Diodes SBR10U45SP5Q User Manual
Product Summary
V
(V) IO (A) V
RRM
45 10 0.47 0.3
MAX (V) @+25°C I
F
(mA) @+25°C
R MAX
Description and Applications
This Super Barrier Rectifier (SBR) diode has been designed to meet
the stringent requirements of Automotive Applications. It is ideally
suited to use as :
Polarity Protection Diode
Re-circulating Diode
Switching Diode
POWERDI®5
Top View Bottom View
SBR10U45SP5Q
SUPER BARRIER RECTIFIER
POWERDI
Features and Benefits
100% Avalanche Tested.
Patented SBR technology provides a superior avalanche
capability than schottky diodes ensuring more rugged and
reliable end applications.
Reduced ultra-low forward voltage drop (V
and cooler operation.
Reduced high temperature reverse leakage; increased reliability
against thermal runaway failure at high temperature
Lead-Free Finish; RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Qualified to AEC-Q101 Standards for High Reliability
); better efficiency
F
Mechanical Data
Case: POWERDI5
Case Material: Molded Plastic, “Green” Molding Compound.
UL Flammability Classification Rating 94V-0
Moisture Sensitivity: Level 1 per J-STD-020
Terminals: Finish – Matte Tin annealed over Copper leadframe.
Solderable per MIL-STD-202, Method 208
Weight: 0.093 grams (approximate)
LEFT PIN
RIGHT PIN
Note: Pins Left & Right must
be electrically connected
at the printed circuit board.
BOTTOMSIDE
HEAT SINK
10A SBR
®
®
5
Ordering Information (Note 4)
Part Number Compliance Case Packaging
SBR10U45SP5Q-13 Automotive POWERDI5 5000/Tape & Reel
Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
4. For packaging details, go to our website at http://www.diodes.com/products/packages.html.
Marking Information
SBR and POWERDI are registered trademarks of Diodes Incorporated.
S10U45S
YYWWK
SBR10U45SP5Q
Document number: DS36358 Rev. 1 - 2
S10U45S = Product Type Marking Code
= Manufacturers’ Code Marking
K = Factory Designator
YYWW = Date Code Marking
YY = Last Two Digits of Year (ex: 13 for 2013)
WW = Week code (01 - 53)
1 of 6
www.diodes.com
June 2013
© Diodes Incorporated
Maximum Ratings (@T
= +25°C, unless otherwise specified.)
A
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic Symbol Value Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
Average Rectified Output Current
Non-Repetitive Peak Forward Surge Current 8.3ms
Single Half Sine-Wave Superimposed on Rated Load
Repetitive Peak Avalanche Power (1µs, +25°C)
Non-Repetitive Avalanche Energy
= +25°C, IAS = 12A, L = 10mH)
(T
J
Thermal Characteristics
Characteristic Symbol Value Unit
Maximum Thermal Resistance
Thermal Resistance Junction to Ambient (Note 5)
Thermal Resistance Junction to Ambient (Note 6)
Storage Temperature Range
V
V
V
V
R(RMS)
I
P
E
R
R
T
RRM
RWM
RM
I
O
FSM
ARM
AS
θJA
θJA
STG
SBR10U45SP5Q
45 V
32 V
10 A
275 A
5630 W
530 mJ
73
°C/W
31
-55 to +150 °C
Electrical Characteristics (@T
= +25°C, unless otherwise specified.)
A
Characteristic Symbol Min Typ Max Unit Test Condition
Reverse Breakdown Voltage (Note 7)
Forward Voltage Drop
Leakage Current (Note 7)
Notes: 5. FR-4 PCB, 2oz. Copper. Minimum recommended pad layout per http://www.diodes.com.
6. Polymide PCB, 2oz. Copper. Cathode pad dimensions 18.8mm x 14.4mm. Anode pad dimensions 5.6mm x 14.4mm
7. Short duration pulse test used to minimize self-heating effect.
SBR and POWERDI are registered trademarks of Diodes Incorporated.
V
(BR)R
V
F
I
R
SBR10U45SP5Q
Document number: DS36358 Rev. 1 - 2
45 — — V
—
—
—
—
—
0.41
0.44
0.38
0.09
30
—
0.47
—
0.3
—
V
mA
2 of 6
www.diodes.com
IR = 0.3mA
= 8A, TJ = +25°C
I
F
= 10A, TJ = +25°C
I
F
= 10A, TJ = +125°C
I
F
V
= 45V, TJ = +25°C
R
= 45V, TJ = +125°C
V
R
June 2013
© Diodes Incorporated
Loading...