge Current 8.3ms
Single Half Sine-Wave Superimposed on Rated Load
Non-Repetitive Avalanche Energy
= +25°C, IAS = 12A, L = 10mH)
(T
J
Repetitive Peak Avalanche Energy (1µs, +25°C)
Thermal Characteristics
Characteristic Symbol Value Unit
Typical Thermal Resistance Junction to Ambient (Note 6)
Typical Thermal Resistance Junction to Lead
Operating and Storage Temperature Range
Electrical Characteristics (@T
= +25°C, unless otherwise specified.)
A
V
V
V
I
FSM
E
P
R
R
T
J, STG
RRM
RWM
RM
I
O
AS
ARM
θJA
θJL
SBR12U100P5Q
100 V
12 A
250 A
592 mJ
12000 W
27 °C/W
3
°C/W
-55 to +150 °C
Characteristic Symbol Min Typ Max Unit Test Condition
—
Forward Voltage Drop
V
F
—
—
Leakage Current (Note 7)
Notes: 6. Polymide, 2oz. Copper 16x minimum recommended pad layout per http://www.diodes.com
7. Short duration pulse test used to minimize self-heating effect.
I
R
—
—
5.0
4.5
Note 6
4.0
3.5
0.49
0.67
0.58
0.06
11
(A)
D
100
10
1
3.0
WA
2.5
2.0
1.5
D
P , POWER DISSIPATION (W)
1.0
S F
ANE
AN
0.1
0.01
0.001
0.5
F
I , INS
0
0.0001
02 46 810
I AVERAGE FORWARD CURRENT (A)
F(AV)
Figure 1 Forward Power Dissipation
= 5A, TJ = +25°C
—
0.78
—
0.25
40
T = 125°C
A
T = 85°C
A
T = 25°C
A
V
mA
I
F
I
= 12A, TJ = +25°C
F
I
= 12A, TJ = +125°C
F
V
= 100V, TJ = +25°C
R
= 100V, TJ = +125°C
V
R
0 0.2 0.4 0.6 0.8 1.0
V , INSTANT ANEOUS FORW ARD VOLTAGE (V)
F
Figure 2 Typical Fo r w a r d C haracte r istics
SBR and POWERDI are registered trademarks of Diodes Incorporated.
SBR12U100P5Q
Document number: DS36325 Rev. 1 - 0
www.diodes.com
2 of 5
July 2013
© Diodes Incorporated
Loading...